• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.3
• /
• pp.82-91
• /
• 1996

This is a basic study for the static and dynamic analysis on the elasto-plastic and elasto-viscoplastic of an axi-symmetric shell. The objective of this study was to investigate the mechanical characteristics of a nuclear reinforced concrete containment structure, which was selected as a model, by a numerical analysis using a finite element method. The structure was modeled with discrete ring elements of 8-noded isoparametric element rotating against the symmetrical axis, and the interaction between the foundation and the structure was modeled by Winkler's model. Also, the meridional tendon was modeled with 2-node truss elements, and the hoop tendon was done with point elements in two degrees of freedom. The effect of the tendon was considered without the increasement in total degree of freedom as the stiffness matrix of modeled tendon elements was assembled on the stiffness matrix of ring elements linked with the tendon. The results obtained from the analysis of an example were summarized as follows : 1. The stresses in the hoop direction on the interior and exterior surfaces of the structure were shown in changes of similar trend, and high stresses appeared on the structure wall 2. The stresses in the meridional direction on the interior and exterior surfaces were shown in change of different trend. Especially, the stresses at the junctions between the dome and the wall and between the wall and the bottom plate of the structure were very high, compared with those at other parts of the structure. 3. The stress changes in the direction of thickness on the crown of the dome were much linearly distributed. However, as the amount of tendon increased, the stresses in the upper and lower parts of the wall established with the tendon were shown stress concentration. 4. The stress changes in the direction of thickness on the center of the structure wall was linearly distributed in the all cases, and special stress due to the use of the tendon was not shown.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.143-154
• /
• 2007

This study's purpose is how express gender image according to sex in editorial fashion photography. This study's objectives are the women's magazine Vogue, Harper's Bazaar and man's magazine GQ, Esquire published 2000-2005 within the country. The photography was classified with established a standard based on the precede studies. The photo is classified Gender image according to dress and its ornaments, model character and atmosphere by Sex Expression of femininity woman has exposure of body parts and emphasizing thin eyebrows and red lips, soft and mild image, modest and static pose. Man expressed femininity used ladylike color and pattern, erotic exposure of body and long hair style. Commonly emphasizing red lips, natural background of flower plant, S-line. For expression of masculinity man and woman are used masculinity item, short hair-style and thick eyebrows. And also emphasize square like chin and shoulder. Specially, woman used direct silhouette to conceal soft body curved line. The expressions of androgynous woman and man are colorful dress and make-up. Woman emphasized male face to show and man expressed soft image through hull of abundant material of fur. All two sex selected method that conceal body curved line and face to express sexless. Hiding characteristics of body and face make indistinct of sex. The gender is affected by atmosphere such as model and illumination background as much as clothes because of the editorial fashion photography.

• Journal of the korean veterinary medical association
• /
• v.13 no.3
• /
• pp.161-166
• /
• 1977

A survey on prevalence and the efficiency of the field chemotherapeutical administration on fascioliasis-param-phistomiasis about 524 dairy cattles of 20 heards was carried out in the areas of the northern parts of the Gyeonggi-Do by means of fecal examin

• 시스템엔지니어링워크숍
• /
• s.4
• /
• pp.151-154
• /
• 2004

This paper presents the general system theory and its applications to the safety analysis method that is a recent trend over the traditional event-driven model. This new model is known as STAMP(Systems Theory Accident Modeling and Process)proposed by Nancy G. Leveson in MIT. The new model has benefits of systemic approaches concerning the system safety as a whole including the context it is in, its stimulants and outcomes, and its parts as well as the relationships among them in a holistic manner. The method consists of a hierarchical control structure, a process model, and the safety constraints governing the control. This paper demonstrates an example the contrasts the differences between the approaches of STAMP and the traditional safety models.

