• 제목/요약/키워드: MR fluid damper

검색결과 128건 처리시간 0.032초

Herschel-Bulkley 모델을 이용한 MR 댐퍼 승용차의 제어 성능 고찰 (Control Performance Investigation of MR Fluid Damper using Herschel-Bulkley Shear Model)

  • 이덕영;황우석
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.323-328
    • /
    • 2002
  • The control performance of a vehicle installed with an MR(magnetorheological) fluid-based damper is investigated on the basis of Herschel-Bulkley shear model. Generally, most of MR fluid damper has been analyzed based on a simple Bingham-plastic shear model. However, the Bingham-plastic shear model can not well describe the behavior of the damper on the condition of high velocity and high current field input. Therefore, in this study, the Herschel-Bulkley shear model in which the constant post-yield plastic viscosity in Bingham model is replaced with a power law model dependent on shear rate is used to assess control performance of a vehicle with MR fluid damper suspension system. This study deals with a two-degree-of-freedom suspension using the MR fluid damper for a quarter car model. The response for the bump input to identify the fastness of MR fluid damper embedded skyhook controller and requested magnetic field are investigated.

  • PDF

전단 모드형 자성유체댐퍼의 설계 (Design of Direct-Shear Mode MR Damper)

  • 김해란;이영신;이은엽;이규섭;오부진
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회A
    • /
    • pp.626-631
    • /
    • 2007
  • MR(Magneto-rheological) fluid is smart material that can be changed viscosity by controlling the magnetic field. MR damper with MR fluid can control damping force. It can be used extensively many engineering structures for reducing the effect of dynamic external disturbances. There are three kinds of MR dampers, such as valve mode, direct-shear mode and squeeze mode. In this study, design process of direct-shear mode MR damper with the MR fluid gap was developed. The parameters that used in the direct-shear mode MR damper Informed from the experiment of valve mode MR damper of Lord company. Magnetic analysis with finite element method was performed to find the optimal annular gap.

  • PDF

불완전 발달 유체 유동을 고려한 MR댐퍼 착륙장치 모델링 (Modeling of MR Damper Landing Gear Considering Incompletely Developed Fluid Flow)

  • 이효상;장대성;황재혁
    • 항공우주시스템공학회지
    • /
    • 제15권1호
    • /
    • pp.7-18
    • /
    • 2021
  • 반능동형 MR댐퍼 착륙장치는 MR유체가 환형 유로를 지날 때 유체감쇠력 및 자장 제어 감쇠력을 발생시키는 댐퍼이다. 환형 유로를 지나는 MR 유체의 경우 필연적으로 불완전 발달 유동이 발생하게 되어, 이는 유체 감쇠력을 포함하는 댐퍼 내력 계산에 오차를 발생시키는 원인이 된다. 이로 인해 댐퍼 구조적 파라미터 설계 및 제어 이득 선정이 부정확해지며, 착륙장치의 동특성 및 충격흡수성능 저하를 초래하게 된다. 본 논문에서는 MR댐퍼 환형 유로의 입구영역에서 발생하는 추가적인 감쇠력을 고려한 MR댐퍼 착륙장치의 수학적 모델을 유도하였다. 본 논문에서 유도한 수학적 모델링을 MR댐퍼 착륙장치의 설계 및 최적화 과정에 적용한다면 좀 더 정확한 내력 예측으로 우수한 성능의 MR댐퍼 착륙장치를 설계할 수 있을 것으로 판단된다.

차량용 MR충격댐퍼의 동특성 해석 (Dynamic Characteristic Analysis of MR Impact Damper for Vehicle System)

  • 송현정;우다윗;최승복
    • 한국소음진동공학회논문집
    • /
    • 제16권7호
    • /
    • pp.754-761
    • /
    • 2006
  • This paper presents the dynamic characteristics of MR impact damper for vehicle collision system. Various types of mechanism have been proposed to reduce force transmitted to the vehicle chassis and finally to protect occupants from injury. In the case of head-on collision, the bumper makes main role of isolation material for collision attenuation. In this study, the proposed bumper system consists of MR impact damper and structures. The MR impact damper utilizes MR fluid which has reversible properties with applied magnetic field. The MR fluid operates under flow mode. The bellows is used for generation of fluid flow. A mathematical model of the MR impact damper is derived incorporating with Bingham model of the MR fluid. Field dependent damping force is investigated with time and frequency domain. The MR impact damper is then incorporated with vehicle crash system. The governing equation of motion of vehicle model is formulated considering occupant model. Dynamic characteristics of vehicle collision system investigated with computer simulation.

차량용 MR 충격댐퍼의 동특성 해석 (Dynamic Characteristic Analysis of MR Impact Damper for Vehicle System)

  • 송현정;우다윗;최승복
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 춘계학술대회논문집
    • /
    • pp.147-152
    • /
    • 2006
  • This paper presents the dynamic characteristics of MR impact damper for vehicle collision system. Various types of mechanism have been proposed for reduce transmitted force to vehicle chassis and finally protect occupants from injury. In the case of frontal collision, the bumper make main role of isolation material for collision attenuation. In this study, proposed bumper system composed of MR impact damper and structures. The MR impact damper is to adopted MR fluid which has reversible properties with applied magnetic field. MR fluid operates under flow mode with Bingham flow and bellows is used for generation of fluid flow. Mathematical model of MR impact damper incorporated with MR fluid is established. Field dependent damping force is investigated with time and frequency domain. The MR impact damper is then incorporated with vehicle crash system. The governing equation of motion of vehicle model is formulated considering occupant model. Dynamic characteristics of vehicle collision system investigated with computer simulation.

