• 상하수도학회지
• /
• 제22권3호
• /
• pp.379-387
• /
• 2008

The pH & alkalinity adjustment method by lime and carbon dioxide($CO_2$) for corrosion control in water distribution system was investigated to evaluate the corrosion characteristics of metal pipes, such as galvanized iron, copper, stainless steel, and carbon steel. When the pH in sand filtered and ozone+GAC treated water was increased with lime and $CO_2$ from 7.5 to 8.0, the concentration of residual chlorine decreased at higher pH and longer reaction time; the concentration of trihalomethane increased. The corrosion rate of coupons with corrosion control using lime and carbon dioxide was showed much smaller than those without corrosion control using pilot-scale simulated distribution system. The galvanized iron was corroded much faster than carbon steel, copper, and stainless steel. Especially, copper and stainless steel coupons were hardly corroded. The galvanized iron and carbon steel coupons with corrosion control were produced the corrosion products less than those without corrosion control by the results of environmental scanning electron microscope(ESEM) and energy dispersive x-ray spectroscopy(EDS) analyses. The galvanized iron coupon with pH and alkalinity adjustment by lime and carbon dioxide was detected about 30 percent of zinc, when the carbon steel was detected about 30 percent of calcium by calcium carbonate products formation. For the results of X-ray diffraction(XRD) analyses, the goethite(${\alpha}$-FeOOH) was identified as primary corrosion product of galvanized iron without corrosion control, while the Zinc oxide(ZnO) was found on corrosion products of galvanized iron coupon with corrosion control as the results of EDS analyses. However, the carbon steel corrosion products regardless of corrosion control were composed predominantly of maghemite(${\gamma}-Fe_2O_3$) and hematite(${\alpha}-Fe_2O_3$).

• Journal of Magnetics
• /
• 제15권4호
• /
• pp.179-184
• /
• 2010

We have investigated the effects of post annealing on iron oxide nanoparticles synthesized by the novel hydrothermal synthesis method with the $FeSO_4{\cdot}7H_2O$. To investigate the post annealing effect, the as-synthesized iron oxide nanoparticles were annealed at different temperatures in a vacuum chamber. The morphological, structural and magnetic properties of the iron oxide nanoparticles were investigated with high resolution X-ray powder diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Mossbauer spectroscopy, and vibrating sample magnetometer analysis. According to the XRD and HRTEM analysis results, as-synthesized iron oxide nanoparticles were only magnetite ($Fe_3O_4$) phase with face-centered cubic structure but post annealed iron oxide nanoparticles at $700^{\circ}C$ were mainly magnetite phase with trivial maghemite ($\gamma-Fe_2O_3$) phase which was induced in the post annealing treatment. The crystallinity of the iron oxide nanoparticles is enhanced by the post annealing treatment. The particle size of the as-synthesized iron oxide nanoparticles was about 5 nm and the particle shape was almost spherical. But the particle size of the post annealed iron oxide nanoparticles at $700^{\circ}C$ was around 25 nm and the particle shape was spherical and irregular. The as-synthesized iron oxide nanoparticles showed superparamagnetic behavior, but post annealed iron oxide nanoparticles at $700^{\circ}C$ did not show superparamagnetic behavior due to the increase of particle size by post annealing treatment. The saturation of magnetization of the as-synthesized nanoparticles, post annealed nanoparticles at $500^{\circ}C$, and post annealed nanoparticles at $700^{\circ}C$ was found to be 3.7 emu/g, 6.1 emu/g, and 7.5 emu/g, respectively. The much smaller saturation magnetization value than one of bulk magnetite can be attributed to spin disorder and/or spin canting, spin pinning at the nanoparticle surface.

