• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.457-463
• /
• 2023

To investigate residual pesticide levels in agricultural products contained in Meal-kits, 27 Meal-kit products were collected from marts, Meal-kit shops, and online stores in Incheon City, South Korea. Seventy-six vegetable and thirty-seven mushroom products were analyzed for residual levels of 339 pesticides. Residual pesticides were detected in 23 out of 76 vegetables and were not present in the 37 mushroom products. The residual pesticide detection rate was 20.4% (23/113 cases). The pesticides famoxadone 0.034 mg/kg (standard: 0.01 mg/kg or less, PLS) and fenpyroximate 0.302 mg/kg (standard: 0.01 mg/kg or less, PLS) exceeded their maximum residue levels (MRL). This survey revealed that various types of pesticides remain in agricultural products in Meal-kits. Due to the nature of Meal-kit products, there is no separate standard for residual pesticides in agricultural products. Therefore, continuous monitoring of residual pesticides is necessary.

• Clean Technology
• /
• v.29 no.4
• /
• pp.288-296
• /
• 2023

Coal is abundantly available compared to other energy sources and is used as a versatile energy resource worldwide. To address the environmental issues stemming from conventional coal utilization, efforts are underway to develop clean coal utilization technologies, with IGCC technology being a notable example. In IGCC plants, coal is subjected to a CMD process where both drying and pulverization are achieved by supplying hot air. However, if the temperature of the supplied hot air is excessively high, it can lead to devolatilization and spontaneous combustion, thereby compromising the stable operation of the CMD process. This study aimed to measure the devolatilization and spontaneous combustion temperatures of different types of bituminous coal, and to explore their correlations with the characteristics of the coals. Six coal types exhibited devolatilization between 350 and 400 ℃, while three coal types showed devolatilization at temperatures exceeding 400 ℃. Spontaneous combustion ℃curred in one coal type below 100 ℃, six coal types between 100 and 150 ℃, and two coal types above 150 ℃. The measured initiation temperatures were compared with the coal characteristics including the oxygen, moisture, Fe₂O₃, and CaO content, the H/C ratio, and the O/C ratio to establish correlations. Regression analysis was used to calculate the regression coefficients and determination coefficients for each ignition temperature. It was found that 52.44% of the FC/VM data significantly influenced the volatile matter ignition temperature, and 59.10% of the Fe₂O₃ data significantly affected the spontaneous combustionignition temperature.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.1
• /
• pp.253-270
• /
• 2023

Research on investment determinants of accelerators, which are attracting attention by greatly improving the survival rate of startups by providing professional incubation and investment to startups at the same time, is gradually expanding. However, previous studies do not have a theoretical basis in developing investment determinants in the early stages, and they use factors of angel investors or venture capital, which are similar investors, and are still in the stage of analyzing importance and priority through empirical research. Therefore, this study verified for the first time in Korea the discrimination and effectiveness of investment determinants using accelerator investment determinants developed based on the business model innovation framework in previous studies. To this end, we first set the criteria for success and failure of startup investment based on scale-up theory and conducted a survey of 22 investment experts from 14 accelerators in Korea, and secured valid data on a total of 97 startups, including 52 successful scale-up startups and 45 failed scale-up startups, were obtained and an independent sample t-test was conducted to verify the mean difference between these two groups by accelerator investment determinants. As a result of the analysis, it was confirmed that the investment determinants of accelerators based on business model innovation framework have considerable discrimination in finding successful startups and making investment decisions. In addition, as a result of analyzing manufacturing-related startups and service-related startups considering the characteristics of innovation by industry, manufacturing-related startups differed in business model, strategy, and dynamic capability factors, while service-related startups differed in dynamic capabilities. This study has great academic implications in that it verified the practical effectiveness of accelerator investment determinants derived based on business model innovation framework for the first time in Korea, and it has high practical value in that it can make effective investments by providing theoretical grounds and detailed information for investment decisions.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.2
• /
• pp.65-80
• /
• 2022

