• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2365-2382
• /
• 2014

While single-user spatial multiplexing multiple-input multiple-output (SU-MIMO) allows spatially multiplexed data streams to be transmitted to one node at a time, multi-user spatial multiplexing MIMO (MU-MIMO) enables the simultaneous transmission to multiple nodes. However, if the transmission time required to send packets to each node varies considerably, MU-MIMO may fail to utilize the available MIMO capacity to its full potential. The transmission time typically depends upon two factors: the link quality of the selected channel and the data length (packet size). To utilize the cumulative capacity of multiple channels in MIMO applications, the assignment of channels to each node should be controlled according to the measured channel quality or the transmission queue status of the node.A MAC protocol design that can switch between MU-MIMO and multiple SU-MIMO transmissions by considering the channel quality and queue status information prior to the actual data transmission (i.e., by exchanging control packets between transmitter and receiver pairs) could address such issues in a simple but in attractive way. In this study, we propose a new MAC protocol that is capable of performing such switching and thereby improve the system performance of very high throughput WLANs. The detailed performance analysis demonstrates that greater benefits can be obtained using the proposed scheme, as compared to conventional MU-MIMO transmission schemes.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.77-85
• /
• 2018

Multi-User Multiple-Input Multiple-Output (MU-MIMO) is the core technology for improving the channel capacity compared to Single-User MIMO (SU-MIMO) by using multiuser gain and spatial diversity. Key problem for the MU-MIMO is the user selection which is the grouping the users optimally. To solve this problem, we adopt Extreme Value Theory (EVT) at the beginning of the proposed algorithm, which defines a primary user set instead of a single user that has maximum channel power according to a predetermined threshold. Each user in the primary set is then paired with all of the users in the system to define user groups. By comparing these user groups, the group that produces a maximum sum rate can be determined. Through computer simulations, we have found that the proposed method outperforms the conventional technique yielding a sum rate that is 0.81 bps/Hz higher when the transmit signal to noise ratio (SNR) is 30 dB and the total number of users is 100.

• Journal of information and communication convergence engineering
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2019

In this paper, we present the block diagonalization (BD) algorithm for the multiple-user multiple input multiple output (MU-MIMO) $4{\times}4$ system using specific purpose processor (SPP) hardware. Our objective is to improve the single-user MIMO (SU-MIMO) system using the MU-MIMO technology, which is remarkably fast and allows more users to connect simultaneously. To that end, our MU-MIMO precoder uses the BD algorithm to ensure signal integrity when connecting multiple users; but remains accurate and stable. However, a precoder that uses the BD algorithm is computationally complex; therefore, we use an SPP with special functions designed to compute the BD algorithm. The implementation test results show that our SPP computes the BD algorithm faster than the software solution.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.1
• /
• pp.45-50
• /
• 2023

In order to improve a total system throughput when a base station (BS) transmits data to user equipments (UEs), we propose a scheme to apply multiuser multiple-input multiple-output (MU-MIMO), space-time block coding (STBC), and non-orthogonal multiple access (NOMA) together. An MU-MIMO is applied to two UEs near the BS and STBC is applied to a UE far from the BS because of the difficulty of obtaining the channel information. Also NOMA is applied to differentiate the data from the near UE and the far UE. Two orthognal precoding vectors are used for the MU-MIMO UEs and it causes no interference between them. The STBC technique with the two procoding vectors are also used for the far UEs. Through performance analysis and simulation, we show that the proposed scheme has higher total system throughput than the conventional ones.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.121-127
• /
• 2012

In this paper, we propose a new beamforming method which is used in Multiple User-Multiple Input Multiple Output (MU-MIMO) system. An experimental system consists of LTE based TDD base-station which has 2 MIMO elements each of which contains 10-array antennas and 2 mobile terminals each of which has a single antenna. We demonstrate that the Multiple Access Interference can further be reduced by appending a beamforming procedure in MU-MIMO system in which various users share a given channel resource. The proposed algorithm is the ordinary Lagrange beamforming algorithm combined with Zero-Forcing. It is demonstrated that the proposed beamforming method outperforms a conventional method which is the ZF at least by 8dB in terms of SNR through computer simulations. From experimental tests, we verify the feasibility of the proposed beamforming algorithm for realizing a practical LTE based TDD base-station for utilizing channel resources more efficiently.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.210-217
• /
• 2016

