• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.165-170
• /
• 2005

Sol-gel methods offer many advantages over conventional slip-casting, including the ability to produce ceramic membranes. They are purer, more homogeneous, more reactive and contain a wider variety of compositions. We produced ormosil sol using sol-gel process under various molecular weight of polymer species[polyethylene glycol(PEG)] in total system [Tetraethyl ortho silicate(TEOS)-polyethylene glycol(PEG)]. The properties of as-prepared ormosil sol such as viscosity and gelation time are characterized. Also, the ceramic membrane was prepared by dip-coating with synthetic sol and its microstructure was observed by scanning electron microscopy. The permeability and rejection efficiency of membrane for oil/water emulsion were evaluated as cross­flow apparatus. The ormosil sol coated membrane was easily formed by steric effect of polymer and it improved flux efficiency because infiltration into porous support decreased. Its flux efficiency was elevated about $200\;l/m^2h$ compared with colloidal sol coated membrane at point of five minutes from starting test.

• Membrane and Water Treatment
• /
• v.1 no.3
• /
• pp.207-214
• /
• 2010

Approximately 80% of water used in urban areas reappears as municipal wastewater (MWW). Reclamation of MWW is an attractive proposition under the present scenario of water stressed cities in India. In this paper, we attempted to reclaim MWW using lab-scale hollow- fiber (HF) membrane modules for possible reuse in non-potable applications. Experiments were conducted to evaluate the efficiency of virgin HF ($M_1$) and modified HF ($M_2$) modules. The $M_2$ module consists of HF modified with a skin layer formed through interfacial polymerization of m-phenylenediamine with trimesoyl chloride (MPD-TMC). The molecular weight cut-off (MWCO) of $M_1$ was 44000 g/mol and that of $M_2$ 10000 -14000 g/mol on the basis of rejection of polyethylene glycol. The combination of $M_1$ and $M_2$ modules was able to reduce concentrations of most of the pollutants in sewage and improved the treated water quality to the acceptable limits for non potable reuse applications. It is found that about 98-99% of the initial flux is recovered by the backwashing process, which was approximately two times in a month when operated continuously.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.1
• /
• pp.95-106
• /
• 2020

The purpose of this study was to determine the effects of coniferous essential oils (EOs) blended films on insect repellence and crop productivity. Low-density polyethylene (LDPE) film is widely used, especially in agriculture and for food packaging. Ethylene vinyl acetate was blended with LDPE to reduce volatilization of EOs. An EO from Japanese cypress (Chamaecyparis obtusa) was incorporated into the blend film to conduct field research on antimicrobial and insect repellent properties. Among the various concentrations of EO, the highest concentration (2.5%) showed the highest efficiency in terms of pesticidal activity. The ability to inhibit microbial growth can be explained by the lipophilic properties of the EO component, and many studies have already demonstrated this. Agricultural films containing all types of EO have been tested on various crops such as chili, cucumber, Korean melon and have been able to verify their effectiveness in avoiding pests and increasing yields. From these results, it was found that it is reasonable to use a modified film such as a composite film containing an EO for agriculture. Thus, the modified film containing EO has undoubtedly shown impressive potential for reducing the use of pesticides in a variety of ways, not only for agricultural mulching film but also for food and agricultural product packaging. This product is an environmentally friendly chemical and is safe for agricultural and industrial and food packaging applications, among others. In particular, the use of agricultural films significantly reduces the use of pesticides, suggesting that farmers can increase their incomes by reducing working hours and costs, and increasing production.

• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.376-381
• /
• 1992

In order to study the effect of modified atmosphere storage on extending shelf life of mushrooms, oyster mushroom and Shiitake were wrapped with polyethylene film (PE, $50\;{\mu}m$), and stored at $0.5^{\circ}C$. Mushrooms packed with conventional hardboard box (4kg) lost marketability within $5{\sim}6$ days due to weight loss, shrinkage, browning, spore formation and/or mycellium growth. PE-packing could prevent or retard the deterioration of the mushrooms in the aspects of appearance, texture, discoloration, and microbial contamination. This situation can be best characterized by the reduced respiration rate resulted from the elevated level of carbon dioxide and the reduced level of oxygen in the bag. Although the appearance of the oyster mushroom was maintained for one month, its shelf life was limited to 15 days because of tissue softening. Discoloration of the pileus of shiitake mushroom appears to be the most important factor to determine its marketability. For example, extension of shelf life of Dongo was limited to 15 days, principally due to the browning of the pileus. Shelf life of Hawgo whose color of the pileus changed little over the experimental period, however, could be extened to more than one month.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.5
• /
• pp.235-240
• /
• 2014

Nanocomposites made of linear low density polyethylene (LLDPE) and organo-modified montmorillonite (O-MMT) were processed by melt compounding from a commercially available premixed LLDPE/nanoclay masterbatch, at different nanoclay loadings, by co-rotating twin-screw extruder. The morphological and dielectric properties of LLDPE/O-MMT nanocomposites were investigated to understand the structure-dielectric properties relationship in the nanocomposites. The microstructures of the materials were characterized by wide angle X-ray diffraction (WAXD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). Initial findings by FTIR spectroscopy characterization indicated the absence of any chemical interaction between LLDPE and nanoclay during the extrusion process, while DSC showed that a 1% wt loading of nanoclay particles increased the degree of crystallinity of the nanocomposites samples. On the other hand, XRD, SEM, TEM and AFM indicated that nanoclay layers were intercalated or exfoliated in the LLDPE matrix. A correlation between the structure and dielectric properties of LLDPE/O-MMT nanocomposites was found and discussed.

