• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.424-430
• /
• 2010

Immuno-modulatory activities of peptides from Asterias amurensis were investigated using a nano-encapsulation process. The molecular weights of the peptides in the range of 5-7 kDa were separated using Sephadex G-75 gel filtration. Eighty-five percent of the nano-particles were in the 300 nm range using dynamic light scattering. The cytotoxicity of the A. amurensis nano-particles against CCD-986sk human dermal fibroblast cells was 11.64% after adding 1.0 mg/mL of the samples, which was lower than that from the control (13.28% collagen). The secretion of $NO^-$ from macrophages was estimated as $40\;{\mu}M$ after adding 1.0 mg/mL of gelatin nano-particles, which was higher than the others. Prostaglandin $E_2$ production from UV-induced human skin cells decreased greatly to 860 pg/mL after adding 1.0 mg/mL of the samples. Confocal microscopy revealed that nano-particles effectively penetrated the cells within 1 hour. From these results, we consider that nano-encapsulation of the peptides from A. amurensis can improve their biological functions.

• Korean Journal of Food Science and Technology
• /
• v.44 no.3
• /
• pp.378-381
• /
• 2012

The monitoring of the uniconazole residual pesticide for agricultural products was conducted by multiclass pesticide multiresidue methods. Samples were collected from June to November, 2011. Uniconazole pesticide was detected in 49 samples from a total of 3,939 samples. The amount of uniconazole pesticide ranged from 0.09 to 17.89 mg/kg in 49 samples. This method was described for the simultaneous determination of uniconazole by gas chromatography with a nitrogen phosphorus detector (GC-NPD) and mass spectrometry (MS). The limit of detection and quantification were 0.006 and 0.018 mg/kg GC-NPD, respectively. For an evaluation of the GC-NPD method, uniconazole spiked into gyeojachae at a level of 0.5, 5 mg/kg was determined. The recoveries of uniconazole by the GC-NPD method ranged from 83.4 to 101.4%. The results indicate that the method of simultaneous analysis is applicable to uniconazole analysis.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.169-178
• /
• 2011

BACKGROUND: This study aimed to estimate the measurement uncertainty associated with determination of cadmium and lead from tomato paste by ICP/MS. The sources of measurement uncertainty (i.e. sample weight, final volume, standard weight, purity, molecular weight, working standard solution, calibration curve, recovery and repeatability) in associated with the analysis of cadmium and lead were evaluated. METHODS AND RESULTS: The guide to the expression of uncertainty was used for the GUM (Guide to the expression of Uncertainty in Measurement) and Draft EURACHEM/CITAC (EURACHEM: A network of organization for analytical chemistry in Europe/Co-Operation on International Traceability in Analytical Chemistry) Guide with mathematical calculation and statistical analysis. The uncertainty components were evaluated by either Type A or Type B methods and the combined standard uncertainty were calculated by statistical analysis using several factors. Expected uncertainty of cadmium and lead was $0.106{\pm}0.015$ mg/kg (k=2.09) and $0.302{\pm}0.029$ mg/kg (k=2.16), on basis of 95% confidence of Certified Reference Material (CRM) which was within certification range of $0.112{\pm}0.007$ mg/kg for cadmium (k=2.03) and $0.316{\pm}0.021$ mg/kg for lead (k=2.01), respectively. CONCLUSION(s): The most influential components in the uncertainty of heavy metals analysis were confirmed as recovery, standard calibration curve and standard solution were identified as the most influential components causing uncertainty of heavy metal analysis. Therefore, more careful consideration is required in these steps to reduce uncertainty of heavy metals analysis in tomato paste.

• Korean Journal of Food Science and Technology
• /
• v.49 no.5
• /
• pp.524-531
• /
• 2017

The study aimed to investigate the antioxidant activity and neuroprotective effect of the ethyl acetate fraction from Orostachys japonicus A. Berger extract (EFOJ) and its main constituent compounds. Among all fractions, the highest content of total phenolics was found in EFOJ. The antioxidant activity of EFOJ was confirmed through the 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS), 1-1-diphenyl-2-picryl-hydrazyl (DPPH), ferric reducing antioxidant power (FRAP) assays and the inhibitory effect of malondialdehyde (MDA). In addition, we ascertained that EFOJ not only decreased the intracellular ROS level, but also protected the neuronal cells against $H_2O_2$-induced oxidative stress. In liquid chromatography-mass spectrometry analysis, the following were found to be the main compounds of EFOJ: quercetin-3-O-glucoside, kaempferol-3-O-rutinoside, kaempferol-3-O-glucoside, and kaempferol-3-O-rhamnoside. Consequently, these results suggested that the protective effect on neuronal cells was based on the antioxidant activities of the physiologically active compounds of Orostachys japonicus A. Berger extract, which could therefore help to mitigate neurodegenerative diseases.

