• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1626-1637
• /
• 2020

This work covers an important point of the benchmark released by the expert group on Uncertainty Analysis in Modeling of Light Water Reactors. This ambitious benchmark aims to determine the uncertainty in light water reactors systems and processes in all stages of calculation, with emphasis on multi-physics (coupled) and multi-scale simulations. The Gesellschaft für Anlagen und Reaktorsicherheit methodology is used to propagate the thermal-hydraulic uncertainty of macroscopic parameters through TRACE5.0p3/PARCSv3.0 coupled code. The main innovative points achieved in this work are i) a new thermal-hydraulic model is developed with a highly-accurate 3D core discretization plus an iterative process is presented to adjust the 3D bypass flow, ii) a control rod insertion occurrence -which data is obtained from a real PWR test- is used as a transient simulation, iii) two approaches are used for the propagation process: maximum response where the uncertainty and sensitivity analysis is performed for the maximum absolute response and index dependent where the uncertainty and sensitivity analysis is performed at each time step, and iv) RESTING MATLAB code is developed to automate the model generation process and, then, propagate the thermal-hydraulic uncertainty. The input uncertainty information is found in related literature or, if not found, defined based on expert judgment. This paper, first, presents the Gesellschaft für Anlagen und Reaktorsicherheit methodology to propagate the uncertainty in thermal-hydraulic macroscopic parameters and, then, shows the results when the methodology is applied to a PWR reactor.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.173-176
• /
• 2002

Viscoplastic deformation and sheet forming behavior of multicomponent Zr-based bulk metallic glass alloy has been investigated. From a series of mechanical test results, basic processing maps based on Dynamic Materials Model have been constructed to establish feasible forming conditions. Stamping in laboratory scale was then performed at the various stroke speeds and temperatures using a hydraulic press. Failure in macroscopic level was examined to check the validity of constructed processing maps.

• 대한교통학회지
• /
• 제26권1호
• /
• pp.191-201
• /
• 2008

단속류의 교통시설 운영개선(TSM, Trasportation Systems Management)의 타당성 및 개선효과 분석을 위해 TRANSYT-7F(T7F)와 NETSIM이 많이 사용되고 있으나, T7F는 현실적인 차량군의 압축 분산효과가 미흡하고, NETSIM은 구축시간이 과다하게 소요되고, 용량설정의 어려움 등의 문제를 가지고 있다. 이에 반해, 충격파 모형은 T7F에 비해 차량군의 압축 분산을 더욱 사실적으로 묘사할 수 있으며, NETSIM에 비해서는 분석시간 단축, 적용용이성 등의 장점을 가지고 있어 우수하다. 하지만, 수리적 계산의 어려움으로 인해 비현실적인 교통류관계식(Q-K곡선) 적용, 단순한 차량군 적용 등의 문제점을 지니고 있다. 이러한 충격파이론을 이용한 기존 분석모형의 문제점을 해소하기 위해보다 현실적인 교통류관계식 적용, 새로운 차량군모형 개발, 연장충격파 개념 도입 등 새로운 분석모형을 개발하였으며, 개발모형의 유효성 검증을 위해 다양한 시나리오를 구성하여 T7F와 NETSIM과 비교 평가한 결과 우수한 성능을 보였다.

• Biomolecules & Therapeutics
• /
• 제7권4호
• /
• pp.347-353
• /
• 1999

Osteoarthrosis was induced in rabbit knees through resecton of anterior cruciate ligament. Sodium hyaluronate (1%) was administerated into articular space at the dose levels of 0.1 mg/kg once a week using 1ml sylinge and 26G needle for test groups. Saline was administrated for control groups. After 6 and 12 weeks, animals were sacrificed to conduct macroscopic observation and histopathologic examination. The articular lesions were evaluated and test groups were compared with control groups. No significant differencies were showed between test groups and control groups at macroscopic observation in both 6- and 12- week groups. In histopathologic examination, control groups showed higher osteoarthrosis than test groups. The articular surfaces of control groups showed fibrillation, denudation, pannus formation and hypocellularity. The articular surfaces of test groups showed fibrillaton and hypercellularity. These indicate that sodium hyaluronate has inhibitory effects on osteoarthrosis at least in rabbit and could be used for treatment of osteoarthrosis.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.318-321
• /
• 2009

