필터는 저에너지 X선을 흡수함으로써 평균에너지를 증가시키고, 환자의 피폭선량을 감소시키는 작용을 한다. 본 연구는 Mo과 W 등의 재질이 디지털 방사선영상장치인 CR에서도 사용이 가능한지 SNR, FOM, histogram 등의 영상평가와 선량 측정을 통해 확인하였다. 또한 필터의 재질에 따른 선질측정과 함께 관전압의 변화에 따른 적합한 필터 조합을 찾아보았다. 피부입사선량은 Mo필터가 Cu필터에 비해 42~56%까지 선량 경감효과가 있었고, 투과선량도 Mo필터가 Cu필터보다 1.5배 정도 높게 나타났다. 영상 평가에서 W은 필터로 사용함에 부적절하였으나, Mo은 80 kVp 이상의 관전압에서 영상의 질을 저하시키지 않으면서 선량을 감소시킬 수 있는 필터로 충분히 사용할 수 있음을 확인하였다. 2.0 mmAl+0.1 mmMo은 관전압이 높아질수록 2.0 mmAl + 0.2 mmCu와 histogram width가 거의 같아서, 비교적 높은 관전압인 80, 100, 120 kVp에서는 Mo필터의 사용이 가능하다. 2.0 mmAl + 0.1 mmMo의 SNR은 2.0 mmAl + 0.2 mmCu와 2.0 mmAl+0.1 mmCu의 SNR과도 큰 차이가 나지 않았다. 따라서 디지털 방사선 영상 중 80 kVp 이상을 이용하는 일반촬영에서 Cu를 대신하여 Mo을 필터로 사용하면 Cu에 비해 영상의 질을 저하시키지 않으면서 환자의 피폭선량을 크게 감소시킬 수 있으므로, 실제 임상의 흉부 촬영 및 고관전압 촬영 등에 충분히 적용할 수 있다고 본다.
유방촬영술은 유방암의 조기진단과 기본적인 스크리닝 검사의 진단방법으로서 디지털유방영상시스템의 보급과 유방촬영에 대한 관심이 점점 증가하고 있다. 유방영상의 화질은 타깃물질과 필터의 조합에 의해 결정되며, 이러한 조합은 X선 스펙트럼도 변화되지만 화질과 환자의 피폭선량에도 큰 영향을 주기 때문에 환자의 유선밀도와 두께에 따른 적합한 조합의 선택이 필요하다. 이에 본 연구에서는 디지털유방영상시스템에서 정량적인 영상평가와 몬테카를로 시뮬레이션을 이용한 환자의 피폭선량을 저감시킬 수 있는 타깃과 필터 조합을 제시하고자 한다. 그 결과 MTF, NPS, DQE의 영상평가에서 압박 유방의 두께가 얇은 경우는 Mo/Mo또는 Mo/Rh 조합, 두꺼운 경우에는 Rh/Rh또는 W/Rh조합의 영상이 우수하게 나타났다. 또한 임상에서 얇은 두께의 유방에 잘 사용하지 않는 W/Rh조합이 공간해상력 평가 결과에서 우수한 것으로 나타났다. 그리고 선량평가에서 압박 유방두께가 얇은 경우 Mo/Mo또는 Mo/Rh조합, 압박 유방두께 6cm 이상의 경우 Rh/Rh또는 W/Rh조합에서 피폭선량이 감소하였다. 두 번째 장기선량 평가에서는 검사 유방 외에 반대 유방의 선량이 검사 유방을 기준으로 약 47~73% 정도의 영향을 미치는 것으로 나타났다. 결론적으로 다양한 유방 두께에 따른 최적의 타깃과 필터 조합을 선택하는 것이 환자 피폭선량 감소에 도움이 될 것이다.
