• 센서학회지
• /
• 제16권1호
• /
• pp.11-16
• /
• 2007

CuO is an important transition metal oxide with many practical applications such as catalysts, p-type semiconductor, solar cells, magnetic storage media and cathode materials. In this contribution, nanocrystalline CuO powders were prepared by solution reduction method using copper chloride ($CuCl_{2}{\cdot}2H_{2}O$), hydrazine ($N_{2}H_{4}$) and NaOH and subsequent heat treatment. The gas sensor using nanocrystalline CuO powders showed high sensitivities to acetone and ethanol.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.222-224
• /
• 1993

In this paper, The optimum oxidation conditions for the formation of Cu-Zn ferrite were investigated using precipitates obtained by the mixture of $CuCl_2{\cdot}2H_2O$, $ ZnCl_2$, $FeCl_3{\cdot}6H_2O$ and NaOH. The precipitates were prepared by coprecipitation method on various temperatures and oxidation conditions. The oxidation products were examined by SEM, XRD, and VSM. The particles obtained at 70($^{\circ}C$) were more spherical and fine than that of prepared at 25($^{\circ}C$), 50($^{\circ}C$), 60($^{\circ}C$), respectively. By $H_2O_2$ oxidation, the saturation magnetization of the powders was little influenced, But, by air oxidation the saturation magnetization of the powders was influenced intricately. According to our experimental data, the saturation magnetization of the powders increased with reaction time and was saturated at 9 hours.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.37-43
• /
• 2004

The performance of magnetic abrasive finishing fur surface is evaluated by the characteristic curve. The characteristic curve is generated by experiment in surface finishing. For experiment, new magnetic inductor is designed and manufactured. 15 kinds of powders are provided to find the relationship between powder characteristic and finishing performance. As powder, Fe-TiC. Polymer-TiC and Fe-NbC are used with different size. The size of abrasives and location are also important factor for the performance. From characteristic curve, two index are obtained, which specify the initial finishing performance and endurance of finishing performance. It is proved that the performance index can be applied to select proper powder for efficient deburring. It is shown that the characteristic curve can be used as good tools for evaluating powder performance in surface finishing and deburring.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.68-71
• /
• 2000

In this study, A set-up for measuring a initial permeability of soft-ferrite powder was developed with a differential transformer coil. To measure a initial permeability of magnetic powder is cumbersome since there are not any measuring equipment and method. A magnetic powder is currently used for a magnetic fluid and microwave absorber materials, and the initial permeability of the magnetic powders is very important to be evaluated a powder for some applications.

• Transactions on Electrical and Electronic Materials
• /
• 제5권1호
• /
• pp.29-33
• /
• 2004

The materials showing high structure dispersity have been developed on the quartz base by mechano-chemical technology. Depending on the processing conditions and subsequent applications, the materials produced by mechano-chemical reaction (MCR) showed concurrently magnetic, dielectric and electrical properties. The obtained magnetic-electrical powders classified by aggregate complex of their features as segneto-magnetics, contained a dielectric material as a carrying nucleus, particularly the quartz on that surface one or more layers of different compounds was synthesized having thickness up to 10∼50 nm and showing magnetic properties and etc.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권3호
• /
• pp.28-33
• /
• 2023

Magnetic relaxation properties of pure MgB₂ powder samples and diluted water-treated MgB₂ powder samples were investigated. The magnetic field H-dependence, m(H), and the time t-dependence, m(t), of the magnetic moment m were measured and analyzed using the PPMS-VSM magnetometer equipment, respectively. The m(t) reduction rates of pure MgB₂ powder samples and diluted water-treated MgB₂ powder samples decreased to about 0.7 ~ 1.8% and 0.6 ~ 1.0% for about 7200 s, respectively, at temperature T = 15 K. The magnetic relaxation properties of the two types of MgB₂ powders were analyzed by calculating the magnetic relaxation rate S = -dln(M_irr)/dln(t) values according to Anderson-Kim theory. The magnetic relaxation ratio S values of the two types of MgB₂ powder samples were almost similar. As a result of the quantum creep effect, the constant magnetic relaxation rate S characteristic was confirmed at a temperature range of T = 10 K or less.

