• 한국주조공학회지
• /
• 제33권2호
• /
• pp.55-62
• /
• 2013

Effect of Fe and Mn contents on the castability of Al-4wt%Mg-0.9wt%Si system alloy has been studied. According to the analysis of cooling curve for Al-4wt%Mg-0.9wt%Si-0.3wt%Fe-0.3/0.5wt%Mn alloy, ${\alpha}-Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}-Al_5FeSi$ phases crystallized above eutectic temperature of $Mg_2Si$. Therefore, these phases affected both the fluidity and shrinkage behaviors of the alloy during solidification. As Fe and Mn contents of Al-4wt%Mg-0.9wt%Si system alloy increased from 0.1 wt% to 0.4 wt% and from 0.3 wt% to 0.5 wt% respectively, the fluidity of the alloy decreased by 26% and 33%. When Fe content of the alloy increased from 0.1 wt% to 0.4 wt%, 23% decrease of macro shrinkage and 19% increase of micro shrinkage appeared. Similarly, Mn content of the alloy increased from 0.3 wt% to 0.5 wt%, 11% decrease of macro shrinkage and 14% increase of micro shrinkage appeared. Judging from the castability of the alloy, Al-4wt%Mg-0.9wt%Si alloy with low content of Fe and Mn, 0.1 wt% Fe and 0.3 wt% Mn, is recommendable.

• 한국전산구조공학회논문집
• /
• 제24권4호
• /
• pp.413-419
• /
• 2011

나노 크기의 허니콤 구조물은 거시적 크기의 허니콤 구조물에 비해 보다 높은 부피 대비 표면적 비율을 구현하여 전기적, 화학적인 촉매로써 기능성을 극대화할 수 있다. 나노 크기의 구조물은 거시적 크기의 구조물과 다른 기계적 거동양상을 보이며 이는 표면효과에 기인한다. 이러한 표면효과는 원자 수준 전산모사(atomistic simulation)를 통해 규명할 수 있으나 나노 허니콤 구조물의 거동을 예측하는 것은 현실적으로 과도한 전산자원 및 계산시간으로 인해 불가능한 실정이다. 본 연구에서는 표면응력 탄성모델을 적용한 브리징방법을 균질화기법과 연계하여 나노 크기의 허니콤 구조물의 기계적 거동을 효율적으로 예측하였다.

• ETRI Journal
• /
• 제40권1호
• /
• pp.51-60
• /
• 2018

In Long Term Evolution (LTE) cellular networks, the transmit power control (TPC) mechanism consists of two parts: the open loop (OL) and closed loop. Most cellular networks consider OL/TPC because of its simple implementation and low operation cost. The analysis of OL/TPC parameters is essential for efficient resource management from the cellular operator's viewpoint. In this work, the impact of the OL/TPC parameters is investigated for homogeneous small cells and heterogeneous small-cell/macrocell network environments. A mathematical model is derived to compute the transmit power at the user equipment, the received power at the eNodeB, the interference in the network, and the received signal-to-interference ratio. Using the analytical platform, the effects of the OL/TPC parameters on the system performance in LTE networks are investigated. Numerical results show that, in order to achieve the best performance, it is appropriate to choose ${\alpha}_{small}=1$ and $P_{o-small}=-100dBm$ in a homogenous small-cell network. Further, the selections of ${\alpha}_{small}=1$ and $P_{o-small}=-100dBm$ in the small cells and ${\alpha}_{macro}=0.8$ and $P_{o-macro}=-100dBm$ in the macrocells seem to be suitable for heterogeneous network deployment.

• 한국소음진동공학회논문집
• /
• 제19권2호
• /
• pp.138-145
• /
• 2009

Structural vibration and noise are hot issues in underwater vehicles such as submarines for their survivability. Therefore, active vibration and noise control of submarine, which can be modeled as hull structure, have been conducted by the use of piezoelectric materials. Traditional piezoelectric materials are too brittle and not suitable to curved geometry such as hull structures. Therefore, advanced anisotropic piezocomposite actuator named as Macro-Fiber Composite(MFC), which can provide great flexibility, large induced strain and directional actuating force is adopted for this research. In this study, dynamic model of the smart hull structure is established and active vibration control performance of the smart hull structure is evaluated using optimally placed MFC. Actuating performance of MFC is evaluated by finite element analysis and dynamic modeling of the smart hull structure is derived by finite element method considering underwater condition. In order to suppress the vibration of hull structure, Linear Quadratic Gaussian(LQG) algorithm is adopted. After then active vibration control performance of the proposed smart hull structure is evaluated with computer simulation and experimental investigation in underwater. Structural vibration of the hull structure is decreased effectively by applying proper control voltages to the MFC actuators.

• Advances in biomechanics and applications
• /
• 제1권1호
• /
• pp.23-40
• /
• 2014

This paper examines the blood chamber of a left ventricular assist device (LVAD) under static loading conditions and standard operating temperatures. The LVAD's walls are made of a temperature-sensitive polymer (ChronoFlex C 55D) and are covered with a titanium nitride (TiN) nano-coating (deposited by laser ablation) to improve their haemocompatibility. A loss of cohesion may be observed near the coating-substrate boundary. Therefore, a micro-scale stress-strain analysis of the multilayered blood chamber was conducted with FE (finite element) code. The multi-scale model included a macro-model of the LVAD's blood chamber and a micro-model of the TiN coating. The theories of non-linear elasticity and elasto-plasticity were applied. The formulated problems were solved with a finite element method. The micro-scale problem was solved for a representative volume element (RVE). This micro-model accounted for the residual stress, a material model of the TiN coating, the stress results under loading pressures, the thickness of the TiN coating and the wave parameters of the TiN surface. The numerical results (displacements and strains) were experimentally validated using digital image correlation (DIC) during static blood pressure deformations. The maximum strain and stress were determined at static pressure steps in a macro-scale FE simulation. The strain and stress were also computed at the same loading conditions in a micro-scale FE simulation.

