• Journal of Ocean Engineering and Technology
• /
• v.5 no.1
• /
• pp.88-96
• /
• 1991

Fatigue life and retardtion behavior after through-thickness were examined experimentally by using a CT specimen and surface-cracked specimen. The material used was 3% Ni-Cr-Mo steel. The fatigue crack shape before through-thickness is almost semicircular, and the measured aspect ratio is larger than the value obtained by calculation using the K value proposed by Newman-Raju. It is found that the crack growth behavior on the back side after through-ghickness is unique and can be divided into three stages a, b and c. A retardation parameter has been used successfully to predict the growth of cracks in specimen, and in this time, retardation factor is 4.3. By using the crack propagation rule considering on retardation state and the K value proposed by the authors, the remarkable crack growth behavior and the change in crack shape can be evaluated quantitatively.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.184-186
• /
• 2003

In order to reduce numerical dissipation in a multi-dimensional flow, a new variable interpolation method for Roe's FDS is proposed. By introducing the Mach number weighting function w, the properties at the cell-interface are interpolated and in a non flow-aligned grid system, it can give more accurate solution because of less numerical dissipation. Various test cases including oblique contact discontinuity are simulated and compared with the results of original Roe's FDS.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.589-592
• /
• 2002

A commercial CFD code is applied to analyze the 3-D viscous flow field within vertical multi-stage centrifugal pump including impeller of centrifugal pump with 6 blades and guide vain with 11 blades. The numerical analysis of vertical multi-stage centrifugal pump is performed by changing flow rate from $8\;to\;26\;m^{3}/h$ at the constant 3500rpm. The characteristics such as total pressure coefficient, total head, water horse power, power efficiency are represented according to flow rate changing. In the future, we will need to perform flow calculation of vertical multi-stage centrifugal pump by considering meridional shape of impeller.

• Journal of Digital Contents Society
• /
• v.10 no.4
• /
• pp.633-637
• /
• 2009

In this paper, we present the reuse module library generating algorithm and register-transfer (RT) library generating algorithm considering the power consumption of reuse module for field-programmable gate array (FPGA) technology mapping in order to implement into the circuit for calculating power consumption. To realize the circuit of calculation of power consumption, the FPGA is selected. Considering lookup table (LUT) conditions of selected FPGA, technology mapping process is conducted to minimize the total power consumption. With these information, the circuit is realized using suitable given power consumption among allocated results of modules.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.671-676
• /
• 2006

A measurement system was developed in this study. It conducts on-line testing and evaluation of tilting train express(TTX). The measurement system is installed in each train for the performance measurement during the test run. It is composed of software part, hardware part and can measure various signals such as vehicle velocity, catenary voltage, motor temperature. The software controls the hardware of the measurement system, performs the analysis and calculation of measurement data and acts as interface between users and the system hardware. The hardware is consisted of 7 DAMs(Data Acquisition Modules) and 6 monitoring modules.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.141-147
• /
• 2011

A two-phase numerical model for plate-fin heat exchangers with plain fins and wave fins is studied incorporating the thermodynamic properties and the characteristics of fluid flow. The numerical simulations for the two fins in cryogenic conditions are earned out by employing a homogenous two-phase flow model with the CFD code ANSYS CFX. The heat transfer coefficients and the friction factor for nitrogen saturated vapor condensation process inside two types of plate fin heat exchanger are evaluated including the effects of saturation temperature (pressure), mass flow rate and inlet vapor quantity. The convective heat transfer coefficients and friction factors will be used for design of plate-fin type heat exchangers operating under cryogenic conditions.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.344-349
• /
• 2005

Neutron count rate measurements to assay fissile content of uranium powder have been carried out in a neutron counter. The induced fission neutrons by Cf-252 neutron source are counted as the variation of fissile material in fuel material. The measured counts are compared with equivalent results obtained from calculation. It shows that the measured neutron counts versus quantity of $UO_2$ powder enrichment agreed reasonably well with the calculated values.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.29-34
• /
• 2007

월드와이드웹에서의 정보를 재사용, 공유할 수 있도록 기준을 제시한 XML은 많은 곳에서 사용 중에 있으며, 널리 확산되고 있다. 사용자 정의태그를 이용한 XML의 특징은, 같은 도메인의 문서라도 사랑의 인식이 아닌 컴퓨터와 같은 기계적으로는 다르게 인식될 수 있다는 문제점을 드러내기도 한다. 본 논문에서는 이러한 문제점을 해결하고자 시소러스와 온톨로지 등을 이용해 XML 문서간 유사도를 측정하는 방법을 제시하며 이를 바탕으로 제작한 프로그램인 #XML Similarity Calculation# 를 이용하여 제시한 방법이 타당하다는 것을 증명하게 된다. 또한 주어진 예시자료를 가지고 이 프로그램의 성능평가를 통해 정확성과 효율성을 평가하고 앞으로의 연구방향을 제시한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.111-112
• /
• 2016

Waterproofing methods for applying to roof-top in the building are various, but it is not enough to development, which are simplified and low-cost method for old building. Especially, these buildings have not only a low insulation, but a disadvantage for energy. A floating floor method is necessary for this. This study performs an experimentt about bonding capacity of complex panel for waterproofing and heat insulation. The bond strength experiment is based on KS F 4716, and it is considered by bond mix proportion about panel and slab.

• Journal of electromagnetic engineering and science
• /
• v.7 no.2
• /
• pp.59-63
• /
• 2007

This paper suggests a novel method to efficiently calculate the spatial-domain Green's functions of 2D electromagnetic problems Briefly speaking, this method combines spectral and spatial domain calculation schemes and prevents the Green's functions from poor convergence due to the singularities that complicate the process of the Method of Moment(MoM) applications For the validation of this proposed method, fields will be evaluated along the spatial distance including zero distance for 2D free-space and periodic homogeneous geometry The numerical results show the validity of the prosed method and correspondng physics.