• 제목/요약/키워드: MOTOR

검색결과 17,560건 처리시간 0.041초

크롬 취급 사업장의 작업환경 및 근로자 폭로 실태에 관한 연구 (A Study of Working Environments and Workers Exposed to Chromium)

  • 유병철;손병철;전진호;손혜숙;한용수;이채언;정운
    • Journal of Preventive Medicine and Public Health
    • /
    • 제27권3호
    • /
    • pp.517-530
    • /
    • 1994
  • For the purpose of providing the basic data for health management of workers who are exposed to chromium and for improving the quality of working environment, the authors evaluated blood and urinary level of chromium, the occupational history. AST, ALT, Hb, Hct, nasal specular examinaton on 287 workers who have been dealed chromium compounds in 56 manufacturing Industries of five types, that is, 38 metal plating services(plating),4 manufacture of other fabricated metal products (fabricated metal product), 5 manufacturing of dyestuff(dyestuff), 6 dressing and dyeing of leather(leather), 3 others(manufacture of pottery and ceramic househod wares, motor vehicles, electronic valves and tubes and other electronic components) and also measured the level of chromium in air from February to October 1993. The results were as follows ; 1. The utilized type of chromium compounds was the hexavalent state in plating fabricated metal product dyestuff, leather and the trivalent state in .other, and atmosperic chromium concentration as geometric mean was $0.0138mg/m^3(0.001{\sim}0.068mg/m^3)$ in plating, $0.0115mg/m^3(0.006{\sim}0.015mg/m^3)$ in fabricated matal product, $0.068mg/m^3(0.002{\sim}0.019mg/m^3)$ in dyestuff, $0.0083mg/m^3(0.002{\sim}0.028mg/m^3)$ in leather $0.0039mg/m^3(0.003{\sim}0.005mg/m^3)$ in other by the type of industry and it exceeded TLV-TWA ($0.05mg/m^3$) in five (13.6%) of plating services. 2. The geometric mean of chromium in blood was $1.54{\mu}g/dl(0.10{\sim}3.62{\mu}g/dl)$ in Plantng, $0.94{\mu}g/dl(0.27{\sim}2.82{\mu}g/dl)$ in fabricated metal product, $0.51{\mu}g/dl(0.10{\sim}3.25{\mu}g/dl)$ in dyestuff, $0.87{\mu}g/dl(0.15{\sim}8.00{\mu}g/dl)$ in leather, $0.55{\mu}g/dl(0.20{\sim}2.28{\mu}g/dl)$ in other by the type of industry(p<0.001). 3. The geometric mean of chromium in urine was $14.47{\mu}g/l(6.90{\sim}28.00{\mu}g/l)$ in planting, $4.63{\mu}g/l(0.24{\sim}43.00{\mu}g/l)$ in fabricated metal product, $5.93{\mu}g/l(1.00{\sim}33.00{\mu}g/l)$ in dyestuff, $11.09{\mu}g/l(0.80{\sim}48.00{\mu}g/l)$ in leather, $12.41{\mu}g/l(10.10{\sim}41.00{\mu}g/l)$ in other by the type of industry(p<0.001). 4. As the result of nasal specular examination, twenty four cases (8.4%) of nasal septal perforation among 287 total subjects was observed, and there were 17 (9.7%) cases in plating, 4 csaes (14.3%) in dressing and dyeing of leather. In the comparison of chromium concentration in blood and urine between the perforated group and non-perforated group, the perforated group showed a significantly higher value as $1.883{\pm}3.055{\mu}g/dl\;and\;0.793{\pm}0.815{\mu}g/dl$(P<0.001), $21.31{\pm}34.610{\mu}g/L\;and\;9.304{\pm}11.079{\mu}g/L$ (P<0.001). 5. The mean concentration of chromium in blood, urine and the mean level of AST, ALT, Hb and Hct in exposure group were higher than those of control group(p<0.001).