• 한국인구학
• /
• 제11권1호
• /
• pp.97-116
• /
• 1988

This study examines the socioeconomic determinants of fertility behavior in Korea by developing a model which simultaneously takes into account both individual and community-level differences. It especially focuses on the micro-macro nexus of fertility behavior depending on social contexts. This study utilizes micro data obtained from the 1974 Korean National Fertility Survey(KNFS), and macro data obtained from Korean government statistics. The framework of the model is formalized as a set of structural equations modelling the fertility process. The model is formed on a cohort-specific processual basis and is restricted to five-year birth cohorts. Three cohorts of women are studied : those aged 30-34, 35-39, and 40-44. The model includes three fertility-process components : age at first birth, early fertility, and later fertility, which are defined by reference to the age of the mother. The results of this study indicate that socioeconomic development in Korea results in increased age at first birth and reduced numbers of children per couple. In addition to the developmental change, Korea's fertility decline is found to be facilitated by family planning programs. As expected, the effect of family planning on fertility is greater among better-educated women than among poorly educated women. The inconsistent but suggestive result, however, is that the effect of socioeconomic development on fertility is greater among less-privileged women than among more-previleged women.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권12호
• /
• pp.363-370
• /
• 2021

This study aims to revisit the issues and misconceptions about financial inclusion (FI) indices. For indices construction, this study uses two approaches: one approach following the methodology of Sarma (2008) which is based on UNDP methodology, while the other is the Dynamic Factor Model (DFM)-based index of Stock and Watson (2002) and Rehman et al. (2021). The data of 18 economies of Asia from 1997 till 2017 is used for indices construction and analysis. The authors constructed macro and micro-level financial inclusion indices based on the different types of financial inclusion indicators. Second, the authors have critically evaluated two different approaches, and the results show that Sarma (2008)-based index show financial inclusion's level, while DFM-based index reveal fluctuation in the current year's financial inclusion level due to the prior variations. For measuring the level of financial inclusion, the Sarma (2008) index is effective, while for forecasting the level of financial inclusion, the DFM approach is more appropriate. Furthermore, the micro and macro aspects of financial inclusion should be reflected in separate indices for better understanding and in-depth insights.

• Computers and Concrete
• /
• 제27권4호
• /
• pp.385-393
• /
• 2021

Reinforcement corrosion is the main cause of the durability failure of reinforced concrete (RC) structure. In this paper, a three-dimensional (3D) numerical model of macro-cell corrosion is established to reveal the corrosion mechanisms of steel reinforcement in RC structure. Modified Direct Iteration Method (MDIM) is employed to solve the system of partial differential equations for reinforcement corrosion. Through the sensitivity analysis of electrochemical parameters, it is found that the average corrosion current density is more sensitive to the change of cathodic Tafel slope and anodic equilibrium potential, compared with the other electrochemical parameters. Furthermore, both the anode-to-cathode (A/C) ratio and the anodic length have significant influences on the average corrosion current density, especially when A/C ratio is less than 0.5 and anodic length is less than 35 mm. More importantly, it is demonstrated that the corrosion rate of semi-circumferential corrosion is much larger than that of circumferential corrosion for the same A/C ratio value. The simulation results can give a unique insight into understanding the detailed electrochemical corrosion processes of steel reinforcement in RC structure for application in service life prediction of RC structures in actual civil engineer.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권3호
• /
• pp.1417-1425
• /
• 2021

The purpose of this study is to map mineral and coal (Minerba) policies by analyzing the law and producing research novelty on mineral and coal governance policies in Indonesia with the Theory U approach. This study uses a qualitative research with the U theory approach. The results of the SNA analysis indicate that good mineral and coal governance must be carried out at various levels, from micro to macro. First, related to regulations on mineral and coal governance at the macro level. Regulations regarding the management of mineral and coal need to be carried out with a deeper evaluation related to the tax system, licensing system, increased value added and downstreaming and mineral and coal funds. The second is related to the regulation of mining management in the meso level. Third, related to the management of mineral and coal at the micro level, it is necessary to conduct more stringent supervision of the impacts caused by the mining sector of the Minerba. In addition, surveillance is also carried out as per law in order to avoid harmful behavior for both the company and the state. The originality of this research is the theory of U in the Mining Law research.

• East Asian Economic Review
• /
• 제26권4호
• /
• pp.305-336
• /
• 2022

This study applied the macro-micro simulation model (i.e., what-if analysis) to investigate the impact of transport related to the Belt and Road Initiative (BRI) on poverty and income inequality in Laos. We selected Laos as a case study of a developing country. We used the standard GTAP model with the GTAP database (version 10) for the macrosimulation, whereas we used the household model with the latest Lao household data from 2019 for the microsimulation. Our findings revealed that the output of the Lao economy was anticipated to increase by up to 0.3%, while the poverty rate was anticipated to decline from 17.0% to 15.7%. However, there would be winners and losers in industries and groups of households in different areas. In particular, rich households with a comparative socioeconomic advantage, such as in education, engagement in nonfarm business, and infrastructure access, would mostly gain benefits; consequently, this would lead to higher inequality in Laos. Therefore, the inequality index (i.e., the Gini coefficient) would increase from 41.2 to 60.1. After a simulation of BRI transport, we also found that some nonpoor households, which are mainly associated with farm activities and lower educational levels, would fall into poverty.