• 한국식품저장유통학회지
• /
• 제11권4호
• /
• pp.496-502
• /
• 2004

도토리 가루를 알칼리로 침전시키면서 정제하여 도토리 전분을 얻었다. 다시 이 starch를 부탄올 개량법으로 분획하여 도토리 amylose와 amylopectin을 얻었고 Corn starch와 corn amylose, corn amylopectin은 시판되는 시약을 사용하였다. 이 시료들의 분자량 분포도를 관찰하기 위하여 GCP측정을 하였다. GCP측정은 DMSO와 DMF의 용매사용과 표준물질로 pullulan을 사용하여 검정하고 각 시료들의 지연시간으로부터 행하여졌다. 분자량분포도로부터 수평균분자량 (Mn)과 중량평균분자량(Mw) 및 다 분산도를 얻었다. 그 결과 acorn amylose와 corn amylose의 중량평균 분자량이 amylopectin에 비해서 뚜렷이 작게 나타나 ${\alpha}-1,4$ 선형결합을 갖는 amylose와 ${\alpha}-1,4$ 선형결합에 ${\alpha}-1,6$ 결합가지가 있는 amylopectin의 구조상의 차이를 확인할 수 있었다. 또한 분획한 acorn과 시판되는 corn과의 분자량분포도 측정을 비교한 결과 같은 경향을 나타내어 도토리 전분의 분획이 잘 이루어졌음을 확인하였다. 다분산도는 acorn starch와 corn starch 모두 amylose와 amylopectin에 비해 크게 나타났으며 이는 전분이 분획되기전 두 성분의 불균일성에 의한 성질로 분자량분포 범위가 넓게 나타났음을 알 수 있었다. 또한, 전단속도와 온도에 따르는 점도를 관찰하였더니 전단속도가 증가하면 점도는 감소하는 현상을 나타내는 pseudo plastic power law fluid 거동(13)을 보였으며 온도가 증가하면 점도는 지수 함수적으로 감소하였다.

• 충청수학회지
• /
• 제25권3호
• /
• pp.501-505
• /
• 2012

In this paper, general classes of continuous distributions are characterized by considering the conditional expectations of functions of upper record statistics. The specific distribution considered as a particular case of the general class of distribution are Exponential, Exponential Power(EP), Inverse Weibull, Beta Gumbel, Modified Weibull(MW), Weibull, Pareto, Power, Singh-Maddala, Gumbel, Rayleigh, Gompertz, Extream value 1, Beta of the first kind, Beta of the second kind and Lomax.

• Korean Chemical Engineering Research
• /
• 제59권3호
• /
• pp.417-428
• /
• 2021

낮은 반응성으로 인해 복잡한 공정이 필요한 무연탄은 순환유동층 내의 동적 거동을 통해 연소 특성이 고찰되어야 한다. Pilot 규모의 0.1MW_th 급 순산소 순환유동층 연소로에서의 무연탄 연소 특성을 고찰하기 위하여 본 연구에서는 전산유체해석 기법을 이용하였다. 순산소 순환유동층 보일러는 연소로(0.15 m l.D., 10 m High), 싸이클론, 재순환부 등으로 구성되었고 동일한 크기의 3D 모델 반응기를 구축하였다.실험에 사용한 무연탄은 평균 입도 1,070 ㎛, 밀도 2,326 kg/m³이다. 공기 연소에서 순산소 연소로의 연소 환경 변화에 따른 반응기 내부의 기-고 흐름 패턴을 고찰하였다. 이때, 공기 연소와 순산소 연소에서 온도 분포는 비슷한 양상을 보이지만 압력 분포는 순산소 연소에서 더 낮음을 알 수 있었다. 더불어 공기 연소에 비해 순산소 연소에서 더 높은 CO₂ 농도를 가지므로 이산화탄소 포집이 활발히 이루어질 것을 예상해 볼 수 있다. 결과적으로 본 연구를 통해 무연탄 활용 시 순환유동층 반응기의 최적화된 설계 및 운전에 기여할 수 있음을 확인하였다.

• 분석과학
• /
• 제12권4호
• /
• pp.306-311
• /
• 1999

몇 가지 용해조건에 따른 견 단백절의 조성 변화를 SDS-polyacrylamide 전기영동법, Gel Permeation Chromatography(GPC)법 및 유리아미노산 분석을 통하여 연구하였다. 분자량의 변화에 있어 염산을 이용한 가수분해법의 경우, SDS-PAGE 방법으로는 분자량의 분포를 확인할 수 없었다. 그러나 2N-HCl, 1N-HCl, 0.5N-HCl (3시간 $110^{\circ}C$)와 중성염($CaCl_2$) 및 중성염-효소로 가수분해시킨 견 피브로인 단백질의 평균 분자량 분포는 GPC법에 의하여 각각 Mw 800, 1,500, 3,700과 46,800, 12,500으로 확인되었다. 또한 용해 조건에 의한 유리아미노산 함량은 염산의 농도가 높을수록, 효소를 사용함으로써 유리아미노산의 조성이 증가함을 알 수 있었다.

• 환경위생공학
• /
• 제22권4호
• /
• pp.23-32
• /
• 2007

Changes in the characteristics of dissolved organic matter was studied at selected stations in the Nakdong river basin using physical and chemical methods. Characteristics of dissolved organic matters were analysed and assessed. Production of disinfection byproducts were also investigated. Distribution of the organic compounds according to the Molecular weight(MW) indicate that MWs higher than 100K were highest with cattle excrement wastewater and MW between 100-10K were highest with waters from forest streams. Low MW compounds (Jess than 1K) were highest with the effluents from environmental facilities. Results of resin fractionation study show that acidic hydrophobic substances(AHS) were dominant in many stations. The values were higher in the samples from mainstreams and sidestreams where the influence of organic matter is higher than the water from environmental facilities. Hydrophilic neutral substances(HoN) such as hydrocarbon, pesticides and detergents were higher in the wastewater treatment facilities. HoN values of water from the forest streams were 4.7% indicating there is no synthetic pollutant.

