• Journal of Environmental Health Sciences
• /
• v.22 no.4
• /
• pp.1-9
• /
• 1996

Experiments have been made to test the practical feasibility of using calcined manganese ore to desulfurize hot reducing gas. In this study, the effects of particle size of sorbents, temperature of sulfidation, flow rate and sorbent characteristics on the $H_2S$ removal efficiency of calcined manganese ore were investigated. Experimental results showed that the removal efficiency of $H_2S$ was optimum when the temperature was about 800$\circ$C and that the smaller particle size the higher the $H_2S$ removal efficiency. When the temperature was above 800$\circ$C, the reactivity of sorbent has lowered because agglomeration of sorbent increased intraparticle transport resistance, and this phenomenon was confirmed by SEM photographs. As the temperature increases, capacity for the $H_2S$ removal was increased but the equilibrium concentration of $H_2S$ was not affective.

• Journal of Welding and Joining
• /
• v.22 no.3
• /
• pp.56-61
• /
• 2004

Friction stir weldability of AZ31B Mg alloy was studied using microstructural observation and mechanical tests. Defect free joints was obtained under the condition of 2000rpm-100mm/min. In TMAZ, a lot of twin deformation were observed due to the mechanical effect of the FSW tool and thus relatively high hardness was obtained. In SZ, the twin deformation was disappeared by recovery and the hardness decreased because the. grain structure was coarsened by dynamic recrystallization and grain growth. The Al-Mn precipitates were observed throughout the joint regions. On the other hand, $$\beta$-Mg_{17}Al_{12}$ intermetallic compounds were not observed in either of the zone. The joint efficiency was about 80% and the impact value of the joint was almost equal to that of base metal.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.3
• /
• pp.150-155
• /
• 2019

The carbon electrode was modified through manganese-catalyzed hydrogenation method for high energy density vanadium redox flow battery (VRFB). During the catalytic hydrogenation, the manganese oxide deposited at the surface of the carbon electrode stimulated the conversion reaction from carbon to methane gas. This reaction causes the penetration of the manganese and excavates a number of cavities at electrode surface, which increases the electrochemical activity by inducing additional electrochemically active site. The formation of the porous surface was confirmed by the scanning electron microscopy (SEM) images. Finally, the electrochemical performance test of the electrode with the porous surface showed lower polarization and high reversibility in the cathodic reaction compared to the conventional electrode.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• Molecular & Cellular Toxicology
• /
• v.2 no.3
• /
• pp.176-184
• /
• 2006

The controversy on genotoxicity of molinate, an herbicide, has been reported in bacterial system, and in vitro and in vivo mammalian systems. To clarify the genotoxicity of molinate, we performed bacterial gene mutation test, in vitro chromosome aberration and mouse lymphoma $tk^{+/-}$ gene assay, and in vivo micronucleus assay using bone marrow cells and peripheral reticulocytes of mice. In bacterial gene mutation assay, no mutagenicity of molinate ($12-185{\mu}g/plate$) was observed in Salmonella typhimurium TA 98, 100, 1535 and 1537 both in the absence and in the presence of S-9 metabolic activation system. The clastogenicity of molinate was observed in the presence ($102.1-408.2\;{\mu}g/mL$) of metabolic activation system in mammalian cell system using Chinese hamster lung fibroblast. However, no clastogenicity was observed in the absence ($13.6-54.3\;{\mu}g/mL$) of metabolic activation system. It is suggested that the genotoxicity of molinate was derived some metabolites by metabolic activation. Molinate was also subjected to mouse lymphoma L5178Y $tk^{+/-}$ cells using microtiter cloning technique. In the absence of S-9 mixture, mutation frequencies (MFs) were revealed $1.4-1.9{\times}10^{-4}$ with no statistical significance. However, MFs in the presence of metabolic activation system revealed $3.2-3.4{\times}10^{-4}$ with statistical significance (p<0.05). In vivo micronucleus (MN) assay using mouse bone marrow cells, molinate revealed genotoxic potential in the dose ranges of 100-398 mg/kg of molinate when administered orally. Molinate also subjected to acridine orange MN assay with mouse peripheral reticulocytes. The frequency of micronucleated reticulocytes (MNRETs) induced 48 hr after i.p. injection at a single dose of 91, 182 and 363 mg/kg of molinate was dose-dependently increased as $10.2{\pm}4.7,\;14.6{\pm}3.9\;and\;28.6{\pm}6.3\;(mean{\pm}SD\;of\;MNRETs/2,000\;reticulocytes)$ with statistical significance (p<0.05), respectively. Consequently, genotoxic potential of molinate was observed in in vitro mammalian mutagenicity systems only in the presence of metabolic activation system and in vivo MN assay using both bone marrow cells and peripheral reticulocytes in the dose ranges used in this experiment. These results suggest that metabolic activation plays a critical role to express the genotoxicity of molinate in in vitro and in vivo mammalian system.