• Journal of dental hygiene science
• /
• v.15 no.1
• /
• pp.24-31
• /
• 2015

This research was conducted in order to examine the effect of tooth brushing room M elementary school in Changwon-city and to provide foundation data for effective project operation afterwards. The subjects were 347 students at the M elementary school where the tooth brushing room was being taught. The control group is 289 students at J elementary school where the tooth brushing room was not being taught. Research and analysis were carried out with structured survey and examination of decayed, missing, filled teeth (DMFT) index, decayed, missing, filled tooth surface (DMFS) index and O'leary index. The data was analysed by IBM SPSS Statistics ver. 19.0 program and the result is as follows: Depends on the tooth brushing room there was difference in statistical significance in filling teeth, sealant tooth surface, filling tooth surface, missing tooth surface, DMFS, O'leary index between the subject and control group. The less the frequency of brushing, the higher the DMFT index. Negative correlation was statistically significant. With incorrect brushing method, the less the frequency, the higher the DMFS index, Negative correlation was statistically significant. When the tooth brushing room was being implemented, O'leary index became low, negative correlation was statistically significant. As a result, in order to continue the effective operation of tooth brushing room, constant supervision and monitoring on students should be acutely needed by a principal, a school nurse and teachers in charge. Also together with a systemized cooperation between a health center and a nearby university's related majors departments, the research proposes to execute constant oral health education and to expand the implementation project of the tooth brushing room at nearby elementary schools.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.226-245
• /
• 2019

Beopjusa Gwaebultaeng (Large Buddhist Painting), designated as Treasure No. 1259, was painted in 1766 and featured Yeorae (Buddha) at the center in the style of a single figure. It is the longest existing buddhist painting and was created by Duhun, a painter who was representative of 18th century Korean artists. His other remaining work is Seokgayeorae Gwaebultaeng (1767) in Tongdosa Temple. Considering their same iconography, they are assumed to have used the same underdrawing. Duhun had a superb ability to maintain a consistent underdrawing, while most painters changed theirs within a year. The Beopjusa painting carries significance because it was not only painted earlier than the one in Tongdosa, but also indicates possible relevance to the royal family through its records. Beopjusa Temple is also the site of Seonhuigung Wondang, a shrine housing the spirit tablet of Lady Yi Youngbin, also known as Lady Seonhui. Having been built only a year before Beopjusa Gwaebultaeng was painted, it served as a basis for the presumption that it has a connection to the royal family. In particular, a group of unmarried women is noticeable in the record of Beopjusa painting. The names of some people, including Ms. Lee, born in the year of Gyengjin, are recorded on the Bonginsa Temple Building, the construction of which Lady Yi Youngbin and Princess Hwawan donated money to. In this regard, they are probably court ladies related to Lady Yi Youngbin. The connection of Beopjusa Gwaebultaeng with the royal family is also verified by a prayer at the bottom of the painting, reading "JusangJusamJeonhaSumanse (主上主三殿下壽萬歲, May the king live forever)." While looking into the historical characteristics of this art, this study took an approach based on scientific analysis. Damages to Beopjusa Gwaebultaeng include: bending, folding, wrinkles, stains due to moisture, pigment spalling, point-shaped pigment spalling, and pigment penetration to the lining paper at the back. According to the results of an analysis of the painting pigments, white lead was used as a white pigment, while an ink stick and indigo were used for black. For red, cinnabar and minium were used independently or were combined. For purple, organic pigments seem to have been used. For yellow, white lead and gamboge were mixed, or gamboge was painted over white lead, and gold foil was adopted for storage. As a green pigment, atacamite or a mixture of atacamite and malachite was used. Azurite and smalt were used separately or together as blue pigments.

