• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.434-441
• /
• 2000

This paper estabilsh the systematical scheme that evaluates the operation frequencies of the MTT(Multiple Tie Tamper). An evaluation of the operation frequencies, covering 4 different permanent ways that are Kyungbu, Homan, Jungang and Youngdong, has been carried out using real track irregularities. The deterioration rate of track irregularities used to evaluate rational operation frequencies of MTT in a block of railway track. Furthermore, this paper provides the scheme that prevents damage due to excess using of MTT and to promote efficiency of MTT application.

• 한국철도학회논문집
• /
• 제11권4호
• /
• pp.384-389
• /
• 2008

궤도구성품 중 도상은 레일과 침목으로 전달되는 열차하중을 노반으로 전달하는 중간매개체 역할을 하며, 도상자갈의 열화는 궤도틀림 진전에 직접적으로 영향을 미친다. 본 연구에서는 대형 보선장비(멀티플 타이 탬퍼; MTT; Multiple Tie Tamper)를 사용한 도상다짐작업과 누적통과톤수가 자갈 세립화 및 도상열화의 주요 원인이다. 도상자갈의 열화특성을 파악하기 위하여 시험용 궤도 부설을 통한 현장실험(2장. 실외 실측시험)과 실제의 운행 환경을 모사한 모형실험(3장. 실내 모형실험)을 실시하였고 실제 운용중인 고속선에서 채취한 시료의 파쇄입자 비율과 비교분석하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1024-1028
• /
• 2008

The ballast, one of track components, plays an essential role as intermedium in transmitting train load to subgrade safely, and the deterioration of ballast directly effects the growth of track irregularity. In this study, we determined the main factor of ballast deterioration was miniature of ballast gravel caused MTT(Multiple Tie Tamper) works and accumulated traffic loads. To estimate the deterioration characteristics of ballast, we carried out field test through track construction for test and the model test simulating the actual operation environment, have done a comparative analysis with the sample's result(crushing rate) of high-speed railroad running actually.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.450-457
• /
• 2000

This paper establishes a scheme to estimate track quality using standard deviation and deterioration rate of track irregularities. To provide index of quality, standard deviation and deterioration rate of track irregularities are analyed. As an index, standard deviation and deterioration rate were applied to decision of corrective maintenance and replacement maintenance, respectively. Further, this paper proposes a basic scheme for a modernization of mechanize track maintenance that using MTT(Multiple Tie Tamper) and Ballast Cleaner.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1113-1118
• /
• 2004

Ballasted track is constructed in consideration of the maintenance. The application time and frequency of MTT(Multiple Tie Tamper) and BS(Ballast Cleaner) depend on track geometry measurements. This paper presents the application of Ground Penetrating Radar(GPR), Falling Weight Deflectometer(FWD), and Portable Ballast Sampler (PBS) to evaluate the effects of track geometry due to substructure deterioration and to build a reliable substructure evaluation system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.268-273
• /
• 2008

The ballast, one of track components, plays an essential role as intermedium in transmitting train load to subgrade safely, and the deterioration of ballast directly effects the growth of track irregularity. So far, gravel fining of ballast track was mainly related to the repetition of train loads, but was gradually increased with using MTT(Multiple Tie Tamper) recently. Therefore, in this study, an evaluation of the abrasion and crush process of ballast particles was performed with outdoor field test by MTT works. From this study, the amount of abrasion and crush of ballast particles appeared to increase linearly with MTT works, and the gradient of particle size distribution curve appeared to deviate gradually from a criterion of aggregated ballast size distribution in high-speed railroad.

• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.1-6
• /
• 2006

세계적으로 기존선 속도향상을 위해 분기기 개량 연구가 진행되어 왔다. 분기기는 선로시스템에서 구조적으로 가장 복잡한 장치로써 안정적인 구조가 필요하다. 이에 분기기 부설시 정확한 조립은 승차감과 열차주행 안전성에 크게 영향을 끼친다. 이러한 문제점 해결을 위해 최근 철도 선진국에서는 분절 PC침목을 이용한 공장에서의 사전 일체화 정밀조립 후 현장까지 운반한다. 본 연구에서는 우리나라에서 처음으로 도입된 분절형 PC침목의 안전성 평가를 위해 실내 성능평가시험을 실시하였다. 시험조건으로 현장에서 STT, MTT와 같은 유지보수 작업시 발행 가능한 최악의 조건을 고려하여 분절침목의 구조적 안전성을 검토하였다.