• Progress in Superconductivity and Cryogenics
• /
• v.5 no.3
• /
• pp.6-10
• /
• 2003

Silver nano-powder was added to Ma $B_2$ to make (Ag)$_{(x)wt.%}$(Mg $B_2$)$_{(l00-x)wt.%}$ (A $g_{x}$-Mg $B_2$) (10 $\leq$ x $\leq$ 50) composite superconductors to investigate the effect of the Ag nano-powder on the vortex pinning. Pellets made out of the mixed powder were put inside stainless steel tubes, which were sintered at 85$0^{\circ}C$ in Ar atmosphere. No impurity phase was identified for as-rolled samples. However, both the Mg $B_2$ and the A $g_{x}$-Mg $B_2$ composite pellets, when sintered, contain small amount of Mg $B_4$ and MgAg impurity phases. From the magnetization study, it was found that the flux pinning was improved in the high magnetic field region (> 3 T) only when 10w/o Ag was added to Mg $B_2$. The "two step" structures in ZFC M(T) curve gradually increased as the amount of Ag added increased. Pinning centers can be created by adding a suitable amount of Ag nano-powder which is not too large to increase the decoupling between the Mg $B_2$ grains.crease the decoupling between the Mg $B_2$ grains.

• Applied Microscopy
• /
• v.30 no.3
• /
• pp.249-254
• /
• 2000

We investigated the microstructure, electrical property, and magnetic property of Co/Al multilayer after annealing treatment. CoAl was formed during depositing Co/Al multilayer due to the interfacial reaction. After annealing treatment, $Co_2Si$ was formed at the Co/Si interface. The sheet resistance of Co 2 nm/Al 2 nm multilayer have the lowest value and the Rs of multilayer decreased with the increase of annealing temperature due to the formation of $Co_2Si$ phase. The Ms of 2 nm Co/2 nm Al multilayer have the lowest value and the Ms of multilayer increased with the increase of film thickness.

• Journal of the Korean Ceramic Society
• /
• v.48 no.4
• /
• pp.307-311
• /
• 2011

Solid solutions of the (1-x)$BiFeO_3-xSrTiO_3$ ceramic system (x = 0~0.4) are explored here in attempts to obtain multiferroic properties in these systems. The polarization-electric field hysteresis, magnetization-magnetic field curves, and dielectric properties are also characterized. This solid-solution system shows a crystal structural transition from a noncentrosymmetric (R3c) structure to a centrosymmetric (Pm-3m) structure at 0.3 < x < 0.4. The solid solution ceramic shows unsaturated M-H behavior and low remanent magnetization over the composition region of 0.1 ${\leq}$ x ${\leq}$ 0.3. The $0.7BiFeO_3-0.3SrTiO_3$ system shows the largest value of $M_s$ at 0.17 emu/g and the smallest value of $H_c$ at 1.06 kOe. The P-E hysteresis curves were not saturated under an electric field as high as E = 70 kV/cm. This system is considered to have multiferroic characteristics in the composition range of 0.1 ${\leq}$ x ${\leq}$ 0.3.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.2
• /
• pp.121-129
• /
• 2014

Objectives : Patients with cervical ossification of posterior longitudinal ligament (OPLL) are susceptible to cord injury, which often develops into myelopathic symptoms. However, little is known regarding the prognostic factors that are involved in minor trauma. We evaluated the relationship between minor trauma and neurological outcome of OPLL and investigated the prognostic factors with a focus on compressive factors and intramedullary signal intensity (SI). Methods : A total of 74 patients with cervical myelopathy caused by OPLL at more than three-levels were treated with posterior decompression surgeries. We surveyed the space available for spinal cord (SAC), the severity of SI change on T2-weighted image, and diabetes mellitus (DM). The neurological outcome using Japanese Orthopedic Association (JOA) scale was assessed at admission and at 12-month follow-up. Results : Among the variables tested, preoperative JOA score, severity of intramedullary SI, SAC, and DM were significantly related to neurological outcome. The mean preoperative JOA were $11.3{\pm}1.9$ for the 41 patients who did not have histories of trauma and $8.0{\pm}3.1$ for the 33 patients who had suffered minor traumas (p<0.05). However, there were no significant differences in the recovery ratios between those two groups. Conclusions : Initial neurological status and high intramedullary SI in the preoperative phase were related to poorer postoperative outcomes. Moreover, the patients with no histories of DM and larger SACs exhibited better improvement than did the patients with DM and smaller SACs. Although the initial JOA scores were worse for the minor trauma patients than did those who had no trauma prior to surgery, minor trauma exerted no direct effects on the surgical outcomes.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.3
• /
• pp.347-353
• /
• 1998

An antibiotic for methicillin resistant Staphylococcus aureus(MRSA) produced by Streptomyces lydicus YSK-681 was extracted by chloroform, and then purified by the C18 reversed-phase HPLC and silica gel column HPLC. The molecular weight of the purified antibiotic was determined from the FAB analysis MS an m/z 1022.4 and 1036.4(M+H)+, indicating that the isolated antibiotic consisted of two similar compounds with the molecular weight difference of 14 m/z value. With the aid of the various nuclear magnetic resonance(NMR) spectroscopic techniques such as 1H NMR, 13C NMR, DEPT and HMQC spectroscopy, the characteristics of function al groups were deduced as the hydroxyl group and leucine. The MIC values of the purified antibiotic were observed at 1∼32 $\mu\textrm{g}$/$m\ell$ against Gram-positive bacteria compared to > 125 $\mu\textrm{g}$/$m\ell$ against Gram-negative bacteria or fungi. The antibiotic was active at 8 $\mu\textrm{g}$/$m\ell$ of MIC90 and S180 at the concentration of 500 $\mu\textrm{g}$/$m\ell$.

