• 조명전기설비학회논문지
• /
• 제24권9호
• /
• pp.124-128
• /
• 2010

In this paper, the shielding effectiveness of aluminum shielded room with using eddy-current is calculated and measured after fabricated. The size and thickness of shielded room are decided as $2.4{\times}2.4{\times}2.4[m^3]$ and 12[mm] after AC shielding characteristics by eddy-current of conductive materials is analyzed. To verify the shielding effectiveness, a rectangular helmholtz coil is fabricated to generate magnetic field of 1.37[${\mu}T$] and measured magnetic field inside shielding room for 0.01~10[Hz]. According to calculations and measurements, AC Shielding effectiveness by eddy-current in aluminum is very small for 0.01~2[Hz] and 5 times to 11 times for 5~10[Hz].

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.456-463
• /
• 2018

With the development of weapon systems by mounting various sensors, it makes important to analyze the precise functioning of sensor to external environment. In the case of small arms with magnetic sensor, the malfunction of small arms might be caused by strong external magnetic fields. In this study, the effects of magnetic sensor on external magnetic fields were analyzed, and optimal magnetic shield and shield structure were designed through M&S. In addition, the magnetic-shielding effectiveness of magnetic sensor in small arms was verified with commercial shielding materials. As a result, it was demonstrated that the Fe-Cu-Si-Nd-B with the structure of multi-layer metallic shields was shown the magnetic-shielding effectiveness of 83 % for an external permanent magnet and 19 % for an alternating magnetic field of 180 dBpT at 60 Hz, respectively.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.173-176
• /
• 2008

In this study, a new kind of instrument for measuring the magnetic shielding effectiveness (MSE) was developed using a double yoke; one a magnetizing yoke and the other a sensing yoke. Using the developed instrument, the MSE could be measured for a steel sheet specimen in the ELF range, where the magnetic permeability contributes to the MSE at low frequencies and eddy currents contributes to the MSE high frequencies with < 0.1 dB reproducibility. The developed measuring method can be applied to quality control in a steel sheet company producing EMI/EMC shielding materials.

• 한국인터넷방송통신학회논문지
• /
• 제19권3호
• /
• pp.59-65
• /
• 2019

마그네틱 프로브와 노이즈 소스의 근거리장에 금속 차폐막이 놓여있을 때 차폐막 두께에 따른 EMI 차폐효과를 분석하였다. 노이즈 소스로는 마이크로스트립 라인을 이용하였으며, 금속 차폐막 재료로는 그래파이트와 페라이트를 선정하였다. 마그네틱 프로브는 IEC 61967-6 방식을 적용하여 마그네틱 프로브를 이용한 전자기 방사 측정 방법을 사용하였다. 마이크로스트립 라인과 마그네틱 프로브 사이의 투과계수를 분석하였고, 둘 사이의 거리는 단일 차폐막일 경우 1 mm, 다중 차폐막일 경우 5 mm로 수행하였다. 차폐막의 두께는 5 um, 10 um, 30 um, 50 um 으로 변화시켰다. 주파수를 150 kHz에서 1 GHz까지 변화시켰을 경우 최대 44.9 dB의 SE(Shielding Effectiveness)를 얻었다.

• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.30-40
• /
• 2013

In this study the method based on flux linkage in cell was introduced in calculation of eddy currents by cell method. According to this method eddy current distribution and the loss can be evaluated and since the shielding effectiveness by flux cancelation of eddy current can be analyzed, this method is applicable to design of conductive shield. And also the formula of shielding factor were so deduced as to be applicable to finite-width infinite-length shielding sheets and infinite-length underground cable shield. These formula are adaptable to magnetic materials as well as conductive materials. As the results of calculation in model shields are follows. In case of finite-width infinite-length shielding sheet, shielding effectiveness increases with increasing of conductivity. In case of infinite-length underground cable shield, the effectiveness become higher with increasing of permeability. Especially the effectiveness is very high in materials with both high conductivity and permeability in underground cable shield.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.78-82
• /
• 2011

In this paper, magnetic field compensation system with an open architecture and can be installed indoors is designed and measured by fabricated. To verify the shielding effectiveness, two rectangular helmholtz coils with 3-axis are fabricated to generate magnetic field and measured magnetic field inside compensation coil for 1~60[Hz], According to measurements, AC shielding effectiveness of compensation system is 96[%] of 1[Hz], 95[%] of 30[Hz] and 90[%] of 60[Hz]. The performance of system therefore can be used as the magnetically shielded room for medical and industrial field.

