• 제목/요약/키워드: Mach Wave

검색결과 269건 처리시간 0.021초

초음속 환형동축 자유 제트유동에 관한 실험적 연구 (보조제트 압력비 영향에 관하여) (The Experimental Study of Supersonic, Dual, Coaxial, Free, Jets (The effects of the assistant jet pressure ratio))

  • 이권희;이준희;김희동
    • 한국추진공학회지
    • /
    • 제5권2호
    • /
    • pp.51-58
    • /
    • 2001
  • 본 연구에서는 이중동축노즐로부터 대기로 방출되는 초음속 자유제트유동을 실험하였다. 출구마하 수가 2.0이고 충돌각이 다른 축소확대노즐 및 출구마하수가 1.0이고 충돌각이 다른 축소노즐을 사용하고, 주제트 압력비와 보조제트 압력비를 각자 4.0∼10.0, 1.0∼4.0으로 변화시켜 가면서 자유제트 유동장 특성을 조사하였다. 본 연구의 결과로부터 보조제트 압력비가 동축자유제트유동 특성에 영향을 미치며, 주제트 및 보조제트 압력비가 증가할수록 동축제트의 초음속 길이도 증가한다는 것을 알았다.

  • PDF

세장비 변화에 따른 3차원 공동 주위의 난류유동 및 음향 특성에 관한 수치적 연구 (NUMERICAL ANALYSIS FOR TURBULENT FLOW OVER A THREE DIMENSIONAL CAVITY WITH LARGE ASPECT RATION)

  • 문바울;김재소
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2009년 추계학술대회논문집
    • /
    • pp.13-18
    • /
    • 2009
  • Flight vehicles such as wheel wells and bomb bays have many cavities. The flow around a cavity is characterized as an unsteady flow because of the formation and dissipation of vortices brought about by the interaction between the free stream shear layer and the internal flow of the cavity. The resonance phenomena can damage the structures around the cavity and negatively affect the aerodynamic performance and stability of the vehicle. In this study, a numerical analysis was performed for the cavity flows using the unsteady compressible three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equation with Wilcox's turbulence model. The Message Passing Interface (MPI) parallelized code was used for the calculations by PC-cluster. The cavity has aspect ratios (L/D) of 2.5 ~ 7.5 with width ratios (W/D) of 2 ~ 4. The Mach and Reynolds numbers are 0.4 ~ 0.6 and $1.6{\times}106$, respectively. The occurrence of oscillation is observed in the "shear layer and transient mode" with a feedback mechanism. Based on the Sound Pressure Level (SPL) analysis of the pressure variation at the cavity trailing edge, the dominant frequencies are analyzed and compared with the results of Rossiter's formula. The dominant frequencies are very similar to the result of Rossiter's formula and other experimental data in the low aspect ratio cavity (L/D = ~ 4.5). In the large aspect ratio cavity, however, there are other low dominant frequencies due to the leading edge shear layer with the dominant frequencies of the feedback mechanism. The characteristics of the acoustic wave propagation are analyzed using the Correlation of Pressure Distribution (CPD).

  • PDF

축대칭 초음속 흡입구의 아임계 불안정성 연구 (A Study on Subcritical Instability of Axisymmetric Supersonic inlet)

  • 신필권;박종호
    • 한국항공우주학회지
    • /
    • 제32권8호
    • /
    • pp.29-36
    • /
    • 2004
  • 초음속 흡입구 buzz는 입구에서의 충격파 패턴의 진동과 내부압력요동을 동반하는 불안정한 아임계 작동으로 정의할 수 있다. 이러한 유동섭동은 연소실 실화나 엔진의 구조직 손상을 일으킬 수 있다. 축대칭, 외부 압축형 흡입구에서 초음속 흡입구의 buzz 현상을 조사하기 위한 실험적 연구가 수행되었다. 자유류 마하수 2.0에서 카울 입구 직경이 30mm인 흡입구 모델이 시험되었다. 아임계 불안정성은 압력섭동의 주파수 및 입구에서의 충격파 구조 분석을 통해 조사되었다. 실험결과 전압럭 회복비는 0.42에서 0.78까지, 포획 면적 비는 0.34에서 0.98까지 변화했다. 아임계 유동의 주파수는 포획 면적비 감소에 따라 증가했으며 주파수는 범위는 $224{\sim}240Hz$였다.