In this paper, we propose a low complexity multiple-input multiple-output (MIMO) detection algorithm with adaptive interference mitigation in downlink multiuser MIMO (DL MU-MIMO) systems with quantization error of the channel state information (CSI) feedback. In DL MU-MIMO systems using the imperfect precoding matrix caused by quantization error of the CSI feedback, the station receives the desired signal as well as the residual interference signal. Therefore, a complexMIMO detection algorithm with interference mitigation is required for mitigating the residual interference. To reduce the computational complexity, we propose a MIMO detection algorithm with adaptive interference mitigation. The proposed algorithm adaptively mitigates the residual interference by using the maximum likelihood detection (MLD) error criterion (MEC). We derive a theoretical MEC by using the MLD error condition and a practical MEC by approximating the theoretical MEC. In conclusion, the proposed algorithm adaptively performs interference mitigation when satisfying the practical MEC. Simulation results show that the proposed algorithm reduces the computational complexity and has the same performance, compared to the generalized sphere decoder, which always performs interference mitigation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.18-25
• /
• 2012

As the demand for smart phone user is rapidly increasing in recent years, the development of new mobile communication system which provides more improved quality compared to existing 3G standard is highly requested. In this point, the long-term evolution (LTE) system, which was being developed in mid of 2000's, has attracted a considerable attention. The LTE has been developed continuously to result a release 10 which is called as LTE-Advanced (LTE-A) in 2010. Among various features in LTE-A, the multiuser MIMO (MU-MIMO) design is expected to give better quality for throughput, spectral efficiency, and latency. In this paper, we first review the development process from LTE to LTE-A. We also provide the overview of design challenges and specific solutions for MU-MIMO systems developed in LTE-Advanced standard.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.57-60
• /
• 2015

Recently, a multi-user massive MIMO (MU-Massive MIMO) network has been attracting tremendous interest as one of technologies to accommodate explosively increasing mobile data traffic. The MU-Massive MIMO network can significantly enhance the network capacity because a base station (BS) equipped with large-scale transmit antennas can transmit high-rate data to multiple users simultaneously. In the MU-Massive MIMO network, transmit antenna selection schemes are generally used to decrease the computational complexity and cost of the BS. In this paper, we investigate the energy efficiency of the transmit antenna selection scheme in the MU-Massive MIMO network and the optimal number of selected transmit antennas for maximizing the energy efficiency.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.99-104
• /
• 2014

Nowadays, various researches fulfill in many communication engineering area for B4G (Beyond Forth Generation). Next LTE-A (Long Term Evolution Advanced), MU-MIMO (Multi-User Multi Input Multi Output) method raises to upgrade throughput performance. However, the method of user selection is not decided because of many types and discussions in MU-MIMO system. Many existing methods are powerful for enhancing performance but have various restrictions in practical implementation. Fairness problem is primary restriction in this area. Existing papers emphasis algorithm to increase sum-rate but we introduce an algorithm about dealing with fairness problem for real commercialization implementation. Therefore, this paper introduces new user selection method in MU-MIMO system. This method overcomes a fairness problem in SUS (Semiorthogonal User Selection) algorithm. We can use the method to get a similar sum-rate with SUS and a high fairness performance. And this paper uses a hybrid method with SC-SUS (Superposition Coding SUS) algorithm and SUS algorithm. We find a threshold value of optimal performance by experimental method. We show this performance by computer simulation with MATLAB and analysis that results. And we compare the results with another paper's that different way to solve fairness problem.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.280-290
• /
• 2016

To implement high-order multiuser multiple input and multiple output (MU-MIMO) for massive MIMO systems, there must be a feedback scheme that can warrant its performance with a limited signaling overhead. The interference-to-noise ratio can be a basis for a novel form of Codebook (CB)-based MU-MIMO feedback scheme. The objective of this paper is to verify such a scheme's performance under a practical system configuration with a 3D channel model in various radio environments. We evaluate the performance of various CB-based feedback schemes with different types of overhead reduction approaches, providing an experimental ground with which to optimize a CB-based MU-MIMO feedback scheme while identifying the design constraints for a massive MIMO system.