  • PDF

뇌졸중 환자를 위한 가상현실 기반의 원격재활 효과에 관한 체계적 고찰 (A Systematic Review on the Effects of Virtual reality-based Telerehabilitation for Stroke Patients)

  • 임영명;이지용;조성준;안예슬;유두한
    • 대한지역사회작업치료학회지
    • /
    • 제7권1호
    • /
    • pp.59-70
    • /
    • 2017
  • 목적 : 본 연구의 목적은 뇌졸중 환자를 대상으로 가상 현실 기반의 원격재활 효과를 체계적으로 고찰하여 그 효과와 국내 적용방법을 알아보고자 하였다. 연구방법 : 자료의 검색을 위해 EMBASE, CINAHL의 데이터베이스를 이용하였다. 주요 용어는 "Virtual Reality", "Telerehabilitation", "Stroke"으로 관련 연구를 검색하였다. 선정기준에 적합한 총 7편의 연구를 대상으로 질적 수준, 일반적 특성, PICO를 사용하여 연구 주제에 따른 자료를 분석하였다. 결과 : 선정된 7편의 연구는 가상현실 기반으로 한 원격재활 시스템으로 중재를 실시하였으며, 가상현실은 게임 프로그램과 수동적인 팔 보조 그리고 Balance Trainer등을 활용하여 원격재활 중재를 실시하였다. 주된 결과 측정도구는 상지기능, 균형 및 보행, 일상생활 등을 평가하기 위한 도구가 사용되었다. 가상현실 기반의 원격재활 중재방법은 모든 연구에서 상지기능, 균형감각능력에서 효과를 보였으며, 일상생활 활동에서의 부분적인 효과를 확인하였다. 환경적 특이성을 보완하기 위한 원격재활 서비스는 클라이언트의 만족감을 향상시키고 기능의 유지를 위한 중재법으로 그 효과를 확인할 수 있었다. 결론 : 가상현실 기반의 원격재활 시스템은 대부분 상지기능과 균형감각, 일상생활 활동을 위한 중재가 적용되었으며, 가정환경에서도 치료사의 중재, 감독, 교육 등을 통해 기능향상에 도움이 되는 것으로 나타났다. 본 연구는 가상현실 기반의 원격재활의 임상적 적용에 대한 근거와 가능성을 제시하고자 한다. 향후 연구에서 다양한 가상현실의 중재방법과 원격재활을 활용한 재활 프로그램 개발과 같은 추가적인 연구가 필요할 것이다.

대화식 데이터 마이닝 기법을 활용한 자동차 보험사의 인입 콜량 예측 사례 (A Case Study on Forecasting Inbound Calls of Motor Insurance Company Using Interactive Data Mining Technique)

  • 백웅;김남규
    • 지능정보연구
    • /
    • 제16권3호
    • /
    • pp.99-120
    • /
    • 2010
  • 최근 고객들의 비대면 접점 서비스 이용도가 높아짐에 따라, 비대면 채널은 다양한 데이터의 분석을 통해 고객 만족도를 향상시킬 수 있는 유용한 창구로 인식되고 있다. 이러한 비대면 채널의 대표적 영역으로 콜센터를 들 수 있으며, 콜센터 운영에서 고객 만족도에 가장 큰 영향을 미치는 요소는 상담 인력의 규모인 것으로 알려져 있다. 즉, 일정수준 이상의 고객 만족도를 유지하기 위해서는 충분한 상담 인력을 확보하는 것이 관건이지만, 불필요하게 많은 인력을 확보하는 것은 인건비 측면에서 비용의 낭비를 초래할 수 있다. 따라서 부족하지도 않고 넘치지도 않을 정도의 적정 인력을 산출하는 능력은 콜센터 운영의 핵심 경쟁력으로 인식되고 있으며, 최근 콜센터에서는 적정 인력의 규모를 예측하기 위해 WFM(Work Force Management) 업무 전담 부서를 설치하고 콜량을 정확하게 예측하기 위한 노력을 기울이고 있다. 콜량 예측을 위해 현업에서 주로 사용되는 방법은 담당자의 직관에 의존하는 방법으로, 일정기간의 콜량 평균을 담당자가 주관적 판단에 의해 보정함으로써 이루어진다. 하지만 이러한 방식은 담당자의 주관적 성향에 크게 좌우된다는 한계를 갖고 있어서, 최근에는 다양한 예측 모형을 시스템화한 WFMS(Workforce Management System) 패키지가 널리 활용되고 있다. 하지만 이 시스템은 초기 도입 시 매우 고가의 구축비용이 발생하며, 신규 요인 발굴 시 이를 즉각적으로 시스템에 반영하기 어렵다는 한계점을 갖고 있다. 이를 극복하기 위해 본 연구에서는 데이터 마이닝의 대화식 의사결정나무 기법을 이용함으로써, 객관적이면서도 업무 배경 지식을 충분히 활용할 수 있는 예측 모형을 수립하고자 한다. 또한, 본 연구에서 수립한 모형의 정확성 평가를 위해, 국내 최대 규모의 한 자동차 보험사 콜센터의 4년 8개월 간의 실 데이터를 사용한 실험을 수행하고 그 결과를 제시하였다. 실험에서는 기존의 WFMS와 본 연구에서 제안하는 두 가지 모형인 대화식 의사결정나무 기반의 예측 모형, 일반 의사결정나무 기반의 예측 모형의 세 가지 모형에 대해, 다양한 오차 허용범위 하에서의 사고콜 및 고장콜에 대한 예측 적중률을 평가하였다.

