• 한국자기학회지
• /
• 제23권1호
• /
• pp.18-25
• /
• 2013

배관용 비파괴 검사에서 자기누설방식을 이용하여 배관의 결함을 검출하도록 개발된 탐상 시스템 장비를 MFL PIG(Magnetic Flux Leakage Pipeline Inspection Gauge)라 한다. 이 장비는 투자율이 큰 금속 배관의 길이 방향인 축방향으로 자기장을 형성하고, 결함이 있는 부분에 발생하는 누설 자속 신호를 홀센서를 이용하여 검출한다. 하지만 MFL PIG는 배관에 축방향으로 발생한 미소결함에 대해서는 누설 자속의 발생량이 미세하여 결함 유무를 판별하기 어렵다. 본 논문에서는 배관에 발생한 축방향 미소결함을 검출하기위해 CMFL(Circumferential MFL) PIG를 적용하였고, 결함 주위에 발생한 누설 자속 신호의 크기 및 분포를 3차원 정자계 유한요소법을 이용하여 검출 및 분석하였다. 이러한 검출 신호로부터 길이, 폭, 깊이와 같은 결함의 형상을 판정하는 기법을 제안하였고 이를 CMFL PIG 모의 성능 실험을 통하여 비교 및 검증하였다.

• Advances in Computational Design
• /
• 제7권1호
• /
• pp.57-68
• /
• 2022

A simulation study of the distribution of magnetic flux induced by a U-shaped electromagnet into a two-layer massive object with variations in the depth and properties of the surface layer has been carried out. It has been established that the hardened surface layer "pushes" the magnetic flux into the bulk of the magnetized object and the magnetic flux penetration depth monotonically increases with increasing thickness of the hardened layer. A change in the thickness and magnetic properties of the surface layer leads to a redistribution of magnetic fluxes passing between the poles of the electromagnet along with the layer and the bulk of the steel object. In this case, the change in the layer thickness significantly affects the magnitude of the tangential component of the field on the surface of the object in the interpolar space, and the change in the properties of the layer affects the magnitude of the magnetic flux in the magnetic "transducer-object" circuit. This difference in magnetic parameters can be used for selective testing of the surface hardening quality. It has been shown that the hardened layer pushes the magnetic flux into the depth of the magnetized object. The nominal depth of penetration of the flow monotonically increases with an increase in the thickness of the hardened layer.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권1호
• /
• pp.47-51
• /
• 2010

We already obtained magnetic behavior of superconducting Nb foil of linear type magnetic flux pump (LTMFP) by means of the FEM analysis. As well as, fundamental equations of pumping current were theoretically derived based on the pumping sequences according to the position of normal spot of the moving flux. In this paper, we experimentally investigated pumping performances of LTMFP with a wide range of traveling speed of magnetic field. In order to confirm the numerical and theoretical approaches, we explained the pumping characteristics of LTMFP by use of the calculation sequence of pumping current.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.794_795
• /
• 2009

This paper presents an analysis method for a permanent magnet excited Transverse Flux Linear Motor (TFLM) with spiral core in a mover. The spiral core is used as mover core in order to make 3-dimensional magnetic flux path at the TFLM which has 3-dimensional magnetic flux flow. Magnetic field is analyzed by three-dimensional Equivalent Magnetic Circuit Network (EMCN) method. And an imaginary part, 'flux barrier,' is introduced to consider the spiral core characteristic. The computed thrust forces is compared to the measured results to show the effect of presented analysis method.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1222-1229
• /
• 2017

In this paper, a wireless power transfer system with semi-random magnetic flux is studied. Directions of semi-random magnetic flux are changing almost randomly which can induce voltages at coils irrelevantly to coil's posture. So, very convenient charging is possible. Semi-random magnetic flux can be generated by a coil system which has three coils perpendicular to each other and carrying currents with different frequencies. A prototype for charging mobile devices is constructed and tested, and the proposal is verified.

• 조명전기설비학회논문지
• /
• 제27권4호
• /
• pp.41-47
• /
• 2013

The electrical relay in an essential part of the Smart Grid, Electrical Vehicle (EV) and LED lightning system. For these reasons, research of electrical relay is actively underway. In this paper, analyze of the relationship between the bouncing of relay contact and magnetic flux of permanent magnet. Experiment result, changes the bouncing numbers depending on the magnetic flux of the latching relay. And find the value of the magnetic flux that occurs to minimize the bouncing of the contacts. In additions, by the increasing the magnetic flux, unconditional bounce is not reduced. The bouncing number of latching relay is less than expected the armature relay for present results. Further experiments are need to prove it, bouncing on the armature relays.

• 한국소음진동공학회논문집
• /
• 제26권7호
• /
• pp.875-880
• /
• 2016

A new hybrid permanent magnet biased magnetic levitation actuator (maglev) is developed. This new maglev actuator is composed of two C-core electromagnetic cores separated with two permanent magnets. Compared to the conventional hybrid maglev actuators, the new actuator has unique flux paths such that bias flux paths are separated with control flux paths. The control flux paths have minimum reluctances only developed by air gaps, so the currents to produce control fluxes can be minimized. The gravity load can be compensated with the permanent magnet bias fluxes developed at off-centered air gap positions while external disturbances are controlled with control fluxes by currents. The consumed power to operate this levitation system can be minimized. 1-D magnetic circuit model is developed for this model such that the flux densities and magnetic forces are extensively analyzed. 3-D finite element model is also developed to analyze the performances of the maglev actuator.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.360-365
• /
• 2015

Spatial distributions of magnetic flux density in a newly designed magnetized inductively coupled plasma (M-ICP) etcher were investigated. Radial and axial magnetic flux densities as well as the magnetic flux density on the center of the substrate holder were controllable by placing multiple circular coils around the etcher properly. The plasma density non-uniformity in M-ICP (25 Gauss) can be reduced (1.4%) compared to that in ICP (16.7%) when the neutral gas pressure was 0.67 Pa and a right-hand circularly polarized wave (R-wave) can be propagated in to the etcher by making magnetic flux density increases both radially and axially from the center of the substrate holder.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.236-243
• /
• 2008

This paper analyses magnetic flux saturation of matching transformer considering characteristic of dynamic voltage restorer(DVR) system to solve voltage sags which are considered the dominant disturbances affecting power quality. This DVR consist of PWM inverter to inject arbitrary voltage, LC low pass filter and matching transformer for isolation and grid connection. However, the matching transformer has an excess of inrush current by magnetic flux saturation in the core of transformer. Due to this inrush current, the rating of matching transformers is double for needed nominal rating for protection of DVR. Therefore, in this paper, an advanced modeling method of magnetic flux saturation is used to analyze a magnitude and characteristic of magnetizing current. Simulation and experimental results considering characteristic of DVR system are provided to demonstrate the validity of the proposed analysis method.

• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.99-105
• /
• 2011

The magnetic circuit analysis excluding flux loss and fringing effect often gives a result with unignorable error, when compared with real system. But, it is not easy to make a complete magnetic circuit model with the loss effects. This paper introduces a relatively simple method to build the model including the flux loss and fringing effect, in which the paths of leaked flux are simplified in terms of circular arcs and straight lines. After modification of the model, the error of about 36 % in maximum between the magnetic circuit analysis and FEM analysis is reduced to about 7 %.