• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.34-38
• /
• 2008

Commercially available magnetic barrel machines equipped with permanent magnets have certain limitations: work can only be finished effectively in limited areas of the container because permanent magnets are arranged two-dimensionally on the magnet disk. We overcame this problem by developing a new magnetic barrel machine equipped with a three-dimensional magnet arrangement. The effectiveness of the new machine has already been reported; this study improved the machine's polishing ability by changing the polarity of magnets on a magnet block. Polishing experiments confirmed the most effective arrangement of magnets on the magnet block. An alternating arrangement of north and south poles produced far superior polishing characteristics than a uniform arrangement of the same pole facing outward. Alternating polarity probably causes increased quantities of barrel media to work together. Finally, we introduced stronger permanent magnets to the magnet block, and found that the increased magnetic field also improved polishing ability.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.288-293
• /
• 2011

Generally, the discontinuous armature permanent magnet linear synchronous motor (PM-LSM) is composed by the stator block (accelerator, re-accelerator, and decelerator) and the free running section. However, the stationary discontinuous armature design involves the velocity variation of the mover during drive when the armature's non-installation part changes over to installation part as a result of the outlet edge of the armature. Therefore, we considered deforming the shape of the outlet edge at the armature and apply skew on the permanent magnet by displacing the two magnet segments of each pole. This paper presents the results of a three-dimensional (3-D) numerical analysis with a finite element method (FEM) of the force exerted by the outlet edge.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권12호
• /
• pp.718-724
• /
• 2004

This study investigates the design factors of Interior Permanent Magnet Synchronous Motor(IPMSM) which is applied to Hybrid electric vehicle as a driving power. Recently, there are many studies of IPMSM for application to Hybrid Electric Vehicle, because IPMSM has characteristics of high torque, high power density and high efficiency which come from reluctance torque due to difference of inductance as well as magnet torque. This study analyzes the inductance and design characteristics of IPMSM by using finite element method and focuses on design and analysis of IPMSM which can operates with high efficiency at low speed range. For this embodiment, magnet shape is changed from conventional block type to arc type without any change of outline dimension of motor and this change of magnet shape makes it possible to increase back EMF and sinusoidal waveform. Analysis results are verified by test of improved and embodied motor. As a test result , increased back EMF and sharply decrease of harmonics are secured and through this contribution of reduced fuel consumption of Hybrid electric vehicle is expected.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권3호
• /
• pp.49-52
• /
• 2013

An experiment to investigate the natural circulation of a cryogen has been performed. The study is motivated mainly by our recent development of cryogenic cooling system for prototype superconducting cyclotron without any circulating pump. In the natural circulation loop system, a cooling channel is attached on the outer surface of the aluminium block and the liquid nitrogen passes through inside of the channel to cool the block indirectly. A cryocooler as a heat sink is located at the top to re-condense cryogenic vapor coming from the aluminium block in which electrical heater is installed as a heat source. The main dimensions are determined using the relevant analysis and the natural circulation loop is successfully fabricated. The temperature distributions in the loop are measured during initial cool-down process and in steady state, from which the modified Grashof numbers are calculated and compared with the existing correlation estimated with one-dimensional analysis for steady state flow.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.145-147
• /
• 2008

In this paper, the implementation of the Permanent Magnet Synchronous Machine (PMSM) model based on the Matlab/Simulink is described. Due to the analysis of the mathematical dq-modeling, a vector controlled PMSM drive simulation is approached. With the simulated system, unlike in black block models, all machine parameters are accessible for control and verification. Based on the Matlab/Simulink, the model of the PMSM with load torque is established, the simulation is studied and some conclusions are given.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.905-910
• /
• 2012

This paper reports an investigation of pulse width modulation (PWM) techniques for twophase brushless DC (BLDC) motors fed by a two-phase eight-switch inverter in a fan application. The three-phase BLDC motor is widely applied in industry; however, a lower-cost two-phase BLDC motor and drive circuit has been greatly in demand in recent years. In this paper, we introduce a mathematical model of the two-phase BLDC motor with sinusoidal back electromotive forces (EMFs) based on traditional three-phase BLDC motors. To simplify the drive algorithm and speed up its application, we analyze the principle of block commutation for a two-phase BLDC motor drive in the 180-electricaldegree conduction mode, and we further propose five PWM schemes to improve the commutation performance of the two-phase BLDC drive. The effectiveness of the proposed PWM methods is verified through experiments.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1176-1187
• /
• 2015

This work proposes a highly efficient sensorless motor driver chip for various permanent-magnet synchronous motors (PMSMs) in a wide power range. The motor driver chip is composed of two important parts. The digital part is a sensorless controller consisting mainly of an angle estimation block and a speed control block. The analog part consists of a gate driver, which is able to sense the phase current of a motor. The sensorless algorithms adapted in this paper include a sliding mode observer (SMO) method that has high robust characteristics regarding parameter variations of PMSMs. Fabricated SMO chips detect back electromotive force signals. Furthermore, motor current-sensing blocks are included with a 10-bit successive approximation analog-to-digital converter and various gain current amplifiers for proper sensorless operations. Through a fabricated SMO chip, we were able to demonstrate rated powers of 32 W, 200 W, and 1,500 W.