광중합 복합레진의 중합초기 동적 점탄성의 변화 (THE CHANGE OF THE INITIAL DYNAMIC VISCO-ELASTIC MODULUS OF COMPOSITE RESINS DURING LIGHT POLYMERIZATION)

  • 김민호;이인복
    • Restorative Dentistry and Endodontics
    • /
    • 제34권5호
    • /
    • pp.450-459
    • /
    • 2009
  • 본 연구의 목적은 새로 개발한 점탄성 측정기를 사용하여 수종의 광중합 복합레진의 초기 동적 점탄성 변화를측정하는 것이다. 본 연구에 사용된 점탄성 측정기는 세 부분으로 구성되었다. 첫째, 시편이 놓여지는 parallel plates; 둘째, DC 모터와 크랭크로 이루어진 회전진동전단변형 (Oscillatory shear strain)을 발생시키는 부분; 셋째, 전자기적 토크센서를 이용한 응력 측정 부분으로 구성되었다. 본 점탄성 측정기는 최대 2 Ncm의 토크를 측정할 수 있으며, 광중합기의 스위치는 컴퓨터와 연동하여 데이터 획득을 시작할 때 동시에 켜지도록 하였다. 본 연구에서는 시판 중인 6종의 광중합 복합레진 [Z-100 (Z1), Z-250 (Z2), Z-350 (Z3), DenFil (DF), Tetric Ceram (TC), Clearfil AP-X (CF)]을 사용하였다. 점탄성 측정기를 사용하여 동적 회전전단실험을 시행하였다. 직경 3 mm인 유리막대로 구성된 parallel plates 사이에 $14.2\;mm^3$의 복합레진을 적용시켰으며, 6 Hz의 진동수와 0.00579 rad의 진폭으로 변형을 가하고 발생된 응력을 측정하였다. 광중합이 시작됨과 동시에 측정이 시작되었으며, 광중합 후 10초 동안 점탄성의 변화를 관찰하였다. 각 복합레진에 대해 5 회 반복하여 측정하였고, 실험은 $25{\pm}0.5^{\circ}C$에서 진행되었다. 측정된 변형-응력 곡선으로부터 복소전단탄성계수 G*, 저장전단탄성 계수 G', 손실전단탄성 계수 G"를 구하였고 G*가 10 MPa에 이르는 시간을 구하였다. 각 재료의 복소전단탄성계수 G*와 10 MPa에 이르는 시간에 대해 일원분산분석 (One-way ANOVA)과 사후검정 (Tukey 검정)을 시행하였다 (${\alpha}$= 0.05). 결과는 다음과 같다. 1.본 연구를 위해 제작한 점탄성 측정기는 광중합 복합레진의 중합 초기 10초 동안의 동적 점탄성 변화를 신뢰성 있게 측정 할 수 있었다. 2. 모든 복합레진은 광조사 개시 후 $1{\sim}2$초의 불응기를 지난 다음 급격한 전단탄성계수의 증가를 보였다. 3. 모든 복합레진은 광중합 10 초간 손실전단탄성계수보다 저장전단탄성계수의 높은 증가를 보였다. 4. 광중합 초기 10초 후 복소전단탄성계수 값은 $150.3{\sim}563.7\;MPa$로, Z-100이 가장 높았고, 그 다음 Clearfil, Z-250, Z-350, Tetric Ceram, DenFil의 순이었다. 5. 복소전단탄성계수가 10 MPa에 이르는 시간은 Z-100이 2.55초로 가장 빨랐고, DenFil이 4.06초로 가장 느렸다.

