• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.166-170
• /
• 2003

Contouring errors are important especially for high speed and precision machining. In this study, contouring errors along contours having inflection points are studied. When a table of a machine tool moves along a circular path, acceleration acts toward the center of the circle. Thus, at inflection points, acceleration as well as inertia force changes its direction abruptly. The effect of inertia force on the contouring error is investigated in this study. It is found that the contouring error at an inflection point is proportional to the acceleration. This result can be useful in determining contouring errors along general paths.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.1-7
• /
• 2006

A method of the volumetric error measurement and calibration of NC machine tools is studied using an artifact method. In this study, a hole-pate is designed and machined using stainless steel. We tested and applied the hole-plate artifact in a commercial CMM(Coordinate Measuring Machine), after calibration of the hole-plate using a precise CMM. It has been shown that not only the measurement of geometric error components but also the 2D length error calculation in a working volume is available using the hole-pate artifact method. The results of study can also be used in NC machine with touch probe as the same method in CMM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.375-378
• /
• 1995

Although laser interferometer measurement system has the advantage of range and accuracy, the traditional error measurement methods for geometric errors(two straightness and three angular errors) of a machine tool measures error components one at a time. It may also create an optical path difference and affect the measurement accuracy. In order to identify and compensate for geometric error of a moving body, an on-line measurement system for simultaneous detection of the five error components of a moving axis is required. An on-line measurement system with 5 degrees of freedom was developed for geometric error detection. Performance verification of the system was performed on an error generating mechanism. Experimental results show the feasibility of this system for identifying geometric errors of a side of machine tool.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.64-69
• /
• 2004

The work presented here deals with controller design using error model constructed with proportional control ramp response. The design aims at the improvement of transient response, steady-state error reduction with stability preservation, generation of the consistent contour error through the proportional gain regulation of a mismatched system. The first step is to generate tracking-error curve with proportional control only and decide the added error signal shape on the error curve. The next is to construct a table for the steady-state loop gain with step input. The table is used for selecting the proportional gain. The effectiveness of the proposed controller is confirmed through the simulation and experiment.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.143-148
• /
• 2001

Volumetric error measurement and calibration of a coordinate measuring machine are studied by using a Ball-Bar artifact. Examples of the Ball-Bar design are shown using inbar materials and precision steel balls. Also, for the uncertainty error using the Ball-Bar is discussed. Method of Ball-Bar artifact and the analysis of the error vectors are proposed. Using the Ball-Bar data, we studied the method of volumetric errors ana]ysis of a coordinate measuring machine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.336-342
• /
• 1994

This paper presents an useful technique for assessing the volumetric error in multi_axis machine tools using the kinematic double ball bar and 3 dimensional spherical contouring. The developed system proposes the 3 dimensional spherical contour for the error analysis. The developed system input the measured radial data, analysing the volumetric errors such as positional, strightness, angle, and squareness errors, etc. The developed system has been tested in a practical machine tool, and showed high

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.43-51
• /
• 2004

A method for form error prediction in side wall machining with a flat end mill is suggested. Form error is predicted directly from the tool deflection without surface generation by cutting edge locus with time simulation. Developed model can predict the surface form error about three hundred times faster than the previous method. Cutting forces and tool deflection are calculated considering tool geometry, tool setting error and machine tool stiffness. The characteristics and the difference of generated surface shape in up milling and down milling are discussed. The usefulness of the presented method is verified from a set of experiments under various cutting conditions generally used in die and mold manufacturing. This study contributes to real time surface shape estimation and cutting process planning for the improvement of form accuracy.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.45-51
• /
• 2003

Milling process has beer used in aircraft, auto-component and mold industries widely. They need more accurate and precise parts to improve the performance and quality of their products. So, the geometrical form accuracy of the workpiece surface generated by this process is getting more and more important. Generally, the form accuracy is affected by machine conditions, cutting conditions, tool geometry, tool deflection by cutting force and tool path md so on. Even though they are controlled as perfect conditions, it is easily found that there is a line along the axis of a cylindrically milled part. It is presumed that the tool approaching causes this error on milled surface. Thus, the study for investigating the effect of the tool approaching path on the cylindrical surface geometry of the end-milled part is carried out.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.92-97
• /
• 2001

The major faults of CNC machine tool is operational error which is charge over 70%. This paper describes model of remote service and fault diagnosis for CNC machine tool with open architecture controller. For intelligent fault diagnosis, new model is proposed. In this paper, the three major operational faults, emergency stop error, cycle start disable and machine ready disable, are defined. Two diagnostic models based on the ladder diagram, switching function model, step switching function model, are proposed. For internet based remote service, suitable environment is proposed and implemented with web server and client.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.283-286
• /
• 2002

This paper presents the straightness compensation system which is a device for improving the machining accuracy of ultra-precision machines by synchronizing the position of diamond tool tip with machine error motion. Sine it is actuated by piezoelectric actuator with highly nonlinear hysteresis characteristics, the feedback control schemes such as Proportional Integral(PI), are required and realized by measuring the displacements of diamond tool tip. for the better tracking performance, the controller was implemented using TMS320C32 32bit floating-point DSP which is fast so that the real-time control is possible. In addition, stand alone type DSP board was chosen fur the easy assembly into the ultra-precision machines. The experimental results show good command tracking performance and the motion error of the machine is satisfactorily compensated during the machining process.