Despite the uncertainty and risky factors of startups, the special and critical role of accelerators in carrying out professional nurturing and investment for them is becoming increasingly significant in the startup social-system. However, academic research on investment determinants that have a profound impact on the survival of accelerators is lacking, and there are only a few empirical studies on the classification and importance of factors, and they do not enjoy the benefits of theoretical studies. This study proposes a business model innovation framework based on the business model innovation theory that reflects the nature and properties of startups that are investment targets of accelerators and derives 12 investment decision factors. The framework defines that the target, direction, and performable force of startup innovation are a business model, strategy, and dynamic capability. Besides, the framework analyzes the investment decision factors of the existing accelerators based on the business model innovation framework to verify the suitability and sufficiency of the composition. As a result of the analysis, first, most of the items were faithfully composed from a static point of view of business model innovation, but it was found that the factors related to the core activities to evaluate the activity and customer relationship were insufficient. Second, from the strategic point of view, the necessity of developing factors that can encompass the definition and content of core resources, which are internal strategic factors, was raised. Third, from the dynamic point of view, it was found that many of the investment determinants of accelerators were concentrated on the lower level of dynamic competencies. This can be judged as a result of reflecting the characteristics of a startup that needs to develop a solution with few resources and a small number of team members. In addition, the roles and interrelationships between each factor are not clear, thus it was found as a limiting point for startups to view and evaluate the direction and process in which startups dynamically innovate their business models. This study is considerably differentiated in that it provides a business model innovation framework and offers a theoretical basis for investment determinants by deriving the investment determinants of accelerators based on the framework and design the foundation for subsequent research. The business model innovation framework presented in this study has great implications in that it contributes to the achievement of startups, accelerators, and startup support organizations.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.5
• /
• pp.1-16
• /
• 2022

Although start-up is a key national strategy to increase national competitiveness and create employment, the survival rate of start-ups has not improved significantly. This is an important reason for the inability to provide timely and appropriate support to startups, which are in the early stages of start-up, due to the unique limitations of existing start-up support institutions and investors. The relatively recent accelerator is attracting attention as a subject of solving the above problems through professional incubation and investment. However, there are only a few empirical studies on investment determinants that affect the survival and success of accelerators, and there is a lack of theoretical evidence. Accordingly, in previous studies, 12 investment determinants were derived from a static, strategic, and dynamic perspective as accelerator investment determinants based on a business model innovation framework. This study subdivided the accelerator investment determinants derived through previous studies into 21 and analyzed the importance and priority of each factor using AHP (Analytic Hierarchy Process) analysis technique for domestic accelerator investment experts. As a result of the analysis, the top factors of importance of accelerator investment determinants were in the order of 'human resources', 'customer and market', 'intellectual resources', and 'entrepreneur's ability to realize opportunities'. It can be seen that the accelerator considers the core competencies of startups to implement solutions as the most important factor when making startup investment decisions. It was also confirmed that accelerators are strategic to create a clear value proposition and differentiated market position based on the core competitiveness of startups, and that the core value delivery method prefers a market-oriented business model and recognizes entrepreneurs's innovation capability is an important factor to realize a business model with limited resources in a rapidly changing market. This study is of academic significance in that it analyzes the importance and priority of accelerator investment determinants through demonstration as a follow-up study on accelerator investment determinants derived based on business model innovation theory that reflects the nature, goals, and major activities of accelerator investment. In addition, it is of practical value as it contributes to revitalizing the domestic startup investment ecosystem by providing accelerators with theoretical grounds for investment decisions and specific information on detailed investment determinants.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.118-127
• /
• 2024

This study investigated the levels of 345 pesticide residues in 50 herbal medicines sold in Incheon metropolitan city to determine their safety. Pesticide residues are harmful substances that can cause serious health problems owing to their toxicity and carcinogenicity. The analysis of pesticide residues in the samples was conducted using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method, known for its high analysis efficiency, to analyze a wide range of pesticides for which no standards have been set. The analysis was cross-validated with the pretreatment method outlined in the Korea Pharmacopoeia. Among the 50 samples encompassing 24 different herbs, 22 pesticide residues were detected in 24 samples, covering 7 distinct herbs, resulting in a detection rate of 48%. It is noteworthy that, except for two cases, all detected pesticides were those for which no standards were set. However, after conducting a risk evaluation considering the daily dosage of herb, it was determined that the levels of pesticide residues were within safe limits. Pesticides with high frequency within the same category of herbs were detected, indicating the necessity for continuous monitoring and regulation. In addition, comparative analysis using the pretreatment method outlined in the Korean Pharmacopoeia, yielded similar results, suggesting the possibility of analyzing pesticide residues in herbs using the QuEChERS method. The study emphasizes the importance of continuous monitoring of pesticide residues in herbs and the development of high-efficiency reliability analysis methods should continue to ensure consumer safety.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.1
• /
• pp.59-65
• /
• 2024

