• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.4
• /
• pp.57-63
• /
• 2003

Machining information such as form accuracy and surface roughness is an important factor for manufacturing precise parts. To this regard, OMM (On the Machine Measurement) has been researched for last several decades to alternate CMM (Coordinate Measurement Machine) process. In this research, the OMM system with a laser displacement sensor was developed for measuring form accuracy and surface roughness of the machined workpiece on the machine tool. The surface roughness was estimated comparing the sensory signal with the reference data measured from master specimen. Also, form accuracy was determined from the moving averaged raw data. In addition, the geometric error map constructed beforehand using the geometric errors of the machine tool was used to compensate the obtained form accuracy. The overall performance was compared with CMM result, and verified the feasibility of the measurement system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.262-273
• /
• 1995

For rotating machinery with high speed and high efficiency, large labor and high expenses are required to conduct machine health monitoring. Therefore, it becomes necessary to develop new diagnosis technique which can detect abnormalities of the rotating machinery effectively. In this paper, it is identified that bispectrum analysis technique can be successfully applied to dectect the abnormalities of the roating machinery through computer simulation, and results of the bispectrum analysis are patterned in griding form. Further, pattern recognition technique using back propagation algorithm, which is one of neural network algorithm, being consisted of patterned input layer and output layer for abnormal status, is applied to detect the abnormalities of simulator which is able to make up various kinds of abnorml conditions(misalignment, unbalance, rubbing etc.) of the rotating machinery.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1126-1127
• /
• 2006

Being controlled by a pole placement, levitation system should need many sensors such as measure air-gap, velocity, acceleration, and so on. However, these sensors have observational errors by changed temperature. This paper proposed a output compensated command tracking controller for reducing the error and reducing sensors. Simulation results will be provided to show the validity of the proposed scheme.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.681-682
• /
• 2006

This paper deals with the preliminary study on the HTSC levitation magnet for MAGLEV operating in persistent current mode (PCM). The high temperature superconducting (HTSC) levitation magnet consists of two single-pancake type coils wound with Bi-2223 wire and a persistent current switch (PCS). The levitation magnet was designed by using 3-D finite element analysis. The suspension system for high-speed electrodynamic suspension (EDS) maglev should operated in persistent current mode. It is important to develop a technology to minimize the joint resistance of splice between two HTSC wires. The PCS was observed with respect to various magnitude of charging current. Based on these results, the levitation system using HTSC wire will be further studied.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.246-248
• /
• 1994

This paper describes a bidirectional Voltage Source PWM Converter for an elevator. From the study of boost rectifier, the control circuit desisted by full digital DSP technique. The characteristic of control circuit is that implements of space-vector PWM method and has feedback loop of DC side load current which reduce DC voltage flucturation.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.226-228
• /
• 1994

In this paper, a moving iron core type LOA is designed and analyzed electro-magnetically and is applied to the active control of structural vibration as an active mass driver. Structural vibration is sensored by the accelerometer attached the structure and reduced by the optimally controlled motion of active mass of LOA giving anti-phase inertia farce to the structure. As a result, the basement of the application of LOA as an active mass driver is successfully established.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.2
• /
• pp.28-33
• /
• 2003

This study is performed to evaluate and design the dynamic characteristics of the onboard machinery with resilient mounts. To avoid resonance with onboard machinery and external force, it is necessary to calculate natural frequencies of the resilient mounting system more accurately. Natural frequencies of on board machinery are determined by rigid body properties(mass, moment of inertia, center of mass) of machinery and stiffness of mounts. But it is very difficult to calculate rigid body properties theoretically. And stiffness properties of rubber mounts vary with dynamic displacement, pre load, frequency and temperature, and so on. In this study, we have identified rigid body properties using experimental modal analysis and estimated dynamic stiffness of rubber mount for onboard machinery using measured vibration response during seatrial. We measured displacement excitation through deck under mounts and evaluated relationship between modes of resilient mounting system and main excitation sources of a ship.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.317-323
• /
• 1999

The necessity of diagnosis of the rotating machinery which is widely used in the industry is increasing. Many research has been conducted to manipulate field vibration signal data for diagnosing the fault of designated machinery. As the pattern recognition tool of that signal, neural network which use usually back-propagation algorithm was used in the diagnosis of rotating machinery. In this paper, self-organizing feature map(SOFM) which is unsupervised learning algorithm is used in the abnormal vibration diagnosis of rotating machinery and then learning vector quantization(LVQ) which is supervised teaming algorithm is used to improve the quality of the classifier decision regions.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.1
• /
• pp.75-84
• /
• 2016

Fluid-dynamic design of fluid machinery had heavily relied on empiricism and experimental observations for many years. Since 1980s, thanks to the advancements in Computational Fluid Dynamics (CFD), a variety of flow physics have been revealed. The contribution by CFD is indispensable; however, the challenge is required not only on the advancements in CFD technologies but also innovation of "design (optimization) technologies" because of the complex interactions between 3-D flow fields and the complex 3-D flow passage configurations, etc. This paper presents historical perspective on fluid machinery flow optimization in an industry with some messages for the future.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.94-96
• /
• 2009

This paper deals with the design considerations of electro-magnet (EM)-permanent magnet (PM) hybrid levitation and propulsion device for magnetically levitated (maglev) vehicles. Several design considerations such as machine structure, manufacturing, and control strategy are described. In order to verify the design scheme and feasibility of control strategy, dynamic test set is implemented and tested.