반복 굽힘 스트레스 하에서 전동식 니켈-티타늄 파일의 단면적의 크기가 피로파절에 미치는 영향 : 파절역학 분석 (EFFECT OF CROSS-SECTIONAL AREA OF 6 NICKEL-TITANIUM ROTARY INSTRUMENTS ON THE FATIGUE FRACTURE UNDER CYCLIC FLEXURAL STRESS: A FRACTOGRAPHIC ANALYSIS)

  • 황수연;오소람;이윤;임상민;금기연
    • Restorative Dentistry and Endodontics
    • /
    • 제34권5호
    • /
    • pp.424-429
    • /
    • 2009
  • 본 연구의 목적은 니켈 티타늄 전동파일의 피로 파절에 파일의 단면 형태가 미치는 영향을 평가하고자 하였다. 6 종의 ProFile (Dentsply), Mtwo (VDW), K3 (SybronEndo), Heroshaper (MicroMega), NRT (Mani), Alpha system (KOMET) 니켈-티타늄 전동 파일(ISO 30 size/.04 taper)을 각 10개씩 실험군으로 배정하고 실험을 진행하였다. 니켈 티타늄 전동파일에 반복적인 장력과 압축력을 재현시킬 수 있는 피로파절 실험기(Denbotix)와 연결된 토크 조절 전동모터(Aseptico)에 각 군의 파일을 연결하여 300rpm 속도로 만곡도가 60도이고 5mm의 반경을 가진 인공 금속 근관 내를 6 mm pecking depth로 작동시켰다. 각 파일의 파절시간을 측정하고 통계 분석하여 유의성을 분석하였으며, 각 군의 파절된 모든 파일의 파절면을 주사전자현미경을 이용한 fractographic analysis를 통해 파절 역학을 규명하였다. 또한 각 군에서 3개의 사용하지 않은 새 파일을 clear resin에 매몰하고tip에서부터 3mm 지점을 횡절단하여 Image-Pro Plus (Imagej 1.34n, NIH) 소프트웨어로 절단면의 단면적을 측정하고 단면적의 크기와 피로 파절과의 상관성도 평가하였다. 실험 결과 NRT와 ProFile이 다른 실험군에 비해서 유의성 있게 높은 피로 파절 저항성을 보였다(P < .05). 또한 파일의 단면적은 피로파절 저항성과 통계학적인 유의성은 보이지 않았다. Fractographic analysis 결과 모든 시편에서 파절면은 ductile fracture와 brittle fracture가 혼재된 양상으로 나타났다. 결론적으로 니켈 티타늄 전동 파일의 단면적의 크기는 피로파절 저항과는 상관성이 적었다.

Mtwo 전동 파일을 사용한 single length technique과 crown-down technique의 근관성형 효율 비교 (Comparison of shaping ability between single length technique and crown-down technique using Mtwo rotary file)