• Macromolecular Research
• /
• 제17권4호
• /
• pp.240-244
• /
• 2009

High molecular weight(MW), 3-arm star poly(methyl methacrylate)(PMMA) with a narrow MW distribution($M_n$=570,000 g/mol, PDI=1.36) was successfully synthesized by activators regenerated by electron transfer(ARGET) atom transfer radical polymerization(ATRP). The polymerization was carried out with a trifunctional initiator/$CuBr_2$/N,N,N',N",N"-pentamethyldiethy lenetriamine(PMDETA) initiator/catalyst system in the presence of a tin(II) 2-ethylhexanoate [$Sn(EH)_2$] reducing agent at $90^{\circ}C$. The concentration of the copper catalyst was as low as 30 ppm, and a high initiation efficiency of the initiating sites was obtained. The chain-end functionality of the high MW, 3-arm star PMMA was confirmed by a chain extension experiment with styrene via ARGET ATRP, using the same catalyst system.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1464-1472
• /
• 1999

Design and operation of $1MW_{th}$ pulverized coal combustion testing facility are described. Also the influence of air staging on NOx emission and burnout of coal flames was investigated in this facility. The test facility consisted of coal feeding system, firing system and flue gas treatment system. A top-fired externally air staging burner was adopted in order to avoid influence of gravity on the coal particles and for easy maintenance. Distribution of temperature and chemical species concentration of coal flames could be measured in vertical pass of furnace. Main fuel was pulverized (83.4% less than $80{\mu}m$) Australian high bituminous coal. From variety of test conditions, overall excess air ratio was selected at 1.2(20% excess air). Tho study showed that increasing the staged air resulted in lower NOx omission, and it was suggested to be more than 40% of the total combustion air for the substantial NOx reduction. Sufficient burnout was not achievable when NOx emission was less than 500ppm. Also, the amount of core air did not influence tho NOx reduction.

• Elastomers and Composites
• /
• 제47권1호
• /
• pp.30-35
• /
• 2012

새로운 스타폴리머인 바이오폴리부타디엔은 리빙 음이온중합이라는 고분자의 정밀 합성법을 통하여 분자량, 분자량분포, 조성 및 세부구조를 제어하였다. 리빙 음이온중합에 의해 n-BuLi으로 개시된 polybutadienyllithium(PBDLi)의 연쇄말단이 ESO(Epoxidized Soybean Oil)의 기능성 그룹과 커플링 반응을 일으키며 스타폴리머를 합성한다. 분자량이 1,000/5,000/10,000(g/mol)인 PBDLi을 중합하여 THF존재하에서 반응 후 GPC에 의한 분자량 및 arms분석과 $^1H$-NMR, FT-IR에 의한 고분자 구조 분석을 통하여 바이오폴리부타디엔의 합성을 확인하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1197-1202
• /
• 2009

Cost allocation on cogeneration is a methodology dividing the input of common cost to electricity cost and heat cost. In the cost allocation methodology of the electricity and heat on a cogeneration, there are energy method, work method, proportional method, benefit distribution method, reversible work method, various exergetic methods, and so on. In previous study, various cost allocation methodologies have been applied and analyzed on a gas-turbine cogeneration producing the 33.1 MW of electricity and the 32.2 Gcal/h of heat, a steam-turbine cogeneration producing the 22.2 MW of electricity and the 44.3 Gcal/h of heat, and combined-cycle cogeneration producing the 314.1 MW of electricity and the 279.4 Gcal/h of heat. In this study, we integrately analyze the results of previous studies and examine the generality and rationality each methodology. Additionally, a new point of view on the values of alternative electricity efficiency and alternative heat efficiency in the previous methodologies was proposed. As the integrated result, we conclude that reversible work method of various common cost allocation methodologies is most rational.

• Archives of Pharmacal Research
• /
• 제26권2호
• /
• pp.173-181
• /
• 2003

A polymeric micelle drug delivery system was developed to enhance the solubility of poorly-water soluble drug, biphenyl dimethyl dicarboxylate, DDB. The block copolymers consisting of poly(D,L-lactide) (PLA) as the hydrophobic segment and methoxy poly(ethylene glycol) (mPEG) as the hydrophilic segment were synthesized and characterized by NMR, DSC and MALDI-TOF mass spectroscopy. The size of the polymeric micelles measured by dynamic light scattering showed a narrow monodisperse size distribution with the average diameter less than 50 nm. The MW of mPEG-PLA, 3000 (MW of mPEG, 2 K; MW of PLA, 1K), and the presence of hydrophilic and hydrophobic segments on the polymeric micelles were confirmed by MALDI-TOF mass spectroscopy and NMR, respectively. Polymeric micelle solutions of DDB were prepared by three different methods, i.e. the matrix method, emulsion method and dialysis method. In the matrix method, DDB solubility was reached to 13.29 mg/mL. The mPEG-PLA 2K-1K micelle system was compared with the poloxamer 407 micelle system for their critical micelle concentration, micelle size, solubilizing capacity, stability in dilution and physical state. DDB loaded-polymeric micelles prepared by the matrix method showed a significantly increased aqueous solubility (＞5000 fold over intrinsic solubility) and were found to be superior to the poloxamer 407 micelles as a drug carrier.