• 마이크로전자및패키징학회지
• /
• 제11권3호
• /
• pp.31-36
• /
• 2004

연자성 차폐필름에 대하여 ASTM 방법 및 2-port flanged coaxial line 방법으로 RF (radio-frequency) 영역에서 전자기파 차폐특성을 측정하여 원역장에서의 차폐요인을 정량적으로 분석하였다. 4-13.5 GHz의 고주파 영역에서 연자성 차폐필름의 차폐효과는 반사손실에 의한 효과가 아니라 주로 흡수손실에 의한 차폐효과를 가졌다.

• 마이크로전자및패키징학회지
• /
• 제23권2호
• /
• pp.57-63
• /
• 2016

We developed a flexible and micro-thick electromagnetic interference (EMI) shielding nanofabric layer that also functions as a water resisting and heat sinking material. Electrospinning followed by a simple heat treatment process was carried on to produce the EMI-shielding Ni/C hybrid nanofibers. The ambient oxygen partial pressure ($pO_2$ = 0.1, 0.7, 1.3 Torr) applied during the heat treatment was varied in order to optimize the effectiveness of EMI-shielding by modifying the size and crystallinity of the magnetic Ni nanoparticles distributed throughout the C nanofibers. Permittivity and permeability of the nanofibers under the electromagnetic (EM) wave frequency range of 300 MHz~1 GHz were measured, which implied the EMI-shielding effectiveness (SE) optimization at $pO_2$ = 0.7 Torr during the heat treatment. The materials' heat diffusivity for both in-plane direction and vertical direction was measured to confirm the anisotropic thermal diffusivity that can effectively deliver and sink the local heat produced during device operations. Also, the nanofibers were aged at room temperature in oxygen ambient for water resisting function.

• 전자공학회논문지
• /
• 제51권1호
• /
• pp.211-218
• /
• 2014

본 논문에서는 NFC 나 핸드폰, 컴퓨터 등의 정보통신기기에 사용하기 위한 높은 주파수 대역의 전자파 차폐 필름을 개발하기 위하여, 주로 자계를 차폐할 수 있는 니켈 및 실리콘과 철의 합금의 연자성 특성을 연구함에 있어 최적의 합금조성으로 Fe-Si-Cr 합금과 Fe-Ni-Cr 합금의 자성특성에 대하여 연구하였고, 그 결과에 의하여 결정된 합금의 조성비에 따라 각 합금을 용융상태에서 수분산시켜 원형 편상의 연자성 합금분말을 만들었으며, 그들을 수지에 함침시키고 가열 회전 롤러를 이용한 캘린더 가공법으로 두께 0.1 mm 및 1 mm 의 필름을 만든 다음, 저주파에서부터 10GHz 마이크로파대역까지의 전자파에 대한 투자율과 차폐율에 대하여 연구하였다. 또한 본 논문에서는 합금 분말입자의 제조에 앞서, 합금의 투자율을 예측할 수 있는 식을 제안하였으며, 그 식의 합리성을 증명하기 위해 MATLAB을 이용하여 기 발표된 합금들의 투자율과 주파수 특성을 비교적 정확하게 기술하고 있음을 보였고, 그로부터 가장 이상적인 합금의 조성비를 결정하고, 분말입자가 수지에 함침된 필름의 투자율 역시 계산하였다. 전자파 차폐 수지 필름의 차폐율(Shielding Effectiveness)에 대한 시뮬레이션은 HFSS를 이용하였다.

• 한국전자파학회지:전자파기술
• /
• 제2권2호
• /
• pp.25-29
• /
• 1991

본 논문에서는 전자기파의 기본 차폐식을 이용하여 금속인 모재에 얇은 두께의 박판으로 접합되어 있는 경우의 차례이론식을 유도하여, 대표적인 금속 평판 쉴드로 비자성 재료인 Aluminium과 Steel에 전도성도료를 칠했을 경우에 평면파에 대한 차폐 효과를 조사하였다.