• Transactions on Electrical and Electronic Materials
• /
• 제1권1호
• /
• pp.32-39
• /
• 2000

Langmuir probe measurements of electron density, electron temperature and potential are mad in the early stage (<5${\mu}$s) of a laser ablated plasma plume, in which a positive current form positive ions and a electron current are overlapped. The plasma wes produced by focusing the second harmonic, 532 nm, of Q-switched Nd:YAG laser on a high purity carbon target. Then the laser intensity on the target of ~1.6${\times}$10$\^$15/ W/$\textrm{cm}^2$. The measured electron desities and temperatures are ~2${\times}$10/sip 11/ cm$\^$-3/ and -3 eV. In particluar , the phenomenon that the electron temperature decreased and then increased was observed,. It could be well explained that this phenomenon occurred in the process of inverse Bremsstrahlung of free electrons in plasma. Additionally, the plasma potential(>11V) was higher than the published values.

• 대한치과기공학회지
• /
• 제15권1호
• /
• pp.27-41
• /
• 1993

Degree of noise by personal dental laboratory working process and degree of noise by complex dental laboratory working process were measured separtely. The time of exposure to noise greater than 70dB was analyzed. Then, the whole degree of noise in dental laboratory was estimated on the basis of afore-mentioned information. Questionaire were employed to investigate the mental, emotional and physiological effects of noise in dental technicians, The purpose of this study was to provide basic information on keeping dental techneicans who are exposed to noise pollution in good working condition and good health. Results obtained are as follows ; 1. Polishing process in each working part showed high degree of noise greater than 70dB in terms of degree of noise by personal working. 2. Degree of noise by complex working process in each working part was greater than that of personal working process. 3. Time of exposure to noise complex working process the part of porcelain 150min, partial denture 120 min, crown and bridge 100 min, full denture 80 min. 4. Degree of noise by time in dental laboratory was 80dB in general for polishing process and below 75dB for waxing process. 5. Effects of noise on mental and emotional state of dental technicians showed that they felt irritated every day(14%), irritated once in a while(29%) and easily ger mad(19%). 6. Effects of noise on heart and stomach were hyper-gastric acid(38%), gastric ulcer(11%), gastritis(5%), deuodenal ulcer(3%) and weak heart function(32%). 7. Effects of noise in the hearing ability were weak(39%), moderate(33%) and normal(14%) Data presented in this study demonstrated that noise in the dental laboratory exerts profound effect on dental technicians mentally, physiologically and emotionally, in light of the above results, therefore, it appears advisable to devots substantial on the management of working condition and put further(continuing) efforts in the investigation for reducing noise problem.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권6호
• /
• pp.845-854
• /
• 2016

Characteristics and properties of gelatin from goat skin pretreated with NaOH solutions (0.50 and 0.75 M) for various times (1 to 4 days) were investigated. All gelatins contained ${\alpha}$-chains as the predominant component, followed by ${\beta}$-chain. Gelling and melting temperatures of those gelatins were $23.02^{\circ}C$ to $24.16^{\circ}C$ and $33.07^{\circ}C$ to $34.51^{\circ}C$, respectively. Gel strength of gelatins increased as NaOH concentration and pretreatment time increased (p<0.05). Pretreatment for a longer time yielded gelatin with a decrease in $L^*$-value but an increase in $b^*$-value. Pretreatment of goat skin using 0.75 M NaOH for 2 days rendered the highest yield (15.95%, wet weight basis) as well as high gel strength (222.42 g), which was higher than bovine gelatin (199.15 g). Gelatin obtained had the imino acid content of 226 residues/1,000 residues and the gelatin gel had a fine and ordered structure. Therefore, goat skin gelatin could be used as a potential replacer of commercial gelatin.

• 대한전자공학회논문지SP
• /
• 제44권1호
• /
• pp.26-39
• /
• 2007

H.264/AVC 표준은 기존의 부호화 기법보다 뛰어난 압축 성능 때문에 비디오 데이터의 압축과 전송에 널리 응용될 것으로 전망된다. 그러나 H.264/AVC 표준도 기존의 비디오 압축표준과 마찬가지로 가변길이부호화 방식을 따르기 때문에, 동영상을 부호화할 때 발생하는 데이터량은 시간의 흐름에 따라 큰 폭으로 변한다. 이 때문에 PSTN이나 ISDN 망과 같이 대역폭이 고정된 네트워크를 통해 비디오 비트 스트림을 전송하고자 할 경우에는 부호기로부터 출력되는 비트량을 제어할 필요가 있다. 본 논문에서는 전송율이 고정된 비디오 전송채널 환경에서 H.264/AVC 부호화 기법으로 압축된 영상 데이터를 전송할 때 장면전환에 효율적인 비트율 제어 방식을 제안한다. 즉, 제안하는 비트율 제어 방식은 장면 전환과 같이 움직임이 많은 부분에서는 이전 프레임과 현재 프레임간의 움직임 변화량을 예측하여 움직임의 양에 따라 2차원 RD 모델 식을 수정하여 프레임 단위로 비트량을 효율적으로 제어하는 방법이다. 또한 장면전환이 많은 영상일 경우에 버퍼의 넘침을 방지하기 위해서 효율적인 프레임 스킵 방법을 제안한다. 실험 결과는 화면간 움직임이 많은 영상의 경우, 기존의 비트량 제어 방법이 채널 전송에 부적합할 정도로 비트량을 초과하지만, 제안한 방법은 채널 전송에 적합하게 효율적으로 부호화한다. 또한 기존 비트율 방법보다 제안한 방법의 프레임 스킵 개수가 적어 화면간의 끊김 현상이 줄었다.