• 기술사
• /
• 제44권2호
• /
• pp.34-38
• /
• 2011

Foot and mouth disease (FMD) is a highly contagions disease of cloven-hoofed animals and occurs in many non-European countries, in particular in huge parts of Asia including Turkey, in most countries of Africa and in parts of South America. The extreme contagiousness of the disease requires comprehensive to control an outbreak, causing high economic losses. The outbreak of FMD, which affects livestock including cattle, swine,sheep,goats,deer and other animals as a highly communicable disease that affects. The agency issued a statement noting that FMD disease does not spread to humans. The disease and meat from infected animals are news reports that more than 3.400.000 livestock have been ordered slaughtered so far across the country.

• 전자통신동향분석
• /
• 제35권4호
• /
• pp.42-52
• /
• 2020

The world's first 5G commercial service started in Korea in April 2019. This makes us proud of our status as an ICT powerhouse, and of the domestic optical network industry ecosystem that has served as a lever to make this significant leap forward in technological and industrial competitiveness. Above all, Japan's trade regulations on core parts and the COVID-19 pandemic have led to new changes across cultures, societies, and economies, and 5G networks have become important. The relevant technology for core material parts is a major concern not only of a few industries, but an entire section of society in terms of national competitiveness. In this article, we discuss the role of industries through the analysis of prospects of optical component technology with regard to the changes in the economic and social paradigm caused by the COVID-19 pandemic and Japan's export regulations.

• 한국기계연구소 소보
• /
• 제4권1호
• /
• pp.19-26
• /
• 1981

Fatigue, the birth and growth of cracks in metal parts subjected to repeated loading, has been a problem plaguing engineers since the Industrial Revolution and the advent of rotating or reciprocating machinery. Designing against metal fatigue was studied briefly in several aspects. Examples of fatigue failures were shown. Fatigue was classified by loading: uniaxial Fatigue, multiaxial fatigue, cumulative fatigue da¬mage. Fatigue design criteria were discussed: Infinite-Life Design, Safe-Life Design, Fail-Safe Design, and Damage Tolerant Design. Mitigation of notch effects by design, improvement of fatigue strength of metal parts by residual stress and surface finishing were discussed. Relative fatigue beha¬vior was studied under various environmantal conditions. Especially the effects of corrosion, temperature, fretting, and irradiation were covered.

• 보존과학연구
• /
• 통권24호
• /
• pp.61-79
• /
• 2003

The position of each part of the Ten storied pagoda of Gyeongcheonsa has been changed because of illegal dismantlement and assembling throughout the history. There remain carved letters in the part of pagoda, which let us know the incorrect assembling of the parts, however, we still don't know the reasons. The pagoda has been under conservation process by the conservators from Conservation Science Division in the National Research Institute of Cultural Properties. It is one of the main purposes to find an original structure of the pagoda by appropriate assembling. The existence of iconography and carved letters are very useful in the conservation process. Mis-assembled parts are mostly in the pedestal of the Chinese letter('아') and in the bodies up to third floor. The iconography of the pagoda has many similarities to the Ten storied pagoda of Wongaksaji.

• 보존과학연구
• /
• 통권19호
• /
• pp.159-177
• /
• 1998

Three-story Stone Pagoda(East) on Kamǔnsa temple constructed in A.D. 682 during the reign of King Shinmun-wang of the Unified Shilla period(668~935) was repaired by Cultural Properties Office in 1996. At that time, 27 objectsincluding sari case, small Buddha etc. were excavated. The 26 objects on foundation parts have been treated. Several objects were analyzed by EDXRF. As a result, the small Buddha of gilt bronze was proved to be an gold amalgam. The degree of gold purity was about 22K, and the excellence of gold-refining technique of that day was verified.

