• 한국항공우주학회지
• /
• 제32권10호
• /
• pp.127-133
• /
• 2004

본 논문은 무인항공기의 자동비행을 위한 이동형 지상제어 시스템 개발에 관한 연구이다. 본 연구에서는 휴대와 이동을 수월하게 하기 위한 이동형 지상제어시스템 (PGCS)을 개발하였다. 일반적으로 지상제어시스템은 항공기가 수행해야할 임무정보를 전송하고, 원활한 조종을 위하여 항공기 위치, 자세, 상태, 항법 정보를 항공기로부터 실시간 수신할 수 있어야 한다. 이동형 지상제어시스템 구성은 노트북 컴퓨터, 지상제어시스템과 항공기간의 통신을 위한 모뎀, 입/출력 보드, 무선조종 수신기 그리고 여러 개의 스위치와 LED 램프로 구성된다. 소형 무인항공기를 이용한 비행시험으로서 본 연구에서 개발한 이동형 지상제어시스템 성능 검증을 수행하였다.

• 오토저널
• /
• 제25권4호
• /
• pp.74-82
• /
• 2003

Future emission legislation requirements especially the need for CO$_2$ reduction lead to more complex powertrain concepts with an increasing number of independent parameters to be calibrated. For gasoline engines concepts with variable valve timing, direct injection or variable charge motion are in development or already on production. Diesel engines with common rail systems offer a wide range of new injection strategies, the application of new exhaust aftertreatment systems leads to additional complexity. Furthermore a clear trend to highly sophisticated transmission concepts requires a perfect interaction of all powertrain components. While the higher complexity requires increasing test and development effort, the development duration is reduced significantly. Consequently, the potential of such systems cannot be fully utilised by traditional development and calibration approaches within the given timeframe. By introduction of intelligent methodologies f3r the calibration of modem powertrains the development becomes more efficient, faster and better in quality. However, even with standardised and automated calibration methods a differentiated brand-specific powertrain character has to be maintained comparable to a "handmade" calibration performed by highly experienced experts.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권5호
• /
• pp.579-586
• /
• 2005

Recently, it has demanded to the wireless monitoring system in stand-alone PV power generation system. We propose the multiplex monitoring method using RF unit of low-price. RF unit consists of RF modem and communication controller. It is also able to use by repeater to communicate long distance. In this paper. two algorithms were programmed by CCS-C and C++ for multiplex monitoring method, The algorithm of choosing unit was used 'select and poll method' and the course assignment algorithm was embodied with 'Bellman-Ford algorithm'. The good result was achieved in the actual test without communication-data lose. The proposed method will be applied such as monitoring system of PV light on the wayside, monitoring system of unmanned lighthouse, monitoring system of refrigeration container on vessel and so on. It can be applied in the field that various ocean energy system.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.192-196
• /
• 2010

Due to a development of a modem technology as Power Line Communication(PLC) over 200 Mbps, the high-speed multi-media data trasmission could be currently possible. The strength of the PLC has no more additional wiring work. PLC has also possible to high quality data transmission with currently electrical cable. It has a various strong point campare with existing wire and wireless communication technologies. In This paper we develop a high quality media transmitter-receiver based on merging the HomePlug AV, which is 200 Mbps class PLC technology and HDMI Interface technology. The video function was used for the VEDEO TEST GENERATOR in order to a property valuation. Smart Live 6 software were used for the assessment of audio property. As the result of measurement of the HD class images by capturing from the receiver of the PLC, the quality of images couldn't be confirm any deterioration, which has compared with original reflections. In case of audio part as the result of confirmation of the Phase, Magnitude, it has been confirmed that over 90% of nomal transmition and receiving of acoustic signal. It can be possible to have HD class Media service through the PLC.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1599-1605
• /
• 2011

From now on, power line communication was made use of controling using 450 kHz narrow band, but as the PLC technology developing, in the near future get to the commercial step that is broadband PLC upto 30 MHz. In this paper, analyze the possibility of moving picture transmission for adapting surveillance camera which is among of the application of PLC. To analyze characteristics of channel, estimate the noise and impedance of lab, office, home. In case of noise, there is no problem to communicate each other because of 20 ~ 50 dB gain. In case of impedance, average impedance is about 100 ohm, it satisfy standards of designing modem but because max and min values get out of expectation there are some problem to acquire fully capacity of modems. Its condition is the same as transmission of multimedia data. In this test as more packets, as more handling rate, in lab, for the case that transmit 1,518 byte as the speed of 6 Mbps handling rate is upto 100%, it means possibility of moving picture transmission as the 6 Mbps speed. For delayed time there is no relationship about transmitted packets. As a result, there is no problem about applying surveillance camera via the PLC. And more cameras can work within PLC for considering the number of transmitted frames.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.115-123
• /
• 2003