인체의 유방은 조직 간의 엑스선 흡수차가 작기 때문에 엑스선관 Target/Filter의 적절한 조합으로 피사체의 대 조도를 높이는 일이 중요하다. 최근 장비들은 다양한 유방두께와 유선조직 밀도에 따라서 Target/Filter의 조합을 변화시켜 환자의 피폭 선량 경감 및 진단에 알맞는 화질을 얻고 있다. 본 실험은 Target/Filter의 조합에 따라 해상력 챠트를 이용하여 MTF 영상의 평가와 유방 팬톰 영상을 평가하여 다음과 같은 결론을 얻었다. 1. 아크릴 두께(2 cm, 3 cm, 4 cm)의 조합(Mo/Mo, Mo/Rh. Mo/Al, Rh/Rh, Rh/Al)에 따라 고유원자번호에 의해 엑스선 에너지에서 큰 차이를 보였다. 2. MTF 곡선에서 선예도를 나타내는 MTF 0.5에서의 Lp/mm 값은 아크릴 2 cm일 때 Mo/Mo은 2.4 Lp/mm, 4 cm일 때 Mo/Rh은 2.63 Lp/mm, 6 cm일 때 Rh/Rh은 2.9 Lp/mm로 높게 나타났다. 3. 분해능을 나타내는 MTF 값은 아크릴 2 cm일 때 Mo/Mo은 6.0 Lp/mm, 4cm일 때 Rh/Al은 4.60 Lp/mm, 6 cm일 때 Rh/Al은 6.03 Lp/mm로 MTF 값이 높게 나타났다. 4. 시각적 식별이 가능한 2.5 Lp/mm에서 MTF 값은 2 cm일 때 Mo/Mo은 0.48 Lp/mm, 4 cm일 때 Mo/Rh은 0.53 Lp/mm, 6 cm일 때 Rh/Rh은 0.59 Lp/mm로 높게 나타났다. 5. 유방 팬톰 영상평가에서는 Mo/Mo일 때 12점, Mo/Rh일 때 11점, Rh/Rh일 때 10.5점, Mo/Al일 때 10점, Rh/Al일 때 9점 순으로 나타났다.
Journal of information and communication convergence engineering
/
제22권2호
/
pp.165-171
/
2024
In this study, we present a novel approach for enhancing chest X-ray image classification (normal, Covid-19, edema, mass nodules, and pneumothorax) by combining contrastive learning and machine learning algorithms. A vast amount of unlabeled data was leveraged to learn representations so that data efficiency is improved as a means of addressing the limited availability of labeled data in X-ray images. Our approach involves training classification algorithms using the extracted features from a linear fine-tuned Momentum Contrast (MoCo) model. The MoCo architecture with a Resnet34, Resnet50, or Resnet101 backbone is trained to learn features from unlabeled data. Instead of only fine-tuning the linear classifier layer on the MoCopretrained model, we propose training nonlinear classifiers as substitutes for softmax in deep networks. The empirical results show that while the linear fine-tuned ImageNet-pretrained models achieved the highest accuracy of only 82.9% and the linear fine-tuned MoCo-pretrained models an increased highest accuracy of 84.8%, our proposed method offered a significant improvement and achieved the highest accuracy of 87.9%.
Purpose: Dental casting #Gr I (Co-25Cr-5Mo-3Sn-1Mn-1Si), #Gr II (Co-25Cr-5Mo-5Cu-1Mn -1Si) and #Gr III (Co-25Cr-5Mo-3Sn-5Cu-1Mn-1Si) master alloys of granule type were manufactured the same as manufacturing processes for dental casting Ni-Cr and Co-Cr-Mo based alloys of ingot type. These alloys were analyzed melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: These alloys were manufactured such as; alloy design, the first master alloy manufatured using vacuum arc casting machine, melting metal setting in crucible, melting in VIM, pouring in the mold of bar type, cutting the gate and runner bar and polishing. These alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer indicated alloys in the crucible were set and operated. Results: The melting temperatures of these alloys measuring infrared thermal image analyzer were decreased in comparison with remanium$^{(R)}$ GM 800+, vera PDI$^{TM}$, Biosil$^{(R)}$ f, WISIL$^{(R)}$ M type V, Ticonium 2000 alloys of ingot type and vera PDS$^{TM}$(Aabadent, USA), Regalloy alloys of shot type. Conclusion: Co-Cr-Mo based alloy in addition to Sn(#Gr I alloy) were decreased the melting temperature with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer.
피로균열 성장거동 관찰을 위한 새로운 실험 방법의 개발이 필요하다. 이러한 요구를 만족시키기 위해서 본 연구에서는 영상처리기법을 피로시험에 도입하였으며, 영상처리시스템을 이용하여 표면피로균열길이를 측정하였다. 먼저 주기적으로 시험하중을 멈추는 동안 균열영상 데이터를 컴퓨터에 저장시켰다. 시험이 끝난 후에는 본 연구진에서 개발한 영상처리 소프트웨어를 사용하여 균열길이를 측정하였으며, 이를 위하여 블록매칭방법을 포함한 다양한 영상처리 기법을 적용하였다. 영상처리시스템으로 측정한 데이터와 현미경을 이용하여 수동으로 측정한 데이터를 비교하여 영상처리시스템의 유효성을 검증하였다. 만약 본 연구에서 제안한 방법을 균열성장거동을 자동적으로 관찰하거나 모니터 하는데 사용한다면 피로시험에 소요되는 시간과 노동력을 현격히 줄일 수 있다.