• Advances in nano research
• /
• v.5 no.3
• /
• pp.215-230
• /
• 2017

The development of hybrid systems comprising nanoparticles and polymers is an opening pathway for engineering nanocomposites exhibiting outstanding mechanical, optical, electrical, and magnetic properties. Among inorganic counterpart, iron oxide nanoparticles (IONP) exhibit high magnetization, controllable surface chemistry, spintronic properties, and biological compatibility. These characteristics enable them as a platform for biomedical applications and building blocks for bottom-up approaches, such as the layer-by-layer (LbL). In this regard, the present study is addressed to investigate IONP synthesised through co-precipitation route (average diameter around 7 nm), with either positive or negative surface charges, LbL assembled with sodium sulfonated polystyrene (PSS) or polyaniline (PANI). The surface and internal morphologies, and electrochemical properties of these nanocomposites were probed with atomic force microscopy, UV-vis and Raman spectroscopy, scanning electron microscopy, cross-sectional transmission electron microscopy, and electrochemical measurements. The nanocomposites display a globular morphology with IONP densely packed while surface dressed by polyelectrolytes. The investigation of the effect of thermal annealing (300 up to $600^{\circ}C$) on the oxidation process of IONP assembled with PSS was performed using Raman spectroscopy. Our findings showed that PSS protects IONP from oxidation/phase transformation to hematite up to $400^{\circ}C$. The electrochemical performance of nanocomposite comprising IONP and PANI were investigated in $0.5mol{\times}L^{-1}$ $Na_2SO_4$ electrolyte solution by cyclic voltammetry and chronopotentiometry. Our findings indicate this structure as promising candidate for potential application as electrodes for supercapacitors.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.2
• /
• pp.131-136
• /
• 2015

Objective : To investigate the incidence of corpus callosum injury (CCI) in patients with mild traumatic brain injury (TBI) using brain MRI. We also performed a review of the clinical characteristics associated with this injury. Methods : A total of 356 patients in the study were diagnosed with TBI, with 94 patients classified as having mild TBI. We included patients with mild TBI for further evaluation if they had normal findings via brain computed tomography (CT) scans and also underwent brain MRI in the acute phase following trauma. As assessed by brain MRI, CCI was defined as a high-signal lesion in T2 sagittal images and a corresponding low-signal lesion as determined by axial gradient echo (GRE) imaging. Based on these criteria, we divided patients into two groups for further analysis : Group I (TBI patients with CCI) and Group II (TBI patients without CCI). Results : A total of 56 patients were enrolled in this study (including 16 patients in Group I and 40 patients in Group II). Analysis of clinical symptoms revealed a significant difference in headache severity between groups. Over 50% of patients in Group I experienced prolonged neurological symptoms including dizziness and gait disturbance and were more common in Group I than Group II (dizziness : 37 and 12% in Groups I and II, respectively; gait disturbance : 12 and 0% in Groups I and II, respectively). Conclusion : The incidence of CCI in patients with mild TBI was approximately 29%. We suggest that brain MRI is a useful method to reveal the cause of persistent symptoms and predict clinical prognosis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.351-358
• /
• 2003

This paper describes distribution characteristics of switching surge voltage in stator windings of induction motor driven by IGBT PWM inverter. To analyze the voltage distribution between the turns and coils of stator winding, equivalent circuit model of induction motor including cable was proposed and high frequency parameter is computed by using finite-element method (FEM). From the electro-magnetic transient program (EMTP) simulation of the whole system for induction motor, feeder cable, and PWM inverter, the variable effect on rising time of the inverter, cable length, and switching frequency on the voltage distribution is also presented. In order to experiment, an induction motor, 380[V], 50[HP], with taps from one phase are built to consider the voltage distribution so that these results can be helpful when filter was designed to remove high dv/dt.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.585-588
• /
• 2002

The USM uses friction between a mobile part (rotor) and a vibration part(stator), which is different from the principle of the conventional motor based on the interaction of electric and magnetic fields. In this thesis, a flat-type $L_1-B_8$ mode USM was designed and fabricated the characteristics of an ultrasonic vibration. The results of fabricated USM are as follows: (1) In case of ultrasonic motor with elastic-body of stainless, when applied voltage, frequency, pressing force of rotor were 50 [V], 27.9 [kHz], 1.5 [N], 5.0[mN m] respectively, the speed of revolution could be presented up to 0 [cm/s]. (2) In case of ultrasonic motor with elastic-body of brass, when applied voltage, frequency, pressing force of rotor were 50 [V], 21.4 [kHz], 1.5 [N], 1.4[mN m]respectively, the speed of rotor revolution was presented up to 0 [cm/s]. (3) The USM of elastic-body of stainless showing 1.17[%], somewhat low, in the maximum efficiency according to torque was superior to the USM of elastic-body of brass showing 0.34 [%]. The Flat-type $L_1-B_8$ mode USM had characteristics of typical drooping torque-speed, large torque and high speed, and operating in both directions by phase reversal.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.168-175
• /
• 2009

This paper proposes an enhanced algorithm for sensorless control of 45,000rpm/22kw type Permanent Magnetic Synchronous Motor (PMSM) with air-foil bearing. The proposed algorithm is based on iterative adaptive flux observer for sensorless control of the motor in wide speed range by on-line estimating angle and velocity of rotor. Simulation error between actual and estimated angle of rotor is analyzed to enhance characteristics of frequency response of conventional adaptive flux observer, which results in stable response in wide range of speed. Using the iteration number for stable phase-delay characteristics, the observer enhances the dynamic characteristics of the observer within current control period. The experiment results show the reliable performance of the proposed algorithm through starting to high speed operating range.