• 한국측량학회지
• /
• 제9권2호
• /
• pp.73-80
• /
• 1991

형상이 복잡한 정밀기계 부품은 설계시의 선형과 제작후의 선형에 대한 검증이 필수적이므로 정밀계측에 의한 신뢰성 있는 monitoring은 중요한 의미를 지니고 있다. 본 연구에서는 plumb line method로 왜곡보정한 비측량용 사친기로 정밀기계 부품인 스크류우에 대해 초근접 사진 측량을 실시하여 tortion, offset, section, thickness 등의 3차원적 변화를 정밀 해석하였다. 연구결과 비측량용 사진기에 의한 정밀기계 부품의 monitoring을 효율적으로 실시할 수 있었으며, 이의 적용 가능성을 제시할 수 있었다.

• 한국CDE학회논문집
• /
• 제5권4호
• /
• pp.327-335
• /
• 2000

The spent fuel rod extracting machine is automatically operated in high radioactive environment, so high reliability of operation is required. In this paper, to enhance the reliability of this machine by providing a close monitoring capability. a real time graphic simulation method is suggested. This method utilizes conventional IGRIP (Interactive Graphics Robot Instruction Program) 3D graphic simulation tool to visualize and simulate the 3D graphic model of this machine. Also, the dedicated protocol is defined for transmission of the operational data of the machine. The real time graphic simulation is realized by developing the socket module between a graphic workstation and a machine control computer through the TCP/IP network and by dividing the 3D graphic simulation GSL(Graphic Simulation Language) program as a small sized sub routine. The suggested method is implemented while automatically operating the rod extracting machine. The result of implementation shows that the real time 3D graphic simulation is well synchronized with the actual machine according to the operational data.

• 산업경영시스템학회지
• /
• 제17권30호
• /
• pp.107-116
• /
• 1994

This paper formulates a dynamic monitoring and control model with a machine state by quality variations in a single lot production system. A monitoring model is based on estimate of machine state obtained using control theory. The model studied in this paper has a great advance from a point of view the combination between quality control (Sampling, Control Chart) and automatic control theory, and can be extended in a several ways.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.480-485
• /
• 2013

Enhancing energy efficiency of machine tools causes substantial impacts on the manufacturing industries, to cope with the competitive introduction of the total energy management strategies. Real-time energy monitoring is essential to identify energy consumption patterns of the machine tools and correlate them with the energy management strategy. Integrated analysis of machine tool's operation status and the corresponding energy usage is most important to accurately evaluate the energy efficiency under the various machining process environments. This paper proposes a system architecture to realize the online energy monitoring system and the embedded energy monitoring approach interconnected with the CNC kernel. The shop-floor operation management system is presented to integrate the proposed online energy monitoring approach.

• 한국안전학회지
• /
• 제33권6호
• /
• pp.42-49
• /
• 2018

In this study, we have developed a prediction model for expansion and contraction behaviors of expansion joint in Gwangan Bridge using machine learning techniques and bridge monitoring data. In the development of the prediction model, two famous machine learning techniques, multiple regression analysis (MRA) and artificial neural network (ANN), were employed. Structural monitoring data obtained from bridge monitoring system of Gwangan Bridge were used to train and validate the developed models. From the results, it was found that the expansion and contraction behaviors predicted by the developed models are matched well with actual expansion and contraction behaviors of Gwangan Bridge. Therefore, it can be concluded that both MRA and ANN models can be used to predict the expansion and contraction behaviors of Gwangan Bridge without actual measurements of those behaviors.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.338-342
• /
• 2003

Hybrid machine is based on hardware technologies of machine tool and software technologies of open architecture controller. In machining technology, combination technology of turning, milling, and grinding and in machining energy technology. combination of mechanical, electrical, and chemical technology are developed. This paper describes hybrid machine technology for combination of machining, on-machine measurement, on-machine CAM, and on-machine remote monitoring and control in open architecture controller environment. For on-machine measurement, non-contact measurement technology based on CAD information is developed. For on-machine CAM, interactive CAM program for automatic NC program generation and tool path simulation is developed. For generation on-machine remote monitoring and control, suitable interface method between web program and CNC is proposed. The developed hybrid machine technology is implemented in 3 axes milling machine for evaluation of operablity.

• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.231-237
• /
• 2018

A significant data problem is encountered with condition monitoring because the sensors need to measure vibration data at a continuous and sometimes high sampling rate. In this study, compressive sensing approaches for condition monitoring are proposed to demonstrate their efficiency in handling a large amount of data and to improve the damage detection capability of the current condition monitoring process. Compressive sensing is a novel sensing/sampling paradigm that takes much fewer data than traditional data sampling methods. This sensing paradigm is applied to condition monitoring with an improved machine learning algorithm in this study. For the experiments, a built-in rotating system was used, and all data were compressively sampled to obtain compressed data. The optimal signal features were then selected without the signal reconstruction process. For damage classification, we used the Variance Considered Machine, utilizing only the compressed data. The experimental results show that the proposed compressive sensing method could effectively improve the data processing speed and the accuracy of condition monitoring of rotating systems.

• Tribology and Lubricants
• /
• 제18권2호
• /
• pp.117-126
• /
• 2002

Abstract - An integrated condition monitoring algorithm based on an expert system was implemented in this work in order to monitor effectively the machine conditions. The knowledge base was consisted of numeric data which meant the posterior probability of each measurement parameter for the representative machine failures. Also the inference engine was constructed as a series of statistical process, where the probable machine fault was inferred by a mapping technology of pattern recognition. The proposed algorithm was, through the user interface, applied for an air compressor system where the temperature, vibration and wear properties were measured simultaneously. The result of the case study was found fairly satisfactory in the diagnosis of the machine condition since the predicted result was well correlated to the machine fault occurred.

• 인터넷정보학회논문지
• /
• 제14권6호
• /
• pp.19-23
• /
• 2013

본 논문은 인터넷을 이용한 원격 기계상태 모니터링 시스템을 구현하고 실험하였다. 인터넷을 이용한 원격 기계상태 모니터링 시스템은 일반 회사에서 많은 비용과 인력이 소모되는 것을 효율적으로 관리할 수 있어 비용과 시간이 절약되는 장점이 있다. 본 논문에서는 기계상태 모니터링을 위한 프로토콜과 응용 프로그램 및 기계상태 측정 단말기를 개발하여 실험하고 그 결과에 대해 논의한다. 본 연구는 향 후 인터넷 원격 기계상태 모니터링 시스템에 대한 발전에 기여 할 것으로 생각된다. 마지막으로 본 논문에서 제안한 시스템이 실험을 통해 좋은 성능을 보여 주었고 또한 상용화의 가능성을 제시해 주었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.564-567
• /
• 2005

For the application of monitoring system of the machine tool to industry, the requirements such as high reliability and low cost need to be satisfied. In this study, a reliable but inexpensive monitoring method for machine tool is introduced. To improve the monitoring reliability, several kinds of information related to machining and operation are selected; real-time video clip from USB camera, operation data and signal from CNC and feed motor torque. Especially, to improve the quality of real-time video clip, a camera housing is developed, it can significantly reduce the vibration effect and prevent from coolant and chip. The collected information are transferred to the monitoring terminals in remote sites using OPC and TCP/IP protocol over Ethernet, which give us convenience of development and interoperability.