  • 임유경;박정길;허복;김현철
    • Restorative Dentistry and Endodontics
    • /
    • 제32권4호
    • /
    • pp.385-396
    • /
    • 2007
  • 이 연구의 목적은 Mtwo 전동 파일의 사용에 있어서 제조사가 제안한 single length technique과 crown-down technique의 근관성형효율과 안전성을 비교하고 Mtwo 전동 파일의 변형된 사용방법을 제안하고자 하는 것이다. 기구의 종류와 사용방법에 따라 60개의 레진 블록 근관 모형 (Endo Training Bloc; Benstply Maillefer, Ballaigues, Switzerland)을 세 군으로 나누어 20개씩 표본을 성형하였다. MT군은 Mtwo 파일 (VDW, Munich, Germany)을 제조사의 추천방법인 single length technique으로, MC군은 Mtwo 파일을 crown-down technique으로 형성하였고, 대조군인 PT군은 ProTaper (Denstply Maillefer, Ballaigues, Switzerland)를 사용하였다. 모든 기구는 250 r.p.m., torque 2.2 N로 고정한 전동 모터 (X-smart; Denstply Maillefer, Ballaigues, Switzerland)로 사용하였다. 근관 성형 후, 스캐너로 근관 형성 전후의 이미지를 채득하여 중첩 비교함으로써 근단부로부터 1, 2, 3, 4, 5, 6, 7, 8 mm 높이에서의 중심변위율을 산출하였다. 순수 기구조작 시간 및 기구조작 동안의 binding빈도를 기록하였다. 근관 성형 후, 레진 블록의 무게 감소를 측정하였고 근관 성형에 사용된 파일의 파절이나 변형 및 근관 성형 후 형태의 이상을 조사하였다. 세 실험군의 측정 및 산출된 자료를 일원배치 분산분석 및 Duncan's Multiple Range Test로 사후 검정을 시행하여 비교하였으며, Fisher's exact test으로 근관의 이형성, 기구의 변형 그리고 기구 binding 등 발생 빈도를 유의 확률 95%에서 통계 검정하였다. 그 결과는 다음과 같다. 1. 근관의 만곡도 감소, 중심변위율, 레진 블록의 무게 감소, 기구 변형 등은 세 군간에 유의한 차이가 없었다 (p > 0.05). 2. 기구 조작 시간은 보면 MT군과 MC군이 PT군보다 짧았다 (p < 0.05). 3. Elbow는 MT군이 MC군에서 PT군보다 더 많이 형성되었다 (p < 0.05). Ledge는 세 군 모두에서 나타나지 않았다. 4. 파일 binding 횟수는 MC군이 가장 적고 PT군이 가장 많았다 (p < 0.05). 이상의 결과를 볼 때, Mtwo 전동 파일을 crown-down technique으로 사용하는 것이 single length technique과 유사한 성형 효율을 보이면서도 더 안전할 것으로 추정된다.

관상동맥 우회수술후 신경계 합병증의 위험인자 (Risk Factors of Neurologic Complications After Coronary Artery Bypass Grafting)

  • 박계현;채헌;박충규;전태국;박표원
    • Journal of Chest Surgery
    • /
    • 제32권9호
    • /
    • pp.790-798
    • /
    • 1999
  • 배경: 최근 관상동맥 우회수술의 조기 성적이 향상됨에 따라 뇌 경색을 비롯한 신경계 합병증이 수술 후 경과를 결정하는 중요한 합병증으로서 비중이 증가하고 있다. 이에 본 연구에서는 관상동맥 우회수술 후에 발생하는 신경계 합병증의 발생 양상을 분석하고 그 위험인자를 규명하고자 하였다. 대상 및 방법: 관상동맥 우회수술을 시행받은 351명의 환자를 대상으로 신경계 합병증의 발생 여부와 형태, 위험인자를 분석하였다. 신경계 합병증은 새로운 뇌 경색이 확진된 경우와 수술후 의식 및 지남력의 완전한 회복이 24시간 이상 지연된 경우로 정의하였다. 결과: 대상 환자중 18명(5.1%)에서 신경계 합병증이 발생하였으며 그 중 뇌 경색이 확진된 환자는 9명(2.6%)이었다. 운동마비를 동반한 뇌 경색이 4명에서 발생하였고 4명은 정신 지체나 지남력 장애의 형태로 나타났으며 뇌사 판정을 받은 환자가 1명 있었다. 나머지 9명은 뇌 경색의 증거는 발견되지 않았으나 의식 및 지남력의 완전 회복이 지연된 환자들이었다. 통계적 분석 결과 180분 이상의 심폐 바이패스, 수술중 상행 대동맥의 죽상경화반이 진단된 경우, 초음파 검사로 진단된 경동맥 협착, 뇌졸중이나 일과성 뇌허혈의 과거력 등이 단변량 및 다변량 분석 모두에서 의미있는 위험인자로 분석되었다. 그밖에 고령(65세 이상), 흉부 단순 촬영상 대동맥의 석회화가 발견된 경우, 수술중 심근 경색 등도 단변량 분석시 의미있는 위험인자였다. 대동맥궁 삽관이나 single clamp technique 등 신경학적 합병증의 예방에 기여할 것으로 기대되었던 수술 수기상의 변형은 합병증 발생 빈도에 별다른 영향을 미치지 않은 것으로 분석되었으며 경동맥 협착의 정도 역시 합병증 발생 빈도와 상관관계가 없었다. 결론: 이상의 결과로 관상동맥 우회수술 후의 신경계 합병증의 발생 원인은 복합적이긴 하지만 근본적으로는 동맥계의 동맥경화성 병변과 밀접한 관계가 있음을 확인하였다. 따라서 합병증의 예방을 위해서는 수술전 동맥경화성 병변에 대한 전신적인 평가와 함께 고위험군 환자들의 경우 적극적인 수술 수기의 변형을 검토할 필요가 있다고 판단된다.