Purpose: Dental casting Co-Cr-Mo based alloys of five kinds of ingot type and two kinds of shot type were analyzed the melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: When Co-Cr-Mo based alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer and IR thermometer indicated these alloys in the crucible were set and operated. Results: The melting temperatures of alloys measuring infrared thermal image analyzer were deviated ${\pm}10^{\circ}C$ compared to those of manufacturing company. On the other hand, the melting time of alloys were differently appeared with the shape of alloys(ingot and shot type). Conclusion: The melting temperatures of dental Co-Cr-Mo based alloys were measured the degree of $1,360{\sim}1410^{\circ}C$ and the heating time with the alloys of ingot and shot type were deviated ${\pm}10sec$.
디지털유방촬영기에서 자동모드를 설정해서 검사를 할 경우 환자가 받는 평균유선선량(average grandular dose)를 줄일 수 있는 방법을 제시하고자 최적의 노출 파라미터를 찾고 노이즈 감소 알고리즘을 적용하여 화질을 개선하고자 한다. 실험을 위하여 Nuclear Associates Model 18-222 의 팬텀을 사용 하였으며, 입사선량(enterance dose)과 평균 유선선량을 측정하였다. 다음 노이즈(noise) 제거 알고리즘을 적용하였고, 적용 전 후에 대해서 Signal, Noise, SNR, FOM을 측정하고 비교 평가 하였다. 실험결과 첫째, 노이즈 제거 전 Mo/Mo 23kvp에서 SNR이 가장 높았고, 평균유선 선량은 W/Rh 35kvp 에서 가장 낮았다. FOM 결과 W/Rh의 28kVp를 사용하는 것이 가장 좋은 것으로 나타났다. 노이즈 제거 알고리즘 적용 후 SNR은 Mo/Mo 23kvp에서 SNR 가장 높았고, FOM의 결과 W/Rh의 28kVp를 사용 하는것이 가장 좋은 것으로 나타났다. 이때 동일한 평균유선선량을 갖는 조건에서 노이즈 값은 4.36에서 1.74로 감소되었으며, SNR 값은 4.6에서 11.6으로 향상되었다. 제안하는 노이즈 제거 처리를 적용하면 영상에서 중요한 정보를 유지하면서 노이즈를 감소시킬 수 있고, 최적의 노이즈 처리와 최적의 검사조건을 선택함으로써 유방 검사 시 발생하는 방사선 피폭을 줄일 수 있을 것이다.
We report processing technique in the MO image measurement system. Calibration procedure is not only considered to perpendicular field but also in-plane field. Current density and field profiles are obtained by Biot-savart law and inversion method. We show example of $(Gd,Y)_1Ba_2Cu_3O_{7-{\delta}}-BaZrO_3$ film that have tilted nano rod pinning centers about $13^{\circ}$ from the c-axis.
Purpose : Computed radiography (CR) has been used in cephalometric radiography and many studies have been carried out to improve image quality using various digital enhancement and filtering techniques, During CR image acquisition, the frequency rank and type affect to the image quality. The aim of this study was to compare the diagnostic quality of conventional cephalometric radiographs to those of computed radiography. Materials and Methods : The diagnostic quality of conventional cephalometric radiographs (MO) and their digital image counterparts were compared, and at the same time, six modalities (M1-M6) of spatial frequency-processed digital images were compared by evaluating the reproducibility of 23 cephalometric landmark locations. Reproducibility was defined as an observer's deviation (in mm) from the mean between all observers. Results and Conclusion: In comparison with the conventional cephalometric radiograph (MO), Ml showed statistically significant differences in 8 locations, M2 in 9, M3 12, M4 in 7, M5 in 12, and M6 showed significant differences in 14 of 23 landmark locations (p < 0.05). The number of reproducible landmarks that each modality possesses were 7 in M6, 6 in M5, 5 in M3, 4 in M4, 3 in M2, 2 in Ml, and 1 location in MO. The image modality that observers selected as having the best image quality was M5.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.