With the advent of high performance computers and more efficient numerical algorithms, computational fluid dynamics(CFD) has come out as a modem alternative for reducing the use of wind tunnels test in automotive engineering. However, in spite of the fact that many competent researchers have made all their talents in developing turbulence model over since the past dozen or more years, it has been an important impediment in using the CFD effectively to design machinery and to diagnose or to improve engineering problems in the industry since the turbulence model has been acting as the Achilles' tendon in aspect of the reliability even to this time. In this study, Reynolds-averaged Wavier-Stokes equations were solved to simulate an incompressible turbulent flow around a bus-like bluff body near ground plane. In order to investigate the effect of the discretisation schemes and turbulence model on the aerodynamic forces several turbulence models with five convective difference schemes are adopted. From the results of this study, it is clear that choice of turbulence model and discretisation scheme profoundly affects the computational outcome. The results also show that the adoption of RNG $k-\varepsilon$ turbulence model and nonlinear quadratic turbulence model with the second order accurate discretisation scheme predicts fairly well the aerodynamic coefficients.

• 한국생활과학회지
• /
• 제14권5호
• /
• pp.813-820
• /
• 2005

The beauty itself cannot be changed by the time, but the concept of the beauty can be influence by the time and cultural background. The purpose of this study is to analyze the beautiful faces or ugly faces among the young women and to provide useful guideline to make up for the modem concept of beauty. The facial photographs of 180 adlut women(aged between 20 and 29) in Pusan and Ulsan area were sampled to be measured and classified as the beautiful or ordinary or ugly faces. Data were analyzed by Frequencies, Mean, Duncan's Multiple Range Test. The major results were as followings; the Beautiful face has a relatively small face with a broad forehead and a small lower face. It also has a wide palpebral fissure, narrow intercanthal distance, a narrow nose and a big mouth. Physiognomic face length was 182.38mm, the upper face length was 59.82mm, the middle face length 60.82mm, the lower face length 61.76mm, and the index of face length to face breadth was 1.35. And also the faces within the figures are considered as the beautiful or ordinary or ugly faces from those measurements like face length/bizygion breadth, intercanthal distance, mouth width, upper vermilion height, lower vermilion height.

• 한국국방경영분석학회지
• /
• 제37권1호
• /
• pp.1-9
• /
• 2011

현대 국방획득 업무에서 계약업체의 관리는 중요한 요소라고 할 수 있다. 국방조달에 있어서 부정당업자의 발생은 무기체계의 전력화에 큰 차질을 유발시켜 획득사업이 원활히 이행되지 못하는 원인을 야기시킨다. 본 논문에서는 인공신경망 모형을 이용하여 국방조달에서 부정당업자를 판별할 수 있는 예측모형을 개발하고자 한다. 모형에 사용된 데이터는 국내 중소 제조기업을 대상으로 구축된 학습용 및 검증용 자료를 활용하여 실증분석 하였다. 본 연구를 통해 제시된 모형의 결과로 사업관리자들의 사업관리 능력을 향상시키고, 견실한 국방조달업체의 진입을 통한 조달질서 확립에 기여를 할 수 있으리라 기대된다.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1728-1737
• /
• 2003

The vertical lathe is a very popular machine tool in modem manufacturing industries because of its small area of installation. The small installation area is highly desirable for the flexibility improvement of the manufacturing systems such as FMS, CIM, and IMS. The vertical lathe, however, has much taller height compared to the traditional horizontal lathe, and consequently more severe vibrations. In this study, the structure of a vertical lathe is analyzed to investigate the dynamic properties and further to establish some ideas of the design alteration for the improved dynamic stability even at the higher operating speed. The simulation model is implemented to apply those design alterations for the optimization. The result of this study is not only prosperous but also ready to be applied to the optimum design of various machine tool structures for the improved stability.

• 한국의류학회지
• /
• 제32권11호
• /
• pp.1771-1781
• /
• 2008

The purpose of this study was to classify the casual image by clothing design elements. This research was done by survey method with 30 kinds of casual image photos selected in fashion magazines. The data was analyzed by Reliability Analysis, Factor Analysis, ANOVA, Duncan's test and MDS. The results of this study are as follows: 1. Casual image was classified by 6 factors. Those were classic-casual, modern-casual, romantic-casual, vintage-casual, sexy-casual and active-casual images. 2. Classic-casual image was well-expressed by A silhouette, fit, chromatic and chromatic color coordinations and hard texture. Modern-casual image was well-expressed by H silhouette, fit and achromatic and achromatic color coordinations. Romantic-casual image was well-expressed by A silhouette, fit and soft texture. Vintage-casual image was well-expressed by H silhouette, combination apparel-fit, chromatic and chromatic color coordinations and fade-out texture. Sexy-casual image was well-expressed by fitted silhouette, tight apparel-fit and combination texture. 3. Casual image was positioned into mostly dynamic and modern on image scale.