  • PDF

Management of Patients with Traumatic Rupture of the Diaphragm

  • Hwang, Sang-Won;Kim, Han-Yong;Byun, Jung-Hun
    • Journal of Chest Surgery
    • /
    • 제44권5호
    • /
    • pp.348-354
    • /
    • 2011
  • Background: Traumatic rupture of the diaphragm is an unusual type of trauma. In addition, it is difficult to diagnose because it can be accompanied by injuries to other organs. If it is not detected early, the mortality rate can increase due to serious complications. Diaphragmatic rupture is an important indicator of the severity of the trauma. The aim of this study was to investigate the factors affecting the incidence of complications and mortality in patients who had surgery to treat traumatic rupture of the diaphragm. Materials and Methods: The subjects were patients who had undergone a diaphragmatic rupture by blunt trauma or stab wounds except patients who were transferred to other hospitals within 3 days of hospitalization, from January 2000 to December 2007. This study was a retrospective study. 43 patients were hospitalized, and 40 patients were included during the study period. Among them, 28 were male, 12 were female, and the average age was 42 (from 18 to 80). Outcome predictive factors including hypoxia, ventilator application days, revised trauma score (RTS), injury severity score (ISS), age, herniated organs, complications, and the mortality rate were investigated. Results: Causes of trauma included motor vehicle crashes for 20 patients (50%), falls for 10 (25%), stab wounds for 8 (20%), and agricultural machinery accidents for 2 (5%). Most of the patients (36 patients; 90%) had wound sites on the left. Diagnosis was performed within 12 hours for most patients. The diaphragmatic rupture was diagnosed preoperatively in 27 patients (70%) and in 12 patients (30%) during other surgeries. For surgical treatment, thoracotomy was performed in 14 patients (35%), laparotomy in 11 (27.5%), and a surgery combining thoracotomy and laparotomy in 15 patients (37.5%). Herniated organs in the thoracic cavity included the stomach for 23 patients (57.5%), the omentum for 15 patients (37.5%), the colon for 10 patients (25%), and the spleen for 6 patients (15%). Accompanying surgeries included splenectomy for 13 patients (32.5%), lung suture for 6 patients (15%), and liver suture for 5 patients (12.5%). The average hospital stay was $47.80{\pm}56.72$ days, and the period of ventilation was $3.90{\pm}5.8$ days. The average ISS was $35.90{\pm}16.81$ (11~75), and the average RTS was $6.46{\pm}1.88$ (1.02~7.84). The mortality rate was 17.5% (7 patients). Factors affecting complications were stomach hernia and age. Factors affecting the mortality rate were ISS and RTS. Conclusion: There are no typical symptoms of the traumatic rupture of the diaphragm by blunt trauma. Nor are there any special methods of diagnosis; in fact, it is difficult to diagnose because it accompanies injuries to other organs. Stab wounds are also not easy to diagnose, though they are relatively easy to diagnose compared to blunt trauma because the accompanying injuries are more limited. Suture of the diaphragm can be performed through the chest, the abdomen, or the thoracoabdomen. These surgical methods are chosen based on accompanying organ injuries. When there are many organ injuries, there are a great number of complications. Significant factors affecting the complication rate were stomach hernia and age. ISS and RTS were significant as factors affecting the mortality rate. In the case of severe trauma such as pelvic fractures, frequent physical examinations and chest X-rays are necessary to confirm traumatic rupture of the diaphragm because it does not have specific symptoms, and there are no clear diagnosis methods. Complications and the mortality rate should be reduced with early diagnosis and with treatment by confirming diaphragmatic rupture in the thoracic cavity and the abdomen during surgery.

