• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.584-589
• /
• 1994

A time-varying nonlinear mathematical model was derived to consider the effect of change in roll radius on tension varation during winding and unwinding. A variable-gain PID controller was designed for tension control at start and stop in a multi-span continuous process system. The controller gains are updated at every control loop as roll radii continuously change. Computer simulation was carried out by using the mathematical model and the controller developed for a typical operating condition including acceleration and deceleration. When the variable-gain PID controller was used, the tension control performance was improved compared with that of existing control method during start-up and stop.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.508-508
• /
• 2012

CST microwave studio is used to simulate the plasma profile of the 450mm CCP source. Standing wave effect becomes important at the high frequency as the electrode radius increases. To solve plasma non-uniformity problem, we designed multi electrode chamber to decreasing standing wave effect. Simulation showed the ratio of input power of each electrode is related with electric field strength. The multi electrode was constructed and measured by 2D probe arrays using floating harmonic method. Uniformity of 450 mm CCP was changed by the ratio of input power of each electrode. We described this dependence with circuit model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.503-504
• /
• 2007

The most Important thing in Sensor Network Design is a Energy Efficiency. Limited sources of Sensor Mote tan occur merging of Protocol. In this paper, we proposed Cross Layer Protocol for Energy Efficienty. The proposed protocol can increase the network life time using multi hop transmission. sensor network should use multi hop communication and small radius because radio in wireless communication is the most spendable thing in sensor network.

• 한국가스학회지
• /
• 제16권4호
• /
• pp.16-22
• /
• 2012

용접기술의 발달과 더불어 기계, 교량, 선박 그리고 가스설비 등의 제작공정을 위하여 용접의 이용이 증가하고 있다. 따라서 그들의 용접 구조물 제작을 위하여 높은 생산성과 안전설계를 고려하는 용접 법을 개발하는 것이 요구되고 있다. 본 연구에서는 재료 두께, 용접층수, 하중 방향 그리고 토우부의 노치 반경과 관련하여 완전 용입 십자형 필릿 용접부의 피로강도 및 피로수명의 특성에 대하여 기초적으로 고찰하였다. 대부분의 피로파괴는 십자형 필릿 용접의 토우부에서 발생하였다. 피로강도 및 피로수명은 토우 부의 노치 반경과 플랭크 각에 의한 응력집중의 영향을 받고 있다. 토우부의 금속이 다층 용접에 의하여 어닐링 되고 확산 되었으며 그 결과 침상 페라이트 조직이 형성되어 피로강도와 피로수명을 향상시켰다.

• 한국지반공학회논문집
• /
• 제26권2호
• /
• pp.15-22
• /
• 2010

본 연구에서는 현장 인발시험을 통하여 강관다단 가압식 쏘일네일링의 거동특성을 분석하였다. 이를 위하여 총 10공의 쏘일네일을 풍화토에 시공하여 인발시험을 실시하였다. 인발시험 결과에 의하면 쏘일네일의 극한인발력은 가압식 쏘일네일이 중력식 쏘일네일에 비하여 42~142% 증가하는 것으로 나타났다. 네일과 주변지반 경계면에서의 전단강도는 중력식 네일이 71kPa, 가압식 네일이 95~166kPa를 보이는 것으로 확인되었다. 가압식 쏘일네일의 경우 중력식 쏘일네일에 비하여 그라우트의 직경이 약 12~27% 증가하는 것으로 나타났다. 또한, 공팽창이론에 의한 가압 시 지반변위 산정값과 현장 인발시험을 통하여 측정한 값을 비교하였으며, 그 결과는 대체적으로 비슷한 경향을 보였다.