  • PDF

MR 댐퍼의 동특성 해석 (Dynamic Characteristics Analysis of A Magneto-Rheological Damper)

  • 정희경;백운경
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문집
    • /
    • pp.222-227
    • /
    • 2002
  • MR(Magneto-rheological) fluid is smart fluid that can change its characteristics then magnetic fields are applied. Recently, many researches have been performed on this MR fluid for the application in a vareity of areas including automobile shock absorbers. This paper describes the design procedure of a MR damper and the analysis results of its dynamic characteristics. MR fluid in the magnetic field shows initial yield shear stress and increasing resistive viscosity with final saturation thereafter. Herschel-Bulkley model is used to simulate the flow characteristics of MR fluid and magnetic analysis is used to identify the magnetic property of the MR fluid in the orifice of the damper. The dynamic characteristics of the damper was predicted and compared with the experimental results for typical sinusoidal excitations.

  • PDF

소형 MR 댐퍼의 모델링 및 진동제어 (Modeling and Vibration Control of Small-sized Magneto-rheological Damper)

  • 이종우;성민상;우제관;최승복
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2012년도 추계학술대회 논문집
    • /
    • pp.344-349
    • /
    • 2012
  • This paper presents a new small-sized damper featuring magneto-rheological (MR) fluid which can be applied to vibration control system. The proposed MR damper consists of cylinder, piston, a couple of bearings, oil-seals and magnetic circuit which has two coils. In this damper, approximately 5cc of MR fluid is used. The damping force of the MR damper is designed to be followed by linear shear-mode Bingham-plastic model. In order to verify the performance of the MR damper, an experimental apparatus is established. In the experimental test, the damping force of the MR damper is measured with respect to time, displacement and velocity. In addition, the time response of MR damper is measured when 1A of step current is applied. Finally, The proposed small MR damper is applied to vibration control. In this process, a simple 1-DOF system is modeled and controlled using PID controller.

  • PDF

소형 MR 댐퍼의 모델링 및 진동제어 (Modeling and Vibration Control of Small-sized Magneto-rheological Damper)

  • 이종우;성민상;우제관;최승복
    • 한국소음진동공학회논문집
    • /
    • 제22권11호
    • /
    • pp.1121-1127
    • /
    • 2012
  • This paper presents a new small-sized damper featuring magneto-rheological(MR) fluid which can be applied to vibration control system. The proposed MR damper consists of cylinder, piston, a couple of bearings, oil-seals and magnetic circuit which has two coils. In this damper, approximately 5cc of MR fluid is used. The damping force of the MR damper is designed to be followed by linear shear-mode Bingham-plastic model. In order to verify the performance of the MR damper, an experimental apparatus is established. In the experimental test, the damping force of the MR damper is measured with respect to time, displacement and velocity. In addition, the time response of MR damper is measured when 1A of step current is applied. Finally, the proposed small MR damper is applied to vibration control. In this process, a simple 1-DOF system is modeled and controlled using PID controller.

MR유체를 이용한 스퀴즈필름 댐퍼의 응답특성 (Performance of Squeeze Film Damper Using Magneto-Rheological Fluid)

  • 안영공;양보석;신동춘;김동조
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.67-70
    • /
    • 2002
  • This paper presents the property of the Squeeze Film Damper (SFD) using Magneto-Rheological fluid (MR fluid). The damping property of a SFD for a flexible rotor system varied according to vibration mode. MR fluid is known as a functional fluid with controllable apparent viscosity of the fluid by applied magnetic field strength. When the MR fluid is applied in the SFD, the SFD using MR fluid can effectively reduce vibrations of the flexible rotor in a wide range of rotating speed by control of the applied magnetic field strength. To investigate in detail the SFD using MR fluid, the SFD to support one mass was constructed and its performance was experimentally investigated in the present study. The damping property of the SFD using MR fluid has viscous damping by Newtonian fluid, but not Coulomb friction by Bingham fluid. Therefore, The system damped by the SFD can be considered as a linear system.

  • PDF

MR 유체물성과 오리피스 형상에 대한 MR 댐퍼 성능비교 연구 (Study on Performance Comparison of MR Damper for Fluid Properties and Orifice Shapes)

  • 권영철;박삼진;김기영;백대성;이석현
    • 한국산학기술학회논문지
    • /
    • 제15권3호
    • /
    • pp.1305-1310
    • /
    • 2014
  • MR 댐퍼는 자기장의 영향으로 인한 MR 유체의 응집현상으로 자기전단력을 발생한다. MR 유체는 기존유체와 자기입자로 구성되어 있다. 본 연구에서 밀도 1.3, 1.5, $1.7g/cm^3$ 그리고 점도 1,000, 10,000cP를 가지는 MR 유체 6종과 오리피스 형상 6종에 대한 MR 댐퍼의 댐핑력을 조사하였다. MR 유체의 밀도와 점도 변화에 따라서 MR 댐퍼의 댐핑력이 변하였다. 오리피스 형상변화에 대한 댐핑력은 오리피스 갭이 적고 길이가 짧을수록 크게 나타났다. 이들 연구결과로부터 MR 댐퍼의 최적설계를 위해서는 MR 유체의 선정과 오리피스 형상이 중요한 설계변수임을 확인하였다.