• Tribology and Lubricants
• /
• v.20 no.5
• /
• pp.237-244
• /
• 2004

Micro/nano tribological characteristics of PTFE coating films were experimentally studied. PTFE (polytetrafluoroethylene) modified polyethylene and low molecular weight PTFE were used as a coating materials. These films were deposited on Si-wafer (100) by IBAD (ion beam assisted deposition) method. The Ar ion beam sputtering was performed to change the surface topography of films using a hollow cathode ion gun under different Ar ion dose conditions in a vacuum chamber. Micro/nano tribological characteristics, water wetting angles and roughness were measured with a micro tribotester, SPM (scanning probe microscope), contact anglemeter and profilometer, respectively. The durability of the films were measured with macro tribotester. Results showed that the PTFE coating surfaces were converted to hydrophobic. The water contact angle of coated surfaces and surface roughness increased with the coating thickness. Adhesion and friction in micro and nano scale were governed by magnitude of normal load in soft material such as PTFE films. As the increase of sputtering time on low molecular weight PTFE films, the surface roughness was increased and nano adhesion and friction were decreased. The nano tribological characteristics of surfaces are mainly improved by chemical modification such as PTFE coating and given a synergy effect by the physical modification such as topographic modification.

• Food Science and Preservation
• /
• v.2 no.2
• /
• pp.225-232
• /
• 1995

In order to study the effect of modified atmosphere packaging(M.A.P.) and controlled atmosphere(C. A.) storage on keeping freshness of mushrooms (Agricus-bisporus). Mushrooms was packaged with polyethylene(P.E.) film (40${\mu}{\textrm}{m}$, 60${\mu}{\textrm}{m}$, 80${\mu}{\textrm}{m}$) and C.A. conditions(CO2 concentration of 2%, O2 concentration of 2%) and storage at 0$\pm$1$^{\circ}C$, RH(relative hummidity) 92$\pm$1%. Gas composition in film was changed rapidly at early of storage, but it kept a constant level after 14 days of storage, and then kept at the level of 6~9% CO2 and 2~5% O2. Weight loss was 5% in non-packed mushrooms after 3 days of storage, but P.E. film, CO2 treated, C.A. conditions were 5% after 21 days of storage. Flesh firmness of the mushrooms was continuously decreased throughout storage period and the lowest of flesh firmness changed was 80${\mu}{\textrm}{m}$-P.E. film packing. Discoloration of the piteous of mushrooms appears to be the most Important factors to determine its marketability, L value of it appears to be of the high values at P.E. film packing and C.A. conditions during period. Large amount of ethanol and acetaldehyde were produced from the 7 days during storage, large contents of mannitol and trehalose were at the 14 days and 7 days during storage.

• Microbiology and Biotechnology Letters
• /
• v.46 no.3
• /
• pp.269-276
• /
• 2018

Rabies virus (RABV)-specific antibodies in animals and humans are measured using standard methods such as fluorescent antibody virus neutralization (FAVN) tests and rapid fluorescent focus inhibition tests, which are based on cell culture systems. An alternative assay that is safe and easy to perform is required for rapid sero-surveillance following mass vaccination of animals. Two purified monoclonal antibodies (4G36 and B2H17) against RABV were selected as capture and detection antibodies, respectively. A genetically modified RABV, the ERAGS strain, was propagated and concentrated by polyethylene glycol precipitation. Optimal conditions for the RABV antigen, antibodies, and serum dilution for a blocking enzymelinked immune sorbent assay (B-ELISA) were established. We evaluated the sensitivity, specificity, and accuracy of the B-ELISA using serum samples from 138 dogs, 71 raccoon dogs, and 25 cats. The B-ELISA showed a diagnostic sensitivity of 95.8-96.3%, specificity of 91.3-100%, and accuracy of 96.0-97.2% compared to the FAVN test. These results suggest that the B-ELISA is useful for sero-surveillance of RABV in dogs, raccoon dogs, and cats.

• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.231-238
• /
• 1998

The effects of temperature(0, 5, 10 $^{\circ}C$), sawdust removal in root part and packaging conditions on the respiration and keeping qualities were evaluated. Higher respiratory activity, weight loss and stipe elongation were observed at higher temperature. Removal of sawdust part slowed down the rate of stipe elongation with little effect on the respiration rates, and therefore improve the quality preservation. The modified atmosphere packaging of 100g mushroom using hermetically sealing by 30 $\mu\textrm{m}$ polypropylene (CPP) and low density polyethylene (LDPE) films were effective in preserving the quality such as visual appearance and Hunter L value, and reducing weight loss at 0$^{\circ}C$, 5$^{\circ}C$ and 10$^{\circ}C$ compared to perforated packages.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1353-1361
• /
• 2013

The objectives of this paper are the characterization of the pretreatment of wastewater by microfiltration (MF) membranes for river maintenance and water recycling. This is done by investigation of the proper coagulation conditions, such as the types and doses of coagulants, mixing conditions (velocity gradients and mixing periods), pH, etc., using jar tests. The effluent water from a pore control fiber (PCF) filter located after the secondary clarifier at Kang-byeon Sewage Treatment Plant (K-STP) was used in these experiments. Two established coagulants, aluminum sulfate (Alum) and poly aluminum chloride (PAC), which are commonly used in sewage treatment plants to treat drinking water, were used in this research. The results indicate that the optimal coagulation velocity gradients (G) and agitation period (T) for both Alum and PAC were 200-250 $s^{-1}$ and 5 min respectively, but the coagulation efficiencies for both Alum and PAC were lower at low values of G and T. For a 60 min filtration period on the MF, the flux efficiencies ($J/J_0$ (%)) at the K-STP effluent that were coagulated by PAC and Alum were 92.9 % and 79.9 %, respectively, under the same coagulation conditions. It is concluded that an enhanced membrane process is possible by effective filtration of effluent at the K-STP using the coagulation-membrane separation process.