• 대한골관절종양학회지
• /
• 제16권2호
• /
• pp.55-61
• /
• 2010

목적: 원위요골에 발생한 골육종의 치료 결과를 분석하고 치료의 지연으로 인한 결과의 차이를 알아보고자 하였다. 대상 및 방법: 12예의 원위요골 골육종 환자를 대상으로 하였으며 진단 및 치료 지연 유무에 따라 두 군으로 나누어 임상 및 병리학적인 인자를 분석하였다. 표준 치료군 6예는 전부 Enneking stage IIB였으며 비표준 치료군 6예는 stage IIB가 5예 III가 1예였다. 결과: 표준 치료군의 5년 실질 및 무병 생존율은 100%, 83%였다. 비표준 치료군의 5년 실질 생존율은 44%였다. 표준치료군과 비표준 치료군은 환자의 평균나이(12세 vs 41세, 종양의 크기(24 ml vs 447 ml), 수술방법(사지구제술 6예 vs 절단술 5예), 치료 전 증상기간(1개월 vs 40개월)이 차이가 있었다. 결론: 표준적인 치료를 받은 원위요골 골육종은 타 부위의 골육종의 평균 생존율에 비해 높았다. 진단 및 치료지연이 있었던 환자는 낮은 생존율을 보였으나 동일한 조건의 타 부위에 비해서는 사망에 이르는 기간이 길었다. 이 부위의 골육종이 사지 3대 호발보위와 병태생리가 다를 가능성이 있으나 더 연구가 필요하다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.830-835
• /
• 2011

DMT Freight is judged that economic performance is good because can increase cargoes than existing freight. However, the existing freight cars, each with a different balance to the body structure is bogie because the vibrations may occur. Thus, by minimizing vibration over the existing freight securing the safety of the driving if you will not have major problems in cargoes. In this study, multi-body dynamic analysis tool, VI-Rail using the actually Gyeongbu Railroad line and an empty, full freight condition include curve radius, track irregularity, cent. DMT freight of the derailed wagons were assessed for safety analysis. Full and empty freight conditions for parity in the Gyeongbu Railroad line(Dongdaegoo ${\leftrightarrow}$Gyungsan) derailment safety analysis, such as derailment safety coefficient and the radius wheel road decrement, echoing the curve and the orbit is affected by the irregularity was found. Full freight condition than the empty conditions showed a significant derailment safety. Overall, the limits of derailment coefficient (Q/P=0.8) and wheel road decrement limits (${\Delta}P/P=0.6$) is less safe with me confirmed that the derailment safety.

• 열처리공학회지
• /
• 제26권5호
• /
• pp.233-240
• /
• 2013

Rapid and homogeneous heating in heat treatment has been a challenging engineering issue throughout a heating temperature over $1,000^{\circ}C$. Induction heating has been widely used in field of heat treatment compared with conventional heating system. Advantages in homogeneous heating, simple fabrication, and repeatable use can be efficiently made with the induction heater. In this paper, numerical analysis of an induction coil system for heat flux gauge heating is performed. The effect of configuration on the heating performance was considered in various cases of the coil radius, distance between the winding, relative height difference between the heat flux gauge and the coil, and the applied current frequency. Temperature distribution within the heat flux gauge at frequency-steady state was calculated with a finite element method. Sensitivity analysis was also performed and the relative importance of 2 key parameters; coil radius, distance between the winding, were taken as main contributors for induction heating.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권2호
• /
• pp.134-147
• /
• 2015

This study proposes a method to determine the effective angular velocity of each motor of a specific four-rows tracked vehicle (FRTV) in order to follow a given turning radius. The configuration of the four-rows tracked vehicle is introduced, and its dynamics analysis model is built using the DAFUL commercial software. The soil has been assumed to be hard ground, and the friction force between the ground and the tracked links is calculated using the Coulomb friction model. This paper uses a simulation to show that the error in the position increased with respect to the angle of the curvatures, so a method is proposed to compensate for the error in the motion of the motors. Various simulations are then carried out to verify the proposed formulation. The effects of the soil characteristics and the driving velocity will be further investigated in future studies.

• Advances in biomechanics and applications
• /
• 제1권3호
• /
• pp.143-158
• /
• 2014

Forearm fractures in children are very common among all pediatric fractures. However, biomechanical investigations on the pediatric forearm are rather scarce, partially due to the complex anatomy, closely situated, interrelated structures, highly dynamic movement patterns, and lack of appropriate tools. The purpose of this study is to develop a computational tool for child forearm investigation and characterize the mechanical responses of a backward fall using the computational model. A three-dimensional 10-year-old child forearm finite element (FE) model, which includes the ulna, radius, carpal bones, metacarpals, phalanges, cartilages and ligaments, was developed. The high-quality hexahedral FE meshes were created using a multi-block approach to ensure computational accuracy. The material properties of the FE model were obtained by scaling reported adult experimental data. The design of computational experiments was performed to investigate material sensitivity and the effects of relevant parameters in backward fall. Numerical results provided a spectrum of child forearm responses with various effective masses and forearm angles. In addition, a conceptual L-shape wrist guard design was simulated and found to be able to reduce child distal radius fracture.