• The Journal of Engineering Geology
• /
• v.25 no.3
• /
• pp.339-347
• /
• 2015

Riverbank filtration has been suggested as a cost-effective method for improving water quality. However, high concentrations of Fe²⁺ and Mn²⁺ cause problems for the use of water and the maintenance of facilities. We evaluated the effectiveness and efficiency of an Fe²⁺ and Mn²⁺ removal technique based on the in situ injection of highly oxygenated water at a site on the Anseong River, between Anseong City and Pyeongtaek City, Gyeonggi Province. The removal process consists of three steps: injection, resting, and extraction. Results show that the removal efficiency increases with repeated application of the process. The amount of Fe-reduced drinking water satisfying water regulations (limit, 0.3 mg/L Fe) obtained using oxygenated water injection was five times higher than the amount of injected oxygenated water. Levels of Mn²⁺ were also reduced following the injection of oxygenated water.

• The Journal of Korean Medicine
• /
• v.23 no.1
• /
• pp.67-82
• /
• 2002

Objectives: In recent years, extensive focus has been laid on adulteration of herbal medicine with heavy metals. This may be mainly due to soil contamination by environmental pollution. The objective of this study is to identify the contents of various heavy metals in the blood from Ohjeok-san (Wuji-san) Decoction (OD) treated-rats. Methods: For this study, 13 kinds of metals including essential and heavy metals, i.e. A1, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se and Zn were analyzed by a slight modification of EP A methods and the following results are obtained. Results: 1. There was no significant difference between the OD-treated groups and control group in liver, kidney, bone, brain and weight, especially no significant difference at the 5th and 10th days in weight and the amount of food intake. 2. The amount of each metal analyzed in the blood were as follows; A1: 2.3~3.07 mg/l, As: 2.90~3.66 mg/l, Cd: 0~0.001 mg/l, Co: 0~0.01 mg/l, Cr: 0.40~043 mg/l, Cu: 0.93~1.88 mg/l, Fe: 414.35~464.46 mg/l, Hg: 0.01 mg/l, Mn: 0.10~0.17 mg/l, Ni: 0.01 mg/l, Pb: 0.03~012 mg/l, Se: 0.73 mg/l, Zn: 3.41~4.13 mg/l by groups, respectively. In control and experimental group, Experimental I and other experimental II, III, IV, and V groups, there were no significant differences. 3. The amount of non-toxic metals (A1, Co, Cu, Fe, Mn, Se, Zn) were $64.1{\pm}7.71{\;}mg/l$ in the control group and 60.70~67.58 mg/l in the experimental groups I, II, III, IV and V. The amount of Toxic metals (As, Cd, Cr, Ag, Pb) were $0.68{\pm}0.21{\;}mg/l$ in the control group and 0.57 ~ 0.66mg/l in the experimental groups. The total amount of metals were 32.35 mg/l in the control group and 30.48~34.12 mg/l in the test groups I, II, III, IV and V, respectively. Conclusions: There was no significant difference of metal concentration in the blood from the OD-treated-rats compared to those of the control group even if higher dosage (1~8 times the dosage for a person) of OD was administered. This may be mainly due to a decoction treatment which contains only supernatants filtered from the herb-mass after boiling. This indicates the legal limitation for metal concentration in herbal medicine must be applied according to different treatment methods of herbal medicine.

