• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.291.1-291.1
• /
• 2013

We examined the temperature-dependent structural and magnetic properties of HgI2 in the temperature range of 300~400 K. HgI2 is a diamagnetic material and can be used for X-ray or γ-ray detectors. DCmagnetization measurements on HgI2 showed that there is a small but distinguishable change in its diamagnetic properties near 375 K. The magnetic property change is not expected because Hg and I are known as nonmagnetic elements. X-ray diffraction (XRD) measurements revealed a structural transition in the temperature of 350~400 K. Temperature-dependent x-ray absorption fine structure (XAFS) demonstrated that the chemical valence states of both Hg and I did not changed in the temperature range of 300~400 K. However, XAFS revealed that the bond-length disorder was slightly increased in the temperature range, particularly, near Hg atoms. The structural changes of HgI2 are likely related to its diamagnetic property change. We will discuss the relation between the diamagnetic properties and local structural properties of HgI2 in detail.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1144-1149
• /
• 2001

In this paper, a sliding mode controller of a fluid engine mount using MR (Magneto-Rheological) fluid was discussed When the MR fluid is applied to a fluid mount, resistance of MR fluid can be controlled by electro-magnetic valve installed in the inertia track. Since the rheological property of the MR fluid shows a function of shear rate, the damping characteristics of the mount will be change according to the frequency. Changing an applied magnetic field to the valve changes the property of the mount, such as the resistance of the MR fluid, the notch and the resonant frequencies due to the fluid passing, quantity of the fluid passing, the effective piston area of the volumetric damping and stiffness. Therefore, the fluid mount using MR fluid can be regarded as a variable structure system The sliding mode control known well as a particular type of variable structure control was introduced in this study. The sliding mode control, which has inherent robustness, is also expected to improve the control performance in the engine mount The sliding mode controller for the mount formatted by taking into account the response property with a time constant to MR fluid and the variable mount property. The motion equations of the fluid mount are derived from Newton's law of motion and used in numerical simulation. Numerical simulations illustrate the effectiveness of the sliding mode controller.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1239-1240
• /
• 2006

Effects of $Ag_2O$ doping on the electromagnetic properties in the BiSrCaCuO superconductors. The electromagnetic properties of $Ag_2O$ doped and undoped BiSrCaCuO superconductor were evaluated to investigate the contribution of the pinning centers to the magnetic effect. It was confirmed experimentally that a large amount of magnetic flux was trapped in the $Ag_2O$ doped sample than that in the undoped one, indicating that the pinning centers of magnetic flux are related closely to the occurrence of the magnetic effect. It is considered that the area where normal conduction takes place increases by adding $Ag_2O$ and the magnetic flux penetrating through the sample increases. The results suggested that Ag acts to increase pinning centers of magnetic flux, contributing to the occurrence of the electromagnetic properties.

• Journal of the Korean Ceramic Society
• /
• v.44 no.5 s.300
• /
• pp.166-172
• /
• 2007

In this study, magnetic properties of the strontium ferrite were theoretically investigated by Ab initio (first principle) method. The influences of various additives on the magnetic properties of the strontium ferrite were analyzed to designed new composition of the strontium ferrite system with high magnetic characteristics. As shown in the results, the total magnetization of the strontium ferrite was $42.55M_B$. Based on the DOS results, the magnetic characteristics of the strontium ferrite were mainly influenced by Fe atoms at 6 positions in the unit cell. Also the La-Mn strontium ferrite has the superior magnetic property than the Mn strontium ferrite.

• Journal of the Korean Magnetics Society
• /
• v.19 no.4
• /
• pp.142-146
• /
• 2009

The soft magnetic property for the Corning glass/Ta(5 nm)/[Conetic, Permalloy)/Ta(3 nm) prepared by the ion beam deposition sputtering was investigated. The coercivity and saturation magnetic field of conetic (NiFeCuMo) and permalloy (NiFe) layer with easy and hard direction along to the applying magnetic field during deposition was compared with each other. The surface resistance of conetic film with a thickness of 10 nm was 2 times lower than one of permalloy film. The coercivity and the magnetic susceptibility of conetic film decreased and increased 3 times to one of permalloy film, respectively. These results suggest that a highly sensitive GMR-SV or MTJ using conetic film can be possible to develop the bio-device.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1998.10b
• /
• pp.40-40
• /
• 1998

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.32-33
• /
• 2003

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.180-181
• /
• 2003

• Bulletin of the Korean Chemical Society
• /
• v.16 no.2
• /
• pp.105-110
• /
• 1995

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.168.1-168.1
• /
• 2008