낮은 작동 압력비의 초음속 제트에 대한 실험적 연구 (Experimental Study on the Supersonic Jets at Low Operating Pressure Ratio)

  • 이재혁;;김태호;김희동
    • 대한기계학회논문집B
    • /
    • 제41권7호
    • /
    • pp.489-495
    • /
    • 2017
  • 본 연구에서는 초음속 노즐로부터 방출되는 초음속 제트유동의 정량적 가시화 실험 연구가 이루어졌다. 최근 카메라와 가시화 장비의 발달로 비압축성 유동뿐 아니라 압축성 유동 조건에서도 가시화 실험이 가능해졌다. 본 연구의 실험은 노즐 압력비 $p_0/p_b=4$, 5, 6, 7에 대해 $M_d=1.5$, 1.8인 축소확대 노즐에서 방출되는 음속 및 초음속 제트에 대해 PIV와 쉴리렌 가시화 실험을 수행하였다. PIV는 제트 유동장의 정량적 정보를 제공하며, 컬러 쉴리렌 기법과 동일한 실험조건을 적용하였다. 정량적 결과는 쉴리렌 결과와 비교하였으며, 쉴리렌의 제트는 이론적 해석과 비교하였다. 특히, 노즐 출구부근에서 발생하는 유동의 팽창 상태에 따라 달라지는 유동특성을 자세히 조사하였다.

KAIST 비정렬격자 기반 CFD 해석자를 이용한 CFD-EFD 상호 비교 검증 (CFD-EFD Mutual Validation Using a CFD Solver Based on Unstructured Meshes Developed at KAIST)

  • 정성문;한재성;권오준
    • 한국항공우주학회지
    • /
    • 제45권3호
    • /
    • pp.259-267
    • /
    • 2017
  • 본 연구에서는 카이스트에서 개발된 비정렬격자 기반의 유동 해석자를 이용하여 KARI-11-180 익형, SDM과 천음속 비행체 주변 유동장에 대한 수치해석을 수행하였다. 유동장을 해석하기 위하여 RANS가 수치적으로 풀이되었으며, Roe가 제안한 FDS 방법을 사용하여 비점성 플럭스를 계산하였다. 난류 모델은 SA 모델, SST 모델, ${\gamma}-{\widetilde{Re}}_{{\theta}t}$모델이 사용되었다. KARI-11-180 익형 유동 해석 결과 천이현상을 고려하였을 때 항력 계수가 더 작게 예측되었으며, 계산된 공력 특성은 전반적으로 실험 결과와 잘 일치하였다. SDM의 경우 날개 앞전에서 유동 박리현상이 발생하였으며, 계산된 공력 특성이 EFD 결과와 유사한 경향을 보였다. 천음속 비행체의 경우 자유류 마하수가 0.9일 때 주 날개에서 발생하는 충격파를 성공적으로 포착하였으며, 실험 결과와 해석된 결과 사이의 유사성을 확인하였다.

음속 및 초음속 노즐을 통한 Gas-Solid Suspension 유동에 대한 해석적 연구 (Analytical Study on the Gas-Solid Suspension Flows through Sonic and Supersonic Nozzles)

  • ;;김희동
    • 한국추진공학회지
    • /
    • 제17권1호
    • /
    • pp.9-17
    • /
    • 2013
  • Gas-solid suspension 유동에서의 입자운동과 그 운동이 유동장에 미치는 영향을 명시하고, 이 유동에 대한 이해를 얻기 위해 많은 연구가 수행 되어 왔다. 본 논문에서는 gas-solid suspension 유동에 대한 노즐의 입구/출구 압력비, 입자/기체 부하, 입자의 직경에 따른 영향 등을 연구하기 위한 분석적 모델을 개발 하였다. 노즐을 통한 유량, Mach수, 추력계수 및 정압 변화에 대한 입자/기체 부하의 영향을 분석하였다. 그 결과로부터 입자의 존재로 인해 충격파의 강도가 줄어드는 것으로 판단되며, 입자직경이 커질수록 속도는 작아지고, slip velocity는 커지게 될 것이다. 또한, 더 작은 직경의 입자에 대한 suspension 유동은 이상기체에 대한 단상유동의 결과와 같은 경향이 나타나며, 주위 압력에 따라 더 큰 입자/기체 부하나 배압비에 대한 추력계수가 더 크게 나타났다.

