• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.22-27
• /
• 2000

This Paper decribes a monitoring system using Modbus protocol and RS485 interface applied in many industrial field. We developed hardware to receive alanlog sensor output and monitoring program to communicate with hardware and carried out experiment with potentiometer for plan sensor, . Through online communication between Master and Slaves we convinced the usage of this systems. Also plant data file that saved in Excel format is convenient in writing various typs of documents.

• Journal of Korea Multimedia Society
• /
• v.20 no.3
• /
• pp.511-519
• /
• 2017

This Paper introduces the design and communication method between PLC (Programmable Logic Controller) and Arduino based on MODBUS Protocol. MODBUS connection can be established in a new or existing system very easily, therefore we used this protocol in our proposed system. In the field of automatic devices, multi-function serial port such as RS232, RS422, RS485, and so on creates a great convenience to the developer. This proposed system used RS485 as a key mediator for data exchanging on a connected network. We also believe that it will reduce the development cost in various automated industry because this system can be reused or can be implemented any such PLC installed machines. RS485 is used as a communication interface between PLC (as a slave) and Arduino (as a master), through which a reliable network is created for safe and fast communication. Furthermore, RS485 allows multiple devices(up to 32) to communicate at half duplex on a single pair of wires and provides a long connectivity area (up to 1200 meters) as compare to other device, which makes it a user-friendly for various devices in the automated industry. Moreover, Arduino can play as a mediator by connecting third party device and setup a communication network with PLC.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.1
• /
• pp.27-35
• /
• 2015

In this paper, we suggested a RS485 based CSMA/CD protocol that is available in low speed multi-node networks such as industry control communication network and home network etc. The suggested protocol was compared to widely used Master-Slave protocol, Modbus. We modeled realistic control network and showed that the average delay and throughput performance were significantly improved in the different transmission rates.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.11
• /
• pp.1109-1117
• /
• 2017

In this work, a new control module and communication system associated with DSP are proposed to overcome the limitations of the contemporary prevailing PLC-based industrial equipment controller, and the performance of the proposed system was experimentally verified. In the light of this issue, a communication conversion scheme from RS-485 to Modbus, the dominant communication protocol used by PLC, was developed and shown to yield enhanced compatibility between devices. The proposed system allows for ~50％ cost reduction as well as downsizing of the industrial controllers. Furthermore, the design includes 24 V general digital I/O pins, which facilitate partial expansion of inputs and outputs. With Modbus communication implemented in DSP with the RS-485 interface, multi-to-multi communication may also be achieved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.285-286
• /
• 2021

With the recent development of Internet of Things (IoT) technology, smartization technology is expanding to the fields of agriculture, livestock, and fisheries, and smartization is in progress. In this smart technology, the most important thing is how to measure the data in the field and transmit it to the management system. Currently, the sensors used in the construction of smart farms and other livestock houses and farms are measuring and monitoring smart farms and other environmental conditions through various sensors such as temperature, humidity, CO gas, CO2, hydrogen, and O2. The communication method between these sensors and the HMI (Human Machine Interface) module that controls and manages the smart farm is still mainly using the RS-485-based modbus-RTU method. In this paper, we intend to design the MCU module for HMI so that various sensor modules can be connected to manage data through the RS-485-based Modbus method so that the sensor data required for smart farm construction can be managed by the HMI module.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1054-1057
• /
• 2015

Real time processing is important in the industrial field. In this paper, we implement for Modbus/RTU(Remote Terminal Unit) protocol using LabVIEW based on serial communication. In other to obtain the experimental data from torque sense and voltage/current meter, Modbus/RTU protocol is implemented by LabVIEW tool. Mechanical loss can be calculated by torque, RPM, voltage, and current. Source code consist of panel and block diagram. We confirmed these source code can be applied in industrial field.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.299-305
• /
• 2015

Modbus is a serial communications protocol, it has since become a practically standard communication protocol, and it is now a commonly available means of connecting industrial electronic devices. Therefore, it can be connected with all devices using Modbus protocol to the measurement and remote control on the ships, buildings, trains, airplanes and etc.. In this paper, we add the Modbus communication protocol to the existing lighting controller sensitivity to enable verification and remote control by external environmental factors, and also introduces a fuzzy inference system was configured by external environmental factors to control LED lighting. External environmental factors of temperature, humidity, illuminance value represented by the LED through a fuzzy control algorithm, the values accepted by the controller through the sensor. Modbus is using the RS485 Serial communication with other devices connected to the temperature, humidity, illumination and LED output status check is possible. In addition, the remote user is changed to enable it is possible to change the RGB values in the desired color change. Produced was confirmed that the LED controller output is based on the temperature, humidity and illumination.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.565-566
• /
• 2009

• Journal of Advanced Navigation Technology
• /
• v.12 no.5
• /
• pp.464-469
• /
• 2008

The RS-232C (Unbalanced serial) and RS-485 (balanced serial) are standard in serial communication. RS-485 uses a differential electrical signal, as opposed to unbalanced signals referenced to ground with the RS-232. Differential transmission, which uses two lines each for transmit and receive signal results in greater noise immunity and longer distances as compared to the RS-232C. The greater noise immunity and distance are big advantages in industrial environments. In general, one protocol on one serial interface is very normal application. In this study, we implemented multi protocols on one serial RS-485 interface and examine the performance and result with hanging multi equipments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.4
• /
• pp.334-340
• /
• 2004

In this paper, a Web-based management system for the building network is described. A multi-protocol converter based on SoC and embedded Linux is designed. The open source licensing, reliability, and broad hardware support are key reasons for use of embedded Linux in embedded industry. The multi-protocol converter integrates control network of RS-485 and LonWorks devices through TCP/IP protocol for a client with Java applet. The system consists of three-tier architecture, such as a client, a server that is performed on a multi-protocol converter, and control devices. The developed system includes the inverter motor control system with modbus protocol for the RS-485 network. The experiment results show that the multi-protocol converter using embedded Linux is a flexible and effective way to builda Web -based monitoring and control system.