• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.2
• /
• pp.52-60
• /
• 2004

High-speed machining is one of the most effective technologies to improve productivity. Because of the high speed and high feed rate, high-speed machining can give great advantages for the machining of dies and molds. High speed machine tool makers try to find best machining condition with the one that they have built. Machine builders need to develop test specimen since it helps finding characteristics o( machine tools when the machining properties of the specimen are analyzed. This paper develops test specimen to identify features of the main spindle, the feeding device, and the frame of a machine tool.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1206-1211
• /
• 2014

This study has been conducted to confirm the effect of sacrificial anode cathodic protection system for 90 days to protect corrosion on pier that is located in Korea. The cathodically protected structure was a slab and a pile cap. Before the construction of cathodic protection system, the macrography was carried out. As a result of the macrography, many corrosion traces were confirmed in this structure. The trace was mainly focused on joint and zones that concrete cover was eliminated. To apply the cathodic protection system, many onsite techniques have been adopted. In addition, to confirm the inner state of steel in concrete properly, a corrosion monitoring sensor (DMS-100, Conclinic Co. Ltd) has been applied. Test factors were corrosion & cathodic protection potential, 4 hour depolarization potential, resistivity and current density. After 90 days from the installation of cathodic protection system, it could confirm that proper corrosion protection effect was obtained by considering the result of tests.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.162-167
• /
• 2004

The low velocity impact characteristics of composite laminate curved beams are investigated to increase damage tolerance and reduce the deflection. Drop weight impact tests of the composite curved beam were performed with respect to pre-load, then the damage after impact was measured by macrography. Also, finite element analyses were performed using ABAQUS to investigate the stress state of composite curved beam with respect to pre-load and impact. From the investigation, it was found that pre-load of the composite curved beams had much influence on impact damage of the curved beam, which showed good agreement with the experiment results.

• Science of Emotion and Sensibility
• /
• v.11 no.2
• /
• pp.207-214
• /
• 2008

The inspection processing is for reducing loss which occurs fault because of fabric appearance. Up to now inspection machine which is used from inspection process is classified with the macrography inspection machine and the full automatic inspection machine. The macrography inspection machine is low price and efficient equipment but does not record information of fault. On the other side, the automatic inspection machine is high price, also the detection rate of one changes with effect of environment variable but able to record information of fault. It developed semi-automatic cloth inspection machine with the weak point of the macrography inspection machine and the automatic inspection machine was complemented. And when it uses information which was collected by semi-automatic cloth inspection machine, the loss rate of original fabric is able to calculate. So sewing factories will be able to predict fabric consuming quantity.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.345-347
• /
• 2007

This paper describes a case study on the failure cause analysis of power cables and their fittings. For more accurate analysis, electrical and chemical analysis techniques were employed from the macrography stage for the exterior of the cables to the entire disassembly stage. As a result it was confirmed that the power cables failed due to improper fabrication by which electric field was concentrated at the deadend of a shrink tube on the cable.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.179-182
• /
• 2001

Impacter tester was build of to evaluate the characterization of non-flamable Glass/phenol laminate plates under the low velocity impact. The damage of composite laminates are matrix cracking, delamination, and fiber breakage for impact energy. In this study, this is to find impact properties of Glass/phenol in used in a forehead part of lighting subway. To determine impact damage characteristics which is made in a laminate, use the UT C-scan after- macrography. And then evaluated the reduction of strength in a rate of impact energy with CAI(Compression After Impact) test

• International Journal of Contents
• /
• v.6 no.3
• /
• pp.25-29
• /
• 2010

Scanners play an important role in digitally reproducing the color and imaging of original documents used in public offices; however, the current system lacks a standard for digitized documents created by scanners, complicating efforts to create a digitized system. In particular, macrography cannot guarantee the accuracy and reliability of digitalized color documents, pictures, and photographs created by scanners. To this end, we develop a standardized evaluation tool and test target to certify digitalized documents created by a scanner in the domestic environment. In this study, we enhance the accuracy and reliability of scanned data to create an advanced standard evaluation tool for scanners. Moreover, to produce a scanner certification standard, we overcome existing problems related to the growing market. We anticipate that this new standard will see a high degree of application in the current environment.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1409-1411
• /
• 2004

[$80\;\sim\;90\%$ of Information that human masters from outside are image information which depend on sight. So, in case machine takes the place of human's function, role of image processing is very important. However, because human's sight function is formed through evolution and studying for a long time, substituting it for computer attend with unexpected difficulty. In railroad, there are many field which the application of automation system is expected by using computer instead of safety watch that depend on usual human sight, macrography. But, there are many research field and conditions in the railroad when various outside conditions are considered, comparing with another field. This study analyses the recent image processing technology and reviews the task of image processing technology and its direction.]

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.167-179
• /
• 1998

Todays in the field of lens makers, the technology machinery equipment and investment is shrunken by many factors. But much more decisive investment is wanted to strengthen competitiveness. Most of all, the technology of management and quality examination is important in the confidence of lens. So external and internal examination must be accomplished scientifically not by macrography but by the microscope and the computer. As the hardness examination of glass in the automobile, that of spectacle lens must not be harmful to the human body. All the raw material of spectacle lens is being imported for the lack of technology. To overcome these circumstances. We must establish the research institute that can develop the technology and must train a technical expert.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.4
• /
• pp.129-141
• /
• 2006

The image data amount is increasing rapidly that used geography, sea information etc. with great development of a remote sensing technology using artificial satellite. Therefore, people need automatic method that use image processing description than macrography for analysis remote sensing image. In this paper, we propose that acquire texture information to use GLCM(Gray Level Co-occurrence Matrix) in red tide area of artificial satellite remote sensing image, and detects red tide area by PCA(principal component analysis) automatically from this data. Method by sea color that one feature of remote sensing image of existent red tide area detection was most. but in this paper, we changed into 2 principal component accumulation images using GLCM's texture feature information 8. Experiment result, 2 principal component accumulation image's variance percentage is 90.4%. We compared with red tide area that use only sea color and It is better result.