• Journal of the Korean Geotechnical Society
• /
• v.38 no.8
• /
• pp.29-37
• /
• 2022

A three-dimensional analysis is required to interpret the drainage behavior of an improved ground with vertical drains, and the macroelement method enables efficient interpretation considering the three-dimensional drainage effect of vertical drains under two-dimensional plane strain condition. In this study, a novel finite element analysis program was developed by applying the macroelement method to the vacuum consolidation method used in ground improvement practice. The conventional macroelement method was used to calculate the amount of drainage from the vertical drain by setting the excess porewater pressure in the drainage material to zero; however, the program developed in this study was improved to consider negative excess porewater pressure as an actual vacuum consolidation condition. To verify the performance of the program, because of a comparison with the measurement values at the site where the vacuum consolidation method was applied, results predicted by the program and field measurement data showed similar settlement behavior.

• Structural Engineering and Mechanics
• /
• v.22 no.4
• /
• pp.511-515
• /
• 2006

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.436-441
• /
• 1997

A Formulation based on macroelement concept is developed to analysis the prestressed concrete box girder bridges. The proposed method enables to model the arbitrary shapes and boundary conditions of prestressed concrete box girder bridges. The validity of the algoriyhm is demonstrated through comparisons with other results.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.1
• /
• pp.63-68
• /
• 1998

Multiple shoots obtained in MS medium suppler with 5.0 mg/L BA though shoot-tip culture. The frequency of vitrified shoot was lower on Bacto-agar medium than on Gelrite as gelling agent. Addition of activated charcoal at concentrations of 0.1~0.3% reduced vitrification and markedly increased shoot growth, and formation and growth of roots, but significantly reduced the number of shoots formed. The ratio of fresh weight to dry weight was decreased by increasing light intensity and agar concentration. Eight-tenths times of macroelement of MS medium was observed to be effective for shoot formation. Addition of IAA effectively promoted shoot formation in both shoot tip and node-bud explants. Supplement of 5.0 mg/L BA, 0.3 mg/L IAA to MS medium was most effective in shoot proliferation on shoot tip and node-bud explants.Multiple shoots obtained in MS medium suppler with 5.0 mg/L BA though shoot-tip culture. The frequency of vitrified shoot was lower on Bacto-agar medium than on Gelrite as gelling agent. Addition of activated charcoal at concentrations of 0.1~0.3% reduced vitrification and markedly increased shoot growth, and formation and growth of roots, but significantly reduced the number of shoots formed. The ratio of fresh weight to dry weight was decreased by increasing light intensity and agar concentration. Eight-tenths times of macroelement of MS medium was observed to be effective for shoot formation. Addition of IAA effectively promoted shoot formation in both shoot tip and node-bud explants. Supplement of 5.0 mg/L BA, 0.3 mg/L IAA to MS medium was most effective in shoot proliferation on shoot tip and node-bud explants.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.10-20
• /
• 2003

In this study, the effective properties were numerically calculated for laminated plain weave textile composites with arbitrary s tacking orientation angles. A single-field macroelement with modified sub-domain integration was used in the analysis to reduce computer resource requirement while efficiently accounting for the internal microstructure. A sample calculation procedure based on the Monte Carlo method was employed to consider the random shift between the layers. Results showed that a significant deviation occurred when the orientation angles were near 0 deg for extensional modulus and Poisson's ratio and 45 deg for the shear modulus. It was also found that the average properties calculated by the 2-layer numerical specimen had large differences compared to the CLT results, which indicated that a caution must be needed when designig of thin plain weave composite structures.

• Journal of Ship and Ocean Technology
• /
• v.5 no.1
• /
• pp.14-29
• /
• 2001

Concept and preliminary structural design methods, including large scale FEM analysis and optimisation, for large passenger ships, car passenger and RoRo/ passenger ships are dis-cussed. Applications and experiences in practical design usage are presented.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.252-260
• /
• 2008

This study was conducted to observe the characteristics of mineral nutrient uptake of single-node cutting rose 'Versilla' and to determine optimal nutrient solution control method for soilless culture of 'Versilla' in a closed hydroponic system. Nutrient solution was managed by five different control methods: macro- and micro-element control in aeroponic system (M&M), macroelement control in aeroponic system (M), nutrient solution supplement in aeroponic system (S); electrical conductivity (EC) control in aeroponic system(EC-A); EC control in deep flow technique system(EC-D). The concentration of $NO_3$-N exceeds optimal range whereas P and Mg decreased at the later stage of plant growth with the EC control method, EC-A and EC-D. The overall mineral nutrient content increased with S. On the other hand the nutrient content at the root environment was maintained optimal with M&M and M. The nutrient solution control methods had significantly effect on the cut-flower quality. In the M&M and M, flower length, fresh weight and root activity were higher than those with the other mineral nutrients control methods. The maximal efficiency of photochemistry (Fv/Fm) was higher for M&M, M and S than that with EC-A and EC-D. Based on the above results, it is highly recommended to control nutrient solution by mineral nutrient control methods (M&M and M) in a closed hydroponic system for single-node cutting rose, 'Versillia'.