• Advances in nano research
• /
• 제4권1호
• /
• pp.1-14
• /
• 2016

Superparamagnetic iron oxide nanoparticles (Nps), composed of magnetite, $Fe_3O_4$, or maghemite, ${\gamma}-Fe_2O_3$, core and biocompatible polymer shell, such as dextran or chitozan, have recently found wide applications in magnetic resonance imaging, contrast enhancement and hyperthermia therapy. For different diagnostic and therapeutic applications, current attempt is focusing on the synthesis and biomedical applications of various ferrite Nps, such as $CoFe_2O_4$ and $MnFe_2O_4$, differing from iron oxide Nps in charge, surface chemistry and magnetic properties. This study is focused on the synthesis of manganese ferrite, $MnFe_2O_4$, Nps by most commonly used chemical way pursuing better control of their size, purity and magnetic properties. Co-precipitation syntheses were performed using aqueous alkaline solutions of Mn(II) and Fe(III) salts and NaOH within a wide pH range using various hydrothermal treatment regimes. Different additives, such as citric acid, cysteine, glicine, polyetylene glycol, triethanolamine, chitosan, etc., were tested on purpose to obtain good yield of pure phase and monodispersed Nps with average size of ${\leq}20nm$. Transmission electron microscopy (TEM), X-ray diffraction, energy dispersive X-ray spectroscopy (EDX), $M\ddot{o}ssbauer$ spectroscopy down to cryogenic temperatures, magnetic measurements and inductively coupled plasma mass spectrometry were employed in this study.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제11권6호
• /
• pp.35-42
• /
• 2006

본 연구는 시멘트/Fe(II) 시스템에서 TCE의 환원성 탈염소화에 관여하는 유효반응성분을 규명하기 위하여 수행되었다. 먼저 시멘트 자체에 존재하거나 혹은 그 수화물에 존재하는 성분을 다량 함유하고 있는 hematite(${\alpha}-Fe_2O_3$), lepidocrocite(${\gamma}$-FeOOH), akaganeite(${\beta}$-FeOOH), ettringite($Ca_6Al_2(SO_4)_3(OH)_{12}$)를 대상으로 TCE 분해실험을 수행하여 이러한 물질이 시멘트/Fe(II) 시스템에서 탈염소반응에 관여할 수 있는지 고찰한 결과, hematite가 잠재적 유효반응성분으로 선정되었다. 각 시스템의 반응속도상수를 비교해 본 결과 200 mM Fe(II)에 hematite와 CaO를 1 : 4(몰비)로 주입한 시스템($k\;=\;0.637\;day^{-1}$)이 기존의 cement와 Fe(II)을 이용한 경우($k\;=\;0.645\;day^{-1}$)와 가장 비슷한 동력학적 분해경향을 보인다는 것을 알 수 있었다. 처음에 pH 조절이 주목적으로 주입되었던 CaO 역시 분해반응에서 중요한 역할을 담당하는 것으로 나타났는데, CaO 첨가량이 증가할수록 hematite/CaO/Fe(II) 시스템의 분해능은 증가하다가 CaO 양이 일정 수준에 다다르면 증가세가 둔화되는 경향을 보여 주었다. SEM(Scanning Electron Microscopy) 분석을 통해서는 hematite/CaO/Fe(II) 시스템 내에서 분해능이 커질수록 육각형 판상의 결정이 새롭게 형성된다는 것을 확인 할 수 있었으며 이 결정은 portlandite, green rust($SO_4$), Friedel's salt 등일 가능성이 높은 것으로 판단되었다. 그리고 동일 시료의 XRD(X-Ray Diffraction) 분석을 통해서는 hematite, magnetite/maghemite, green rust($SO_4$)의 존재를 확인할 수 있었다. SEM 및 XRD 분석에서 공통적으로 나타나는 green rust($SO_4$)가 유효반응성분일 가능성이 높다고 판단되었다.