For plasma cosmetics, it is important to ensure the long-term stability of plasma in the formulation. This study examined the suitability of containers for efficient plasma cosmetics development. By varying the surface area covered by the plasma, 4 cm², 25 cm², 75 cm², and 175 cm² containers were injected with cosmetic plasma, and the amount of nitric oxide (NO), the main active species of nitrogen plasma, was analyzed. As a result, the surface area and stability exposed to plasma tended to be inversely proportional, and it was most effective in a 4 cm² container. Furthermore, 25 mm, 40 mm, and 50 mm vials were treated with plasma, which resulted in relative long-term stability of NO at 25 mm, a smaller surface area of the container exposed to air. Water mist and stratified mist were selected as cosmetic formulations, and NO plasma was injected into the water layer to observe the changes in formulation properties and the state of the injected NO plasma. In both formulations, the amount of NO plasma injected was about 1.5 times higher in the water phase mist than in the stratified mist, and the stratified mist gradually decreased with time and was found to disappear after 3 weeks. The stability of the nitrogen plasma was studied at low temperature (4 ℃), room temperature (25 ℃), and high temperature (37 ℃, 50 ℃). As a result, it was found that the water mist did not affect the stability, but the stratified mist observed a color change in the oil phase layer. Overall, this study demonstrates the container suitability of nitrogen plasma and suggests the importance of ensuring the stability of injected nitrogen plasma in cosmetic formulations.

• Journal of Science Education
• /
• v.47 no.3
• /
• pp.238-250
• /
• 2023

This study aims to explore the effect of an appropriate technology program related to water acquisition and purification on scientific attitudes and creative problem-solving skills in elementary school students. Thus, this study developed a learning program related to the appropriate technology composed of 8 sessions, and some were for exploring water acquisition-related scientific principles and the appropriated technology of Warka Tower, and the others were for conducting water purification-related inquiry experiments, such as Life Straw and Drinkable Book, and the last two sessions were for presenting practical tasks through creative ideas and designs and carrying out the relevant campaign activities. For research subjects, this study selected 51 students from two sixth-grade classes, and after modifying the scientific attitude questionnaire and the creative problem-solving skill questionnaire fit for the environment and situation, this study conducted a paired-sample t-test by applying both the questionnaires before and after this program. In addition, while looking into the correlation between scientific attitudes and creative problem-solving skills, based on the post-test results, this study examined relationships between sub-domains perceived by the students after this program was applied. The results can be summarized as below. Out of all the scientific attitudes, curiosity, openness, cooperation, and creativity showed statistically significant results with an increase in the average value when their overall averages of the pre-test were compared with those of the post-test. With creative problem-solving skills, the domain of mastering a specific area and the domain of divergent thinking showed statistically significant results. The correlation analysis results showed that cooperation out of the scientific attitudes had a significant correlation with all the domains of creative problem-solving skills, especially showing the highest correlation coefficient with such sub-domains as critical and logical thinking. All the four domains of creative problem-solving skills showed a number of significant correlations with the sub-domains of scientific attitudes. Through the research results above, this study has several implications on how and where to apply such appropriate technology-related topics in the future and various responses from students.

