• 전기의세계
• /
• v.15 no.5
• /
• pp.32-39
• /
• 1966

This voltage Regulator, which regulates voltage in different way from the conventional regulator, is constructed by circular-plate core type stators and controllers (are similar to rotor of conventional). The principle of this Voltage Regulator is based on the rotating magnetic field theory including peculiar homopolar and heteropolar concept. Comparing with the conventional induction regulator, this regulator need not to have short windings and can cancel armature reaction. Moreover, it is able to decrease the machine noise and control the phase of it freely. And it's efficiency can become more than 95% which almost the same as that of transformer's. By increasing numbers of cores of the same size, the output power can be increased, the insulation can be decreased and high Voltage can directly be connected because applied voltage is distributed to each core. This Voltage Regulator can be also used as a current regulator, a starter a induction motor and a phase transformer etc.

• 전기의세계
• /
• v.27 no.5
• /
• pp.69-75
• /
• 1978

3 phase induction motor applied in the method of connecting it directly across the line needs large current when it starts. At that time, leakage magnetic pathes of interior of the motor are severely saturated and leakage reactances are decreased because of saturation. Consequently, increased current and raised powerfactor yield increase of starting torque. The author, noticing those phenomena, derived experimentally the raion of decreasing leakage reactance from the fact that when voltage applied to motor is increased under locked condition the magnitude of current and phase angle are varied, and determined tha equations of starting current and starting torque, considering the decrease of leakage reactance by the large starting current. The author calculated the characteristics of Current-Time and Speed-Time with the determined equation at specific load conditions, and compared the values obtained from above calculations with those from circle diagram's method and the practically recorded values at same load conditions. Therefore, the authos got a confidience that the results of the derived theory coincide with the practically measured values more well than circle diagram's results and circle diagram's equation should be modified in order to analize the starting status of a induction motor.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.3
• /
• pp.173-181
• /
• 1989

A split-phase induction motor with asymmetrical magnetizing reactance axes develops starting torque and its efficiency can be high under certain conditions. In this paper, one method of producing the asymmetry of magnetizing reactance axes is described. The grain-oriented silicon steel core is used to produce the asymmetric axes instead of non-oriented silicon steel core which is used in general motors. The optimum design method for the motor is suggested and analyzed. To verify this suggestion, the permanent capacitor run type induction motors are designed to be driven at balanced condition by its asymmetrical effect, and then the oscillating torque due to the asymmetry of motor structures are analyzed. Tests of the sample motor have shown good performance comparable to ordinary types. This motor structure can be used where high effciency and reliability are required, and also the amount of core materials can be reduced due to its high permeability.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.870-872
• /
• 2003

This paper deals with the characteristic analysis of capacitor-run single phase induction motor by equivalent circuit. The unbalanced elliptic rotating magnetic field of the motor was analysed by the symmetrical coordinate method. And this paper check the reliability of characteristic analysis by equivalent circuit in comparison with experimental results and analyse the characteristics of single phase induction motors by changing circuit parameters. Finally, this paper shows the improved effiency design motor by using that result.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.287-289
• /
• 2000

Induction heating is utilized in a large and ever-increasing number of application. The most prominent of these are billet heating heat treating, metals joining, and metal melting. In these day, heating roll, a kind of induction heating, is widely used in curing of coatings and fiber industry. In this paper, at first, treated that heating roll's characteristics equation. The second, analysis of magnetic flux and eddy currents distribution using FEM.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.579-588
• /
• 1999

This paper presents a technique for predicting the conductLu EMI(Electro Magnetic Interference) produced b by PWM inverter-induction motor drive system. To obtain the simulation models for prediction of conduct떠 n noise, high frequency model of an inverter leg with parasitic elements and multi-coil model of stator winding M are designed. Finally, the results are confirmLu from simulation and experiments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1733-1740
• /
• 2004

In the transverse flux linear induction motor(TFLIM) with the general secondary composed of conductor and back-yoke, there exists a magnetized force into the normal direction or the air-gap direction of the thrust motion as well as the thrust force. Therefore, the various methodologies have been tried to use the normal force by the two independent control variables of the multi-phase input. But, as the force depends inevitably and strongly on the thrust force, it is essential to decouple both forces for two control index. In this paper, we suggest a novel approach capable of compensating the couple between both forces and the control index by using the DC-biased multi-phase input, and then realizing the independent control of TFLIM.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.81-86
• /
• 2005

Proposed induction-heated system is innovative system which applied special high-frequency power circuit technique for thermal converse technique and IH(Induction-Heating) magnetic induction heating generated from induction-heated metallic package that is for distillation unit. In this occurs not burning, so that the working environment can be improved. This electromagnetic induction heating technique is used high frequency inverter. By using high frequency inverter high frequency alternative current (HFAC) in the range of [kHz] can be made with conventional alternative current In this contribution IGBT module is used for high frequency inverter. In this paper are discussed action analysis and characteristics analysis of 1.5[kW]-Class half-bridge resonant inverter system and resonant metallic packaged. In addition, by using this system,t how two step heating superheated steam generator is developed and application of system are also discussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.5
• /
• pp.481-487
• /
• 2005

Proposed induction-heated system is innovative system which applied special high-frequency power circuit technique for thermal converse technique and IH(Induction-Heating) magnetic induction heating generated from induction-heated metallic package that is for distillation unit. In this occurs not burning, so that the working environment can be improved. This electromagnetic induction heating technique is used high frequency inverter, By using high frequency inverter high frequency alternative current in the range of [kHz] can be made with conventional alternative current. In this contribution IGBT module is used for high frequency inverter. This paper proposes new fluid heating method. Which is operated as follows. Working coil, which is wrapped outside of pipeline, makes the eddy current. Inside of heating vessel in isolated pipeline the specially designed stainless metallic package is inserted, which can be heated by eddy current losses. And then In this paper are discussed action analysis and characteristics analysis of 5[kW] class full-bridge resonant inverter system and resonant metallic package. In addition, by using this system, how high-efficiency heater is developed and application of system are also discussed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.95-103
• /
• 2008

Proposed induction-heated system is innovative system which applied special high-frequency power circuit technique for thermal converse technique and IH(Induction-Heating) magnetic induction heating generated from induction-heated metallic package that is for distillation unit. In this occurs not burning, so that the working environment can be improved. This electromagnetic induction heating technique is used high frequency inverter. By using high frequency inverter high frequency alternative current (HFAC) in the range of [kHz] can be made with conventional alternative current. In this contribution IGBT module is used for high frequency inverter. In this paper are discussed action analysis and characteristics analysis of 1.5[kW]-Class half-bridge resonant inverter system and resonant metallic package. In addition, by using this system, how two step heating superheated steam generator is developed and application of system are also discussed.