• 한국재료학회지
• /
• 제23권4호
• /
• pp.233-239
• /
• 2013

We collected Seokganju minerals (regions in Gyeryong Mountain, Sangsin-ri, Banpo-myeon, Gongju Chungcheongnam-province), which were used as natural color pigments for grayish-blue during the 15th~16th centuries of the Joseon era, and investigated their crystallographic features to develop a black pigment having a spinel structure. By a Raman analysis, the color of Seokganju under transparent glaze as a pigment for painting was black because hematite ($Fe_2O_3$) in Seokganju was converted to magnetite ($Fe_3O_4$) However, Seokganju into the transparent glaze as a pigment was brown because of hematite ($Fe_2O_3$) and small amounts of maghemite (${\gamma}-Fe_2O_3$) in Seokganju minerals. Only Seokganju mineral is used, it is not suitable for black pigment into the transparent glaze. This study tried to develop a spinel crystal black pigment stabilized by Seokganju with CoO, $Cr_2O_3$, NiO, and $MnO_2$ at $1280^{\circ}C$. A Raman spectroscopy analysis was performed to verify the presence of Mn The results showed that it existed as spinel, and two crystal phases $CoFe_2O_4$ and $MnFe_2O_4$ were mixed. $CoFe_2O_4$ spinel has a dark grayish black color and $MnFe_2O_4$ spinel has a greenish black color, and these two appeared as black. The color of a specimen calcined by adding 6 wt% of pigment mixed with 5 wt% of $MnO_2$ added to lime glaze was analyzed with a UV spectrophotometer. When applying the color pigment, it appeared black stabilized with $L^*$24.23, $a^*$ 0.12, $b^*$ -2.29 at $1260^{\circ}C$ oxidative calcination, With $1240^{\circ}C$ reduction firing, it is appeared black stabilized with low brightness of $L^*$ 23.13, $a^*$ -1.12, $b^*$ 0.54.

• 자원환경지질
• /
• 제47권4호
• /
• pp.335-349
• /
• 2014

선캄브리아기 경기육괴의 북서부에 위치한 포천 스카른 광상은 명성산 화강암과 선캄브리아기 변성퇴적암류에 협재된 탄산염암의 접촉대를 중심으로 산출되며, N-S방향 전단대를 따라 배태되고 있다. 포천 스카른대 분포와 함께 광물학적 특성은 구조 규제와 암층 규제에 따라 유도되었다. 포천 스카른은 스카른 광물조합에 따라 백운암을 교대한 Na-Ca계열과 Mg계열 스카른 및 석회암을 교대한 Ca계열 스카른으로 구분된다. 철광화작용은 주로 Na-Ca계열 스카른대를 따라 배태되고 있으며, 후퇴 스카른 단계에 일부 동 광화작용이 중첩된다. Na-Ca계열 스카른은 주로 추휘석, 투휘석, 조장석, 석류석, 자철석, 매그헤마이트, 경석고, 인회석, 스핀의 공생관계를 보이며, 후퇴 스카른에서는 투각섬석, 금운모, 녹렴석, 견운모, 석고, 녹니석, 석영, 방해석, 황화광물로 구성된다. 한편 Mg계열 스카른은 주로 감람석과 투휘석의 단순한 광물조합을 보이며, 투휘석과 감람석은 투각섬석과 함께 소량 금운모, 사문석, 녹니석으로 교대된다. 반면에 Ca계열 스카른은 전진 스카른 단계에서 주로 단사휘석, 석류석, 규회석이 정출되며, 후퇴 스카른에서 녹렴석, 베수비아나이트, 각섬석, 흑운모, 녹니석, 자철석, 석영, 방해석, 황화광물이 수반된다. 전자현미분석 결과에 의하면 포천 스카른광물은 대부분 Na-Mg 성분이 부화되었으며, 높은 $Fe^{3+}/Fe^{2+}$비, $Mg^{2+}/Fe^{2+}$비, $Al^{3+}/Fe^{2+}$비의 조성 특징을 보인다. 즉 단사휘석은 추휘석과 투휘석 조성이 부화되어 있는 반면, 석류석은 상대적으로 그로슐라 조성이 부화된 경향을 보인다. 또한 각섬석은 투각섬석, 파가사이트, Mg-헤이스팅사이트로 조성변화를 보인다. 한편 전진 스카른 단계의 주요 광물조합은 약 0.5 kbar와 $X(CO_2)=0.10$ 조건에서 $400^{\circ}{\sim}500^{\circ}C$ 온도와 높은 산화 환경($fO_2=10^{-23}{\sim}10^{-26}$)을 지시하고 있다. 후퇴 스카른 단계에서는 물-암석반응이 증가됨에 따라 녹렴석, 베수비아나이트, 각섬석, 녹니석, 석영, 방해석은 $X(CO_2)=0.10$ 조건에서 $250^{\circ}{\sim}400^{\circ}C$ 온도 범위에서 정출되었다.