• Journal of Korean Dental Hygiene Science
• /
• v.6 no.2
• /
• pp.79-89
• /
• 2023

Background and Objectives: The prevalence of dementia is steadily increasing each year, and preceding studies continue to explore the association between dementia and oral health. Dental hygienists require specialized competencies to provide appropriate dental healthcare services, necessitating the development of a tool for the objective measurement of their knowledge levels. This study aimed to develop a knowledge assessment tool for dental hygienists concerning considerations for dental care for patients with dementia. Methods: The study constructed preliminary items based on a literature review and then conducted expert validation, a pilot survey, and the main survey. The main survey was conducted among 220 dental hygienists. Validity and reliability analyses were conducted with the collected data to select the final items, and the correctness rates for each selected item were verified. Results: As a result of the analysis of the collected data, 18 items were eliminated out of a total of 40 preliminary items, leaving a total of 6 factors and 22 items. The Cronbach's α value for the selected items was 0.791. The six factors are as follows: 'Considerations during dental treatment for dementia patients' (5 items), 'medication side effects in dementia patients' (4 items), 'oral care methods for dementia patients' (4 items), 'communication with dementia patients' (4 items), 'psychological reactions of dementia patients' (3 items), and 'guidance for dementia patients' (2 items). The item with the highest correctness rate was item 2 of the 'guidance for dementia patients' category at 98.6%, while the item with the lowest correctness rate was item 2 of the 'psychological reactions of dementia patients' category at 5.9%. Conclusion: This study validated the reliability and validity of the knowledge assessment tool, which lays the foundation for future research on dental hygienists and dementia. It contributes essential data for ongoing education, development of educational programs, and establishing operational guidelines in healthcare institutions.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.313-320
• /
• 2014

Purpose : The purpose of the study is to evaluate the efficiency of Coaxial MLC VMAT plan (Using $273^{\circ}$ and $350^{\circ}$ collimator angle) That the leaf motion direction aligned with axis of OAR (Organ at risk, It means spinal cord or cauda equine in this study.) compare to Universal MLC VMAT plan (using $30^{\circ}$ and $330^{\circ}$ collimator angle) for spine SBRT. Materials and Methods : The 10 cases of spine SBRT that treated with VMAT planned by Coaxial MLC and Varian TBX were enrolled. Those cases were planned by Eclipse (Ver. 10.0.42, Varian, USA), PRO3 (Progressive Resolution Optimizer 10.0.28) and AAA (Anisotropic Analytic Algorithm Ver. 10.0.28) with coplanar $360^{\circ}$ arcs and 10MV FFF (Flattening filter free). Each arc has $273^{\circ}$ and $350^{\circ}$ collimator angle, respectively. The Universal MLC VMAT plans are based on existing treatment plans. Those plans have the same parameters of existing treatment plans but collimator angle. To minimize the dose difference that shows up randomly on optimizing, all plans were optimized and calculated twice respectively. The calculation grid is 0.2 cm and all plans were normalized to the target V100%=90%. The indexes of evaluation are V10Gy, D0.03cc, Dmean of OAR (Organ at risk, It means spinal cord or cauda equine in this study.), H.I (Homogeneity index) of the target and total MU. All Coaxial VMAT plans were verified by gamma test with Mapcheck2 (Sun Nuclear Co., USA), Mapphan (Sun Nuclear Co., USA) and SNC patient (Sun Nuclear Co., USA Ver 6.1.2.18513). Results : The difference between the coaxial and the universal VMAT plans are follow. The coaxial VMAT plan is better in the V10Gy of OAR, Up to 4.1%, at least 0.4%, the average difference was 1.9% and In the D0.03cc of OAR, Up to 83.6 cGy, at least 2.2 cGy, the average difference was 33.3 cGy. In Dmean, Up to 34.8 cGy, at least -13.0 cGy, the average difference was 9.6 cGy that say the coaxial VMAT plans are better except few cases. H.I difference Up to 0.04, at least 0.01, the average difference was 0.02 and the difference of average total MU is 74.1 MU. The coaxial MLC VMAT plan is average 74.1 MU lesser then another. All IMRT verification gamma test results for the coaxial MLC VMAT plan passed over 90.0% at 1mm / 2%. Conclusion : Coaxial MLC VMAT treatment plan appeared to be favorable in most cases than the Universal MLC VMAT treatment planning. It is efficient in lowering the dose of the OAR V10Gy especially. As a result, the Coaxial MLC VMAT plan could be better than the Universal MLC VMAT plan in same MU.