PIV 기법을 이용한 초음속 평판 경계층의 속도 분포 측정 (Velocity profile measurement of supersonic boundary layer over a flat plate using the PIV technique)

  • 이혁;김영주;변영환;박수형
    • 한국항공우주학회지
    • /
    • 제44권6호
    • /
    • pp.477-483
    • /
    • 2016
  • 본 연구는 Particle Image Velocimetry(PIV) 기법을 이용하여 마하수 2.96의 평판에 대해 층류, 천이, 난류 경계층의 속도 분포를 측정하였다. Schlieren 가시화 기법과 PIV 기법을 이용하여 앞전에서 발생한 경사 충격파가 평판 위의 유동장에 영향을 주는지 확인하였다. 층류 경계층의 경우, 실험에서 측정한 속도 분포가 압축성 Blasius 속도 분포를 만족하였다. 천이 경계층의 속도 분포는 벽면 부근부터 이론적인 난류 속도 분포로 변했으며, Re = $1.41{\times}10^6$에서 천이가 시작되었다. 난류 경계층 영역에서는 압축성 효과를 고려한 Van Driest 변환 속도가 비압축성 로그 법칙을 만족하였다. 또한 로그 구간이 끝나는 위치($y/{\delta}{\approx}0.28$)가 비압축성 난류 경계층($y/{\delta}{\approx}0.2$)에 비해 벽면에서 더 멀어진 것을 확인하였다.

인공위성용 축대칭 소형 추력기의 압축성 유동 구조 계산에 의한 연속체 가정의 적용 한계 (The Limit of the Continuum Assumption Based on Compressible Flow Structures in an Axisymmetric Micro-Thruster Used for a Satellite)

  • 권순덕;김성초;김정수;최종욱;이기만
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2007년도 제28회 춘계학술대회논문집
    • /
    • pp.281-285
    • /
    • 2007
  • 추력기의 성능 등을 예측하려면 기하학적 모양과 압력비를 고려한 노즐 유동 특성을 해석해야 한다. 이 논문에서는 연속체 역학 역학의 가정이 성립하는 한계를 파악하기 위해서 인공위성 자세 제어용으로 사용되는 실제 축대칭 노즐에서의 유동을 계산하였다. 유동은 정상 상태의 비반응 압축성 유동이고 비정렬 격자계를 사용하였다. 추력기의 면적비는 56이고 주위 압력의 진공도를 변경하면서 해석하였는데 그 압력이 $10^{-3}$ 기압 이하가 되면 연속체 역학은 더 이상 타당하지 않게 된다.

  • PDF

Influence of the Mars atmosphere model on aerodynamics of an entry capsule: Part II

  • Zuppardi, Gennaro
    • Advances in aircraft and spacecraft science
    • /
    • 제7권3호
    • /
    • pp.229-249
    • /
    • 2020
  • This paper is the logical follow-up of four papers by the author on the subject "aerodynamics in Mars atmosphere". The aim of the papers was to evaluate the influence of two Mars atmosphere models (NASA Glenn and GRAM-2001) on aerodynamics of a capsule (Pathfinder) entering the Mars atmosphere and also to verify the feasibility of evaluating experimentally the ambient density and the ambient pressure by means of the methods by McLaughlin and Cassanto respectively, therefore to correct the values provided by the models. The study was carried out computationally by means of: i) a code integrating the equations of dynamics of an entry capsule for the computation of the trajectories, ii) two Direct Simulation Monte Carlo (DSMC) codes for the solution of the 2-D, axial-symmetric and 3-D flow fields around the capsule in the altitude interval 50-100 km. The computations verified that the entry trajectories of Pathfinder from the two models, in terms of the Mach, Reynolds and Knudsen numbers, were very different. The aim of the present paper is to continue this study, considering other aerodynamic problems and then to provide a contribution to a long series of papers on the subject "aerodynamics in Mars atmosphere". More specifically, the present paper evaluated and quantified the effects from the two models of: i) chemical reactions on aerodynamic quantities in the shock layer, ii) surface temperature, therefore of the contribution of the re-emitted molecules, on local (pressure, skin friction, etc.) and on global (drag) quantities, iii) surface recombination reactions (catalyticity) on heat flux. The results verified that the models heavily influence the flow field (as per the shock wave structure) but, apart from the surface recombination reactions, the effects of the different conditions on aerodynamics of the capsule are negligible for both models and confirmed what already found in the previous paper that, because of the higher values of density from the NASA Glenn model, the effects on aerodynamics of a entry capsule are stronger than those computed by the GRAM-2001 model.