입지계층분석을 활용한 산업단지 유치 업종 결정에 관한 연구 (A Study of on the Method to Select Manufacturing Activities Sensitive to Regional Characteristics by Analyzing the Locational Hierarchy)

  • 소진광;이현주;김선우
    • 토지주택연구
    • /
    • 제2권4호
    • /
    • pp.559-568
    • /
    • 2011
  • 이 연구는 입지계층 분석을 활용하여 특정 산업단지에 유치 가능한 업종을 도출하는 과정을 제시하고자 한다. 입지계층분석은 경제활동별 입지분포 특성을 도시인구의 순위규모 분포산식을 원용하여 경제활동의 입지변화 추세를 파악하는 것이다. 입지계층분석의 결과를 바탕으로 입지계층의 유형을 구분하고 유형별로 유치가 적절한 지역을 소개한다. 분석의 공간단위는 기초지방자치단체(시 군)를 사용하고, 분석의 업종단위는 산업 중분류에 따른다. 분석에 활용된 업종별 입지분포는 1990년부터 최근까지로, 분석대상은 광업 제조업통계조사의 종사자수 통계자료이다. 입지계층분석의 결과를 바탕으로 지역특성에 적합한 산업단지 유치업종을 결정하는 방법을 소개한다. 성장형 추세를 보이는 업종은 전자부품 영상음향 통신장비제조업, 의료 정밀 광학기기 및 시계제조업, 자동차제조업이다. 이런 업종은 적절한 관련 기반시설만 주어진다면 대부분의 지역에서 유치가 가능한 업종이다. 쇠퇴형 입지계층 업종은 담배제조업, 비금속광물제품 제조업, 의복 악세서리 모피제조업, 목제 및 나무제품 제조업 등이다. 그러나 성장형이냐 쇠퇴형이냐는 지역의 특성에 따라 다르며 시간이 지나면서 그 경향이 달라진다. 분산형 입지계층의 업종은 식료품제조업, 화학제품제조업, 비금속광품제조업, 금속가공제조업, 전자부품 영상 통신장비제조업, 석유제품제조업이다. 이런 특성의 업종은 적절한 관련 기반시설의 제공 없이도 비숙련 노동력의 제공이 가능한 지역이라면 유치가 가능한 업종이다. 재집중형 입지계층으로 간주되는 업종은 섬유제품제조업, 의복제조업, 기타 운송장비 제조업이다. 전반적으로 이런 업종은 기존 집적지를 중심을 선호하는 특성을 보이며 주로 대도시 재집중형 경향을 보이고 있으므로 중소도시나 낙후지역에서는 정책적 유인책을 제시하더라도 비효율적이며 유치가능성이 낮은 업종이다. 이러한 입지계층의 특성을 반영하여 유치 업종을 선별하고 산업단지의 개발계획을 수립할 경우, 사업용지 공급정책의 효율성과 효과성을 높일 수 있다.

Integrated Rotary Genetic Analysis Microsystem for Influenza A Virus Detection

  • Jung, Jae Hwan;Park, Byung Hyun;Choi, Seok Jin;Seo, Tae Seok
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.88-89
    • /
    • 2013
  • A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.

  • PDF