• 보존과학연구
• /
• s.26
• /
• pp.41-56
• /
• 2005

A set of horse bit from the Eonnam-ri site consists of three parts, pyo , ham , andinsu , and each part takes a shape of a piece of bar. According to current typological study, the pyo is S type, the insu is two-braided line type, and the outer rim of the ham is double rim type, respectively. According to X-ray test, inlaid design seems to have been decorated on the whole surface of the iron bit, originally. However, inlaid pattern partially remained. While the part of bit stopper is designed with flame pattern, the part of rein joint is designed with cloud pattern. According to XRF and XGT analysis of inlaid material, the content of silver is not more than 50%. The line inlay method making grooves on the surface of iron, then in laying a silver thread into them, and grinding the surface in a direction was adoptedin the manufacture of the iron bit.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.2
• /
• pp.19-30
• /
• 1994

Generally, a planning problem in a flexible manufacturing system is considered to be a composite of three interdependent tasks : part selection, loading, and routing mix. This research presents a mathematical model which can concurrently solve part selection, loading, and routing mix problems, so the problems that are caused by treating the planning problems independently are solved. The mathematical model is aimed to minimize system unbalance and the number of late parts, including constraints such as machine capacity, tool magazine capacity, and tool inventory. To illustrate the application of the model, an example is included. Solution procedure based on Lagrangian relaxation is also suggested for larger-sized problems.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.3
• /
• pp.1-8
• /
• 2004

The purpose of this study was to investigate gather as decoration techniques of clothes. In this study, we defined 21st century as the modern fashion. And analyzed design that applied gather concerned with Milan, New York, London, Paris, Tokyo Woman's Collections. Data were used from Fashion News and Gap Press Magazine (2001-2004). The results of this study were as follows: 1. Gather was the most original techniques among decoration techniques of clothes and formed three-dimensional space. 2. There were many kinds of gather such as cluster gather, all gather, shirring, smoking, frill, flounce, ruffle. and it gave a different impression with Fabrics, cutting method, sewing method, parts that were used. 3. Gather had practical functions providing enough space in activity and was presented as new shape by three-dimension body motion when it was put on. 4. After analyzing design that applied gather showed in collections, there were various appearance according to designer's sensitivity.

• The Magazine of the IEIE
• /
• v.23 no.3
• /
• pp.83-93
• /
• 1996

Picture archiving and communications systems(PACS) for digital image distribution, archiving and transmission, represent the modern hospital. PACS is the medical image management system within a hospital, whereas teleradiology system is the medical image communication system between remote sites. PACS and teleradiology systems usually consists of mainly four parts such as image acquisition part, image storage and database part, Image communication network part, and image display workstation part. Among these components comprised In the PACS, workstations are the point of contact between a PACS and the radiologist or referring physician. Therefore, the acceptance of PACS is highly dependent on workstation functionality, performance and easy of use compared with the conventional film-based radiology. This paper describes overall configurations and some requirements of PACS and teleradiology.

• 한국기계연구소 소보
• /
• s.18
• /
• pp.67-74
• /
• 1988

The force sensor is essentially required in controlling robot manipulator in such applications as precise assembly of mechanical parts, deburring and polishing and various kinds of 6-axis force sensors are developed for these application. This paper presents the algorithm of horizontal assembly of circular cross-sectional workpiece using 3-axis force sensor and procedure to develop the sensor. The sensor is calibrated and tested using AID converter and 16 bit micro computer. The result is $\pm$0.03% FS of zero stability, 0.1%FS of linearity and $\pm$0.05% FS of resolution. The sensor will be used in the research of robot application such as assembly and deburring interfaced with micro computer based robot controller which is under development at the robotics lab.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.543-548
• /
• 1994

This is the paper on the development of assemnly automation and visual inspection system for smart card reader connector. The automation consists of 3 main process injection, assembly and inspection. During the injection, the main pin of a reel. transferred under uniform tension, is cut with an injection interval and positioned precisely to an injection mold by roll feeder after injection. The main base is stacked to a magazine for main pin's exact positionning to a mold . For last effective production, The turn table and pick & place are driver with gears and came by a single monter. We developed the small parts handling technigue for stable supply of micro ist pin and 2nd pin and could determine the orientation and position of those pins. For reliable inspection, We used the vision system which examins the guality of arranged pins with a CCD camera. The connector models which can be manufactured with this system are 8 pin and 10 pin type. The user can select the connector model for production and adjust the torerable error range during the inspection of arranged pins.