• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.2
• /
• pp.167-172
• /
• 2015

In order to prevent crack in thick weld zones, the preheating process such as induction and gas torch heating needs to be applied. Among them induction heating is the most effective heat source because it has rare thermal effect and very rapid heating characteristics. In this paper, when the induction heating method is used to improve arc welding, the temperature distribution and magnetic field density of the welding zones are analyzed by simultaneously solving heat transfer and electromagnetic field equation. In particular, cone and flat type coils are designed and induction heating effects of each type are compared to identify heating characteristics on a V-groove weld joint. As a result, a cone shape coil is more efficient in the preheating process. When induction heating and arc welding system is designed for thick plate with V-groove weld joint, the results in this paper could be applied.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.3
• /
• pp.593-598
• /
• 2017

Induction generator is always required reactive power in order to generate a rotating magnetic field as an inductive load. The reactive power must be continuously supplied to the induction generator as well as load of distribution system from the power supply side. So the power factor of the power supply side during the induction generation operation is low. Condenser is installed in order to raise the low power factor of the induction generator. Switching transients occurs when the power supply of the capacitor is turned on in order to ensure the low power factor. When using the reactor in series with the capacitor in order to reduce the influence of switching transient, it can affect the reactive power by the condenser voltage rises. In this study, we analyzed the operating characteristics for power and power factor of induction generator in accordance with the presence or absence of the application of the serial reactors for switching transients reduction of the condenser and the condenser for power factor correction.

• Journal of Korea Foundry Society
• /
• v.19 no.5
• /
• pp.393-402
• /
• 1999

The reheating of the billet in the semi-solid state as quickly and homogeneously as possible is one of the most important aspects. From this point of view, an optimal design of the induction coil is necessary. The objective of inductive coil designsi a uniform induction heating over the length of the billet. The effect of coil length, diameter, the gap between coil surface and billet and axial position of the billet on temperature distribution of billet has been investigated. These design parameters have an important effectiveness on the electro-magnetic field. Therefore, in this study an optimal coil design to minimize electromagnetic ed effect will be proposed by defining the relationship between billet length and coil length. In particular, key point in induction heating process is focussed on optimizing the coil design with regard to the size of the heating billet and the frequency of induction heating system. After demonstrating the suitability of an optimal coil design through the FEM simulation of the induction heating process, the results of the coil design are also applied to the reheating process to obtain a fine globular microstructure. Its considered that the reheating conditions of aluminum alloys for thixoforging and a new CAE model of the induction heating process are very useful for thixoforging practitioners including induction heating ones.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.56-61
• /
• 2005

The induction heating is widely used not only in the industrial fields but also in the home appliances. But the conventional induction heating systems have shortcoming that it use only magnetic utensil, in this paper, heating of Aluminum sheet by full-bridge series resonant high-frequency inverter is proposed. Also, the principle of induction heating and operations of full-bridge inverter equivalent circuit are explained. The proposed inverter controls the output voltage using phase-shift irrespective of the switching frequency using phase-shift. As a result the proposed induction heating system by full-bridge resonant inverter shows the possibility that make up for the shortcoming of the conventional existing induction heating systems.

• Korean Journal of Materials Research
• /
• v.14 no.9
• /
• pp.655-658
• /
• 2004

Lithium ferrites are a low-cost material which have been prominent in the high frequency core industry because of their excellent temperature performance and high squareness ratio. In order to develope the lithium ferrites with the high squareness and low coercive force, the ferrites of $Li_{0.48}Bi_{0.02}Ni_{0.04}Fe_{2.46-x}O_4$ were investigated the by varying composition, temperature and frequency. Electric loss of the Li-ferrite was lowered with the substitution of $Mn_{2}O_3$. The addition of $Mn_{2}O_3$ increased the magnetic induction (Bm&Br) but decreased the coercive force (Hc) and the squareness ratio (R=Br/Bm). Also, the Br value was stable at environmental temperature variation.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.2
• /
• pp.249-254
• /
• 2009

This article deals with the analysis of a coupling between stationary Maxwell's equations, the transient state Navier-Stokes and thermal equations. The resolution of these equations is obtained by introducing the magnetic vector potential A, the vorticity ${\xi}$, the stream function ${\psi}$ and the temperature T. The flux density, the electromagnetic thrust, the electric power density, the velocity, the pressure and the temperature are graphically visualized. Also, the influence of the frequency is presented.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.638-640
• /
• 2001

In this paper, system equation of the magnetic equivalent circuit of the induction motor be consist of the magnetomotive force transformation matrix and the flux transformation matrix. The system equation is fed by three phase sinusoidal current and get to magnetomotive force on the teeth. This study confirmed the time and spatial distribution of the magnetomotive force on the teeth created by the winding.

• Journal of Magnetics
• /
• v.3 no.4
• /
• pp.120-122
• /
• 1998

The higher order harmonic components of magnetostriction during ac magnetization in 3% SiFe are measured as a function of the magnetizing angle respect to [001] axis using a constructed laser interferometry. The magnetostriction with magnetizing angle from [001] axis agrees ith the calculation based on domain reorientation. The relative amplitudes of odd and even harmonics respectively for magnetic induction and magnetostriction decrease with the order of harmonics, accompanying the contraction of the amplitudes. The contraction of harmonics order of magnetostriction harmonics is shown to be the even number times of that of magnetic induction.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.1
• /
• pp.29-35
• /
• 1990

This paper proposes a tow-dimensional magnetic flux distribution analysis of the double-sided linear induction motor(DLIM). Both the longitudinal end-effect and the transverse edge-effect, which are due to the finite length and width of the primary stator, are considered. Also each force which is due to the variation of slip frequency was computed to show the fact that the thrust force of DLIM is dependent on both the longitudinal end-effect and the transverse edge-effect. To ascertain the propriety of this analysis, the simulated results of the magnetic flux density distribution in the airgap are compared to the experimental data.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.945-947
• /
• 2003

Various kinds of practical machines using single phase induction motor(SPIM) are necessary to control speed and torque. In particular, capacitor-run type SPIM has constitutional characteristics, the motor torque is changed by auxiliary capacitance variation. In this study, we manifest equivalent model having more simplicity, and study the relation between torque and capacitance value of SPIM. And analyze Magnetic vibration for FEM(Finite Element Method) simulation. Also, We design the experimental controller which is able to speed control accurately by phase angle control of AC input voltage. Through the simulation and experimental results, we confirmed validity of this study.