• 한국분말재료학회지
• /
• 제27권4호
• /
• pp.300-304
• /
• 2020

In this paper, a durability study is presented to enhance the mechanical properties of an Fe-Si-Al powder-based magnetic core, through the addition of graphite. The compressive properties of Fe-Si-Al-graphite powder mixtures are explored using discrete element method (DEM), and a powder compaction experiment is performed under identical conditions to verify the reliability of the DEM analysis. Important parameters for powder compaction of Fe-Si-Al-graphite powder mixtures are identified. The compressibility of the powders is observed to increase as the amount of graphite mixture increases and as the size of the graphite powders decreases. In addition, the compaction properties of the Fe-Si-Al-graphite powder mixtures are further explored by analyzing the transmissibility of stress between the top and bottom punches as well as the distribution of the compressive force. The application of graphite powders is confirmed to result in improved stress transmission and compressive force distribution, by 24% and 51%, respectively.

• 한국자기학회지
• /
• 제22권6호
• /
• pp.216-220
• /
• 2012

이 연구에서는 근역장 통신(NFC)용 소재로 응용하기 위해, MnZn 페라이트와 FeSi 합금 분말을 filler로 사용하여 제조한 0-3형 자성복합소재의 복소투자율 변화(1 MHz~1 GHz)를 측정하였으며, RFID 주파수(13.56 MHz)에서의 복소투자율 값을 검토한 결과, filler 함량에 따라 투자율 실수항은 증가하고 허수항은 감소하는 결과를 얻었다. 즉, 시트형 자성복합소재의 응용을 위한 연구 결과로서, 고투자율을 나타내면서 손실항인 허수항을 상대적으로 낮출 수 있는 소재 제조공정 기술을 확보할 수 있었으며, 복소투자율 변화는 자성분말 filler의 성분과 입자 형태, 그리고 polymer 종류에 의존함을 알 수 있었다.

• 한국결정성장학회지
• /
• 제10권4호
• /
• pp.292-296
• /
• 2000

영구자석용 $Sm_2$$Fe_{17}$$N_{x}$계 분말재료를 합성하기 위하여 유성형 볼밀장치를 사용한 Mechanochemical reaction 반응법을 적용하였다. 볼밀처리시 출발원료로서 금속 Sm과 Fe분말을 사용하고 고상반응을 통한 경질자성상 $Sm_2$$Fe_{17}$$N_{x}$의 형성과정을 조사하였다. 출발원료 $Sm_2$$Fe_{100-x}$(x = 11, 13, 15)의 모든 조성에서 볼밀처리만을 행하였을 경우 Sm-Fe계 비정질상 및 $\alpha$-Fe의 혼합상 분말을 얻을 수 있었다. 또한 볼밀처리된 분말시료의 열처리를 통하여 최종 생성상에 미치는 출발원료의 조성의존성을 조사한 결과, $Sm_{15}Fe_{85}$ 조성에서 거의 단상의 $Sm_2$$Fe_{17}$ 화합물이 생성됨을 알 수 있었다. $Sm_2$$Fe_{17}$으로부터 경질자성상인 $Sm_2$$Fe_{17}$$N_{x}$ 화합물을 생성시키기 위하여 $450^{\circ}C$, $N_2$가스분위기에서 질화열처리를 실시하였다. 분말시료에 흡수된 질소량은 질화 처리 초기에 급격히 증가한 후 서서히 포화되었으며 이에 따라 보자력 및 잔류자화가 크게 증가하는 것을 알 수 있었다. 본 연구에서 얻어진 Sm-Fe-N계 분말재료는 차세대 고성능 영구자석을 제조할 수 있는 원료분말로서 그 응용이 기대된다.

• 한국분말재료학회지
• /
• 제10권2호
• /
• pp.83-88
• /
• 2003

Nanocrystalline materials of Ni and Ni-Cu alloy have been synthesized by the pulsed wire evaporation (PWE) method and these abnormal magnetic properties in the magnetic ordered state have been characterized using both VSM and SQUID in the range of high and low magnetic fields. Ni and Ni-Cu particles with an average size of 20 to 80 nm were found to influence magnetic hysterisis behavior and the results of powder neutron diffraction patterns and saturation magnetization curves are shown to indicate the absence of the NiO phase. The shifted hysterisis loop and irreversibility of the magnetization curve in the high field region were observed in the magnetic-ordered state of both Ni and Ni-Cu. The virgin magnetization curve for Ni slightly spillover on the limited hysterisis loop ($\pm$20kOe). This irreversibility in the high field of 50 kOe can be explained by non-col-linear behavior and the existence of the metastable states of the magnetization at the surface layer (or core) of the particle in the applied magnetic field. Immiscible alloy of Cu-Ni was also found to show irreversibility having two different magnetic phases.