• 월간산업보건
• /
• 통권8호
• /
• pp.4-30
• /
• 1988

Examination of working environments was conducted to get more detailed data about harmful working environments and to make a contribution to more effective management. Study was carried out on 722 factories located in Taegu city and eight counties in Kyungpook Province, Korea, for a period of one year, from February 1 to December 30, 1986. The total number and proportion of workers exposed to harmful material was 37,697, 45.2% among 83,368 workers. The results according to exposed material were as follows: 1. In the case of noise, proportion of exceeding the 8-hour TLV was 59%, Included were nail-cutting in assembly metal manufacturing industry and weaving process in textile. 2. Dust in mill process of coal manufacturing industries exceeded the TLV of second class of dust at all parts and exceeded the TLV at 6% as a whole.: 3. The fields of industry lower than 70 lux of illumination were storage equipment of food, auto-winder of textile, painting of wood wares and coal mixing, and 44% of all cases was lower than standard. 4. As a result of temperature index investigation(WBGT), about 12% of all sujects exceeded limit value. Included parts were rolling machine and reducing room. 5. In the case of organic solvents, TLV was exceeded at about 8%, The parts exceeded TLV according to materials belonged to this category were as follows. 1) Toluene: adhesive work in assembly metal manufacturing 2) Xylene: printing and paint mixing in chemical manufacturing 3) Methyl ethytl ketone: paint mixing in all parts examined and coating machine partially in chemical manufacturing 4) Methyl isobutyl ketone: printing in chemical manufacturing 5) Acetone: vapor polishing in assembly metal manufacturing 6. Among specified chemical materials, the concentration of HC1 in the air in metal assembly manufacturing factory exceeded TLV. in one of three assembly metal manufacturing examined. Others, such as benzene, acetic acid, formic acid, sodium hydroxide, formalin, ammonia, copper, chromate etc. were lower than TLV in its indoor atmospheric concentration. As a whole, the proportion of exceeding TLV was about 0.8% 7. The concentrations of inorganic lead were lower than TLV in all parts examined. The results of this investigation show the fact that current management of working environments is not satisfactory, and so more active management is needed.

• 보존과학연구
• /
• 통권25호
• /
• pp.171-195
• /
• 2004

This research presents an evaluation of the weathering and deterioration state of the Wanggung-ri five-storied stone pagoda in the Iksan (National Treasure No. 289) and suggests conservational schemes. A deterioration map of the pagoda was drawn from the aspects of petrological, physical, chemical, biological, structural and artificial weathering.The rock properties consisting of the pagoda were medium-grained biotite granite that had leucocratic phenocryst developed in parts. The body of each story suffered severely from the secondary contamination that turned the colors into light grey, pitch dark, yellowish brown, and reddish brown as well as granular decomposition, exfoliation and peel-off. The roof stones were heavy exfoliated or peeled off in most of the cases. In addition to the fine cracks, there were layered cracks on the corners. The roof stones of the3rd and 4th story in the north and west side had some stones fall-off, while those of the 2ndstory in the north side had steel reinforcement filled for a fixing purpose. Those of the 5th story showed big gaps that must have originated from cracks and were easily subject to granular decomposition and rainfall. The inside clay filler was missing in the lower part of the roof stones of the 4th and 5th story and the supporting stones, which were thus covered by light grey or pitch dark sediments. The contact area of the materials was about 70 % in the parts where there was a space due to the filler missing and washigher than 90 % in the lower parts of the pagoda. About 90 % or more of the roof stones surface of each story were covered by aerial plants that formed a thick biological mat. Thus it seemed necessary to come up with the conservational measures to remove the plans living on the surface of the stone materials, with the plans to prevent rain from falling inside, and with the water repellent and hardening treatments to postpone the surface weathering of the rock properties. All those measures and plans must be based on the results of long-term monitoring and thorough detail investigations.

• 한국기계연구소 소보
• /
• 통권14호
• /
• pp.111-119
• /
• 1985

A review on the design analysis of an axial-flow turbine is presented. Followed by a brief introduction to the fundamentals on an axial-flow turbine, a design procedure is described with a sample design of one for a small turbo-jet engine. Design procedure is composed of two parts: one-dimensional analysis of three-dimensional effects based on radial equilibrium theory. The method described herein is so simple and rapid that it can be applied to the preliminary design analysis of turbo-machinery equipped with axial-flow turbines.

• 대한방사선협회지
• /
• 제25권1호
• /
• pp.18-18
• /
• 1999

We have studied DR of medical science at SNUH since early 90's, founded the basis of Picture Archiving Communication System(PACS) used for actual clinic parts, has acquired images gradually since January H and came to acquire images in all examinations ex

• 열병합발전
• /
• 통권27호
• /
• pp.5-9
• /
• 2002

High pressure steam pipe in power plants is subjected to service conditions under which creep processes take place limiting the component's lifetime. To ensure a safe and economic operation it is necessary to get accurate information about the lifetime situation of single components as well as of the whole system. Careful evaluation is combined with FEM analysis, NDT, microstructure evaluation. Especially, 14MoV63 steel is used as material for main steam pipe for 30 years old power plants. In service inspections have shown an increasing number of cracks and creep cavities beside stress concentration parts. A detailed analysis came to the conclusion that lifetime has been consumed to a high degree, 80%level.