• Journal of Life Science
• /
• v.23 no.7
• /
• pp.854-862
• /
• 2013

The number of thoracic and lumbar vertebrae is known to be an unfixed trait among mammals. This study focused on the relationship between numerical variations of cervical (CER), thoracic (THO), and lumbar (LUM) vertebrae and the total number of vertebrae (TNV) and carcass traits in Jejunative black pigs (JBPs), Landrace pigs, and their intercrossed $F_2$ population. There were no numerical variations in CER vertebrae. On the other hand, the numbers of THO and LUM vertebrae and the TNV varied in all three populations. Of the traits investigated in the three populations, only the means${\pm}$SE of the LUM vertebrae did not show statistical significance (p>0.05). The carcass weights (CW), meat color (MC), marbling score (MS), backfat thickness (BFT), carcass length (CLE), THO vertebrae, and TNV all showed statistical significance (p<0.05). The JBP had 14-16 THO vertebrae, 5-6 LUM vertebrae, and 27-29 TNV. The Landrace pigs had 15-16 THO vertebrae, 5-7 LUM vertebrae, and 28-29 TNV. The $F_2$ population had 14-17 THO vertebrae, 5-7 LUM vertebrae, and 27-30 TNV. In the F2 population, increased numbers of THO vertebrae and TNV were associated with a significant increase in the CW, CLE, and BFT (p<0.05). In particular, the increase in the TNV was caused by an increase in the number of THO rather than LUM vertebrae. Although the animals with a greater number of THO and TNV had thicker backfat, they had a longer CLE and a heavier CW. Both these traits are economically more important than the level of backfat when determining the productivity level. These results suggest that genetic selection to increase the number of vertebrae, especially in Landrace pigs, JBPs, and their related populations, may be an excellent strategy for improving productivity.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.3
• /
• pp.161-172
• /
• 2011

Open beaker digestion method is routinely used as the sample preparation technique for trace element determination of rock samples by inductively coupled plasma mass spectrometry, With this method, however, dissolution of Zr and Hf is not always guaranteed especially when the samples contain refractory minerals. In this study, glass bead digestion technique was compared with conventional open beaker digestion technique for the sample preparation of three USGS rock standards such as AGV-2, BHVO-2, and G-3. Thirty trace elements including rare earth elements were analysed by ICP-MS and ICP-AES. There were no clear differences in analytical results for the AGV-2 and BHVO-2 standards between the two techniques, but Zr, Hf, Y, and middle- to heavy- rare earth element concentrations of the G-3 standard prepared by open beaker digestion technique were significantly lower than the recommended values. This can be attributed to the presence of refractory mineral zircon. On the contrary, all the analytical results of the G-3 standard prepared by glass bead digestion technique were in good agreement with the recommended values, indicating complete dissolution of zircon. The analytical results show that the volatile elements such as Pb and Zn were not lost during the preparation of glass bead. Low dilution glass bead digestion technique described here will be very helpful to enhance precision and accuracy of trace element analysis for geological samples containing refractory minerals.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.936-942
• /
• 2016

As the incidence of environmental diseases is increasing due to harmful environmental factors, there is a rising interest in developing eco-friendly materials for housing. In this study, we sought to develop antimicrobial interior fabric blind materials by employing ethanol extract of a medicinal plant Zanthoxylum piperitum DC. As determined by the disc diffusion method, the zones of inhibition of the pericarp ethanol extract at a concentration of 5 mg/disc against Klebsiella pneumoniae, Staphylococcus aureus, and Streptococcus mutans were 13.5±1.5 mm, 14.0±0.5 mm and 15.0±0.1 mm, respectively, whereas the leaf ethanol extract (5 mg/disc) against K. pneumoniae, S. aureus, and S. mutans were 12.8± 0.3 mm, 13.5±1.0 mm, and 12.0±0.1 mm, respectively. The IC₅₀ of the leaf ethanol extract against K. pneumoniae, S. aureus and S. mutans were about 0.5 mg/ml, 0.1 mg/ml and 1.0 mg/ml respectively. To examine whether the leaf ethanol extract possessing antibacterial activity of Z. piperitum DC can be applicable to production of antimicrobial fabric blind materials, the fabrics treated with either 1.0% or 2.0% of the leaf ethanol extract were tested for antibacterial activity against K. pneumoniae and S. aureus using International Standard Fabrics Test Method. The results indicate that the fabric treated with the ethanol extract of Z. piperitum DC possesses an excellent antimicrobial activity against both pathogenic bacteria. These results suggest that Z. piperitum DC may be applicable to producing functional fabrics which are effective in reducing the harmful bacterial factors in indoor environments.