• 한국정보처리학회논문지
• /
• 제6권7호
• /
• pp.1929-1940
• /
• 1999

본 논문은 TV 브라운관과 컴퓨터 모니터에 사용되는 마그네트(Magnet)에 일정한 자력을 갖도록 자화 시키는 착자기를 제어하며, 검사공정을 자동화하는 제어 시스템용의 집적회로를 설계하여 개발한 것에 관한 것으로써, 착자기의 콘트롤 모듈과 프로토콜 모듈의 주변기기 제어회로 부분을 0.8um CMOS SOG 기술로 설계하여 ETRI에서 공정하여 칩(Chip)을 완성시켜 동작을 확인하였다. 본 논문에서는 개별 셀(Single cell)의 지연 예측에 사용되었던 기존의 프로파게이션/램프 지연 모델(Propagation/ramp delay model)을 분석, 문제점을 보완 수정한 LODECAP(LOgic DEsign CAPture)의 인버터 선형 지연 모델을 응용하여 타이밍 콘트롤 블록 내의 지연 체인(Delay chain)을 설계 할 수 있는 새로운 "지연 예측 수식"을 제안하였다. 본 논문은 추출된 수식에 의거하여 타이밍 콘트롤 블록의 설계, 시스템에 적용하였으며, 나머지 블록들을 설계한 기법에 대하여도 상술하였다.여도 상술하였다.

• 헤리티지:역사와 과학
• /
• 제54권1호
• /
• pp.206-219
• /
• 2021

기후 온난화는 흰개미에 의한 목조건축문화재 및 가옥 등에 대한 피해를 증가시키고 있다. 현재 흰개미 피해 예방을 위해 건물 주변에 군체 제거 시스템을 설치하여 탐지와 제거를 진행하는 방법이 활용되고 있다. 그러나 1~2개월 단위로 현장을 주기적으로 방문해야 흰개미 유입 여부를 확인할 수 있어 신속한 조치를 취하기 어렵다. 또한 시스템이 장기간 노출된 상태로 설치·운영되기 때문에 결실되거나 훼손되어 기능 손상이 발생하고 있으며 문화재 주변에 설치된 경우 관람 환경을 저해하기도 한다. 본 연구는 목재, 셀룰로오스, 자석, 자력센서를 사용하여 흰개미 유입 여부를 판단하는 탐지 시스템을 제작하여 실험하였다. 그리고 현장을 방문하지 않고 결과를 확인하기 위해 적은 전력으로 작동되는 LoRa Network로 데이터를 전송받았다. 목재는 말목 형태로 제작되었고, 상부에서 하부로 구멍을 내어 유입된 흰개미가 셀룰로오스 시료로 이동이 용이하도록 하였다. 셀룰로오스 시료는 자석을 셀룰로오스로 감싸 원통형으로 만들었으며 목재의 구멍 상부에 삽입하였다. 그리고 목재 말목 상부를 마개로 덮어 이물질 등이 유입되지 않도록 하였으며, 빛·빗물 등 환경적 요인을 차단하여흰개미가 셀룰로오스 시료를 가해할 수 있는 환경을 조성하였다. 셀룰로오스가 흰개미에 의해 가해되면 자석 주위에 공간이 생기고 자석이 낙하하거나 기우는 등의 움직임이 발생하였다. 마개 내에 있는 자력센서는 셀룰로오스 시료 위쪽에 고정하여 자석의 움직임에 따라 자석과 센서 사이의 간격 변화를 측정하였다. 야외 현장 실험은 목재 탐지 시스템에 셀룰로오스 시료를 11개 삽입 후, 5~17일 사이에 현장 방문 없이 자석의 움직임을 통해 흰개미 유입을 확인하였다. 향후 추가적으로 기능을 개선하여 운영한다면 현장 방문 없이 흰개미의 침입 여부를 확인할 수 있고 제품 노출로 인한 훼손과 결실을 줄이며 이에 따라 문화재에 대한 관람 환경이 개선될 것으로 기대된다.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.709-714
• /
• 2009

An ion implanter, which can serve as a metal-ion supply, has been constructed and performance tested. Copper ions are generated and extracted from a Bernas ion source with a heating crucible that provides feed gases to sustain the plasma. Sable arc plasmas can be sustained in the ion source for a crucible temperature in excess of $350^{\circ}C$. Stable extraction of the ions is possible for arc Currents less than 0.3 A. Arc currents increase with the induced power of a block cathode and the transverse field in the ion source. $Cu^+$ ions in the extracted beam are separated using a dipole magnet. A $20{\mu}A$ $Cu^+$ ion current can be extracted with a 0.2 A arc current. The ion current can support a dose of $10^{16}ions/cm^2$ over an area of $15\;cm^2$ within a few hours.