The Efficacy of PSB-2061, was investigated in comparision with predinisolone in acetic acid and Picrylsulfonic acid solution (TNBS)-induced rat inflammatory bowel disease (IBD) for 5 days. 5 % TNBS solution were administered with polyethylene (P.E) tube inserted to rats intracolon, which causing colitis to the rats. The TNBS control group (the saline treated colitic rat) exhibited ulceration and inflammation of the distal colon with formation of granuloma and pathologic connections. We checked the inflammatory parameters like rat's weight, food intake quantity change during administration. After 5 days, we sacrificed the rats and checked the colon's length, ulcer and pathologic condition. Oral treatment with PSB-2061 resulted in significant recovery of macroscopic parameters like weight and diet intake change. Especially, PSB-2061 extract had a more potent effect than $mesalazine^{(R)}$ on macroscopic colonic damage score. We can suggest that PSB extract could be a promising drug in the treatment of IBD.

• Structural Engineering and Mechanics
• /
• 제30권1호
• /
• pp.99-117
• /
• 2008

This paper presents a comprehensive approach to the evaluation of macroscopic material parameters for natural stone and quarry masonry. To that end, a reliable non-linear material model on a meso-scale is developed to cover the random arrangement of stone blocks and quasi-brittle behaviour of both basic components, as well as the impaired cohesion and tensile strength on the interface between the blocks and mortar joints. The paper thus interrelates the following three problems: (i) definition of a suitable periodic unit cell (PUC) representing a particular masonry structure; (ii) derivation of material parameters of individual constituents either experimentally or running a mixed numerical-experimental problem; (iii) assessment of the macroscopic material parameters including the tensile and compressive strengths and fracture energy.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.167-175
• /
• 1998

A mathematical formulation is presented to model anisotropy from the deformation textures developed in a forming process. In this work, a micro-mechanical-based polycrystalline analysis is implemented into a consistent finite element method for the anisotropic, viscoplastic deformation of polycrystalline metals. As suggested by Taylor, the deformation of each grain in an aggregate is assumed to be same as the macroscopic deformation of an aggregate or a macro-continuum point. Algorithms are developed to represent the plastic anisotropy, such as the anisotropic yield surface and R-value, from the predicted deformation texture. As applications, the evolution of texture in rolling, upsetting and drawing/extrusion processes are simulated and the corresponding changes of mechanical properties such as yield surface and R-value are predicted.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.199-202
• /
• 2004

In this present study, an attempt was made to determine the deformation mode of the Zr-Ti-Cu-Ni-Be bulk metallic glass by compression test over a wide range of temperatures and strain rates. From the results, empirical deformation map could be constructed including the boundaries of different deformation modes. Considering power dissipation map and instability map developed on the basis of the Dynamic Materials Model (DMM), the processing map for extrusion could also be constructed. In addition, the macroscopic formability of this BMG alloy has also been examined through the extrusion in laboratory scale within undercooled liquid state. From the results of macroscopic extrusion formability, both deformation map and processing map present good criteria to determine optimal forming conditions.

• Structural Engineering and Mechanics
• /
• 제4권6호
• /
• pp.613-630
• /
• 1996

The homogenization method is used to develop a beam element in space for thermo-mechanical analysis of unidirectional composites. Local stress and temperature field in the microscale are described using the function of homogenization. The global (macroscopic) behaviour of the structure is supposed to be that of a beam. Beam-type kinematical hypotheses (including independent shear rotations) are hence applied and superposed on the microdescription. A macroscopic stiffness matrix for such a beam element is then developed which contains the microscale properties of the single cell of periodicity. The presented model enables us to analyse without too much computational effort complicated composite structures such as e.g. toroidal coils of a fusion reactor. We need only a FE mesh sufficiently fine for a correct description of the local geometry of a single cell and a few of the newly developed elements for the description of the global behaviour. An unsmearing procedure gives the stress and temperature field in the different materials of a single cell.

• 멤브레인
• /
• 제4권2호
• /
• pp.85-95
• /
• 1994

이 논문은 막을 통한 전기적 여과시 동적이동현상을 연구하는데 있다. 액상에서의 전기적 대류는 막내에서의 전하고분자 물질의 속도를 증진시키는데, 이 문제의 해법은 액상과 교상의 직접적인 접촉을 통해 연구되었다. 연산자이론이 이 문제를 풀기 위해 적용되었고, 막에서의 물리적 변수들을 분석하는데 이용되었다. 이논문의 이론적 고찰은 분리조작 설계하는데 이용된다.