• Child Health Nursing Research
• /
• v.5 no.2
• /
• pp.151-166
• /
• 1999

The purposes of this study were to measure the degree of perceived uncertainty, social support & powerlessness, to examine the relationship between the perceived uncertainty, social support & powerlessness and then to find the predictors of powerlessness in mother's of handicapped children. The subjects of this study consist of 102 mothers of handicapped children, registered at rehabilitation & handicapped children school. Data was collected from September 1998 to March 1999. The tools used in this study were Mishel's the Parents' Perception of Uncertainty Scale (28 item, 4 likert scale), Miller's Powerlessness measurement Scale(28 itewt 4 likert scale) & Cohen's Interpersonal Support Evaluation List (40 items, 4 likert scale). Data was analyzed by t-test, ANOVA, Duncan comparison, Pearson Correlation coefficient & Stepwise multiple regression Results of this study are summarized as follows : 1. Mothers perceived their uncertainty to be slightly high(Mn 2.50). The degree of perceived uncertainty by the four components were followed as : lack of clarity(2.69), unpredictability(2.56), ambiguity(2.56) & lack of information(2.46). The degree of perceived uncertainty of the mothers of handicapped children revealed to be influenced significantly by age of children, admission experience, disability types of children. 2. The degree of mothers' powerlessness was measured to be slightly high(Mn 2.14). The degree of perceived powerlessness of the mothers with handicapped children revealed to be influenced significantly by age of children, duration of illness admission experience,8E marital status of the mothers. 3. Mothers perceived their social support to be slightly high(Mn 2.71). The degree of perceived social support revealed to be influenced significantly by sex of children, married state of mothers. 4. Mothers' uncertainty was related positively to the mothers' powerlessness(r=.33, p=.0008). And also mothers' powerlessness was related inversely to social support(r=-.50, p=.0001). But, mothers' uncertainty was not related to social support significantly. 5. To analyze the variables which affect powerlessness, stepwise regression was implemented. As a result, about 61% of the powerlessness were explained by social support, marital status of the mothers and perceived uncertainty. Based upon these results, it is recommended that the nurses, who are caring handicapped children and their families, provide various support programs for them to overcome their difficulties. Also programs which decrease the uncertainty & powerlessness used social support multidimensionally & individually are recommended to be developed.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.56-62
• /
• 2001

The investigation was carried out to analyze the generation and the composition of landfill gas generated from inserted pipe wells into the underground by boring operation and also study the undecomposed waste characteristics by open-cut test at S. waste landfill site in Pusan city. Pilot test was conducted for stabilization. The experimental results from this study were summerized as follows. ; Since COD matter was easuer decomposed than COD matter for continuously biological stabilization in underground, it seemed that BOD and CO $D_{Mn}$ were in the range of 854~4,813mg/$\ell$ and 1,156~6,977mg/$\ell$ and their ratio were generally as high as 0.55~0.74. As C $H_4$ compositions of generated gas were measured in the range of 37.36~60.1%, we could know that C $H_4$ gas was actively generated. Organic matters by open-cut test averaged 13.4~16.6% at each landfill layer, and considering rate of combustible compositions(36.2~66.5%) for landfilling wastes, they have been actively decomposed. The measured and theoretical values of generated gas in waste landfill site were almost similar to C $H_4$ 50.0% and 53.4%, $CO_2$ 39.63% and 45.24%, and after 0.5$^{\circ}C$ with heavy depth and long landfill period. From the results of pilot test for stabilization, after 180 days organic matters were actively decomposed beyond 2.2 times in facultative aerobic lystimeter(B) to exsiting anaerobic lysimeter(A). Therefore, it seemed that landfill site was of benefical to the conversion of facultative aerobic for stabilization.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.512-521
• /
• 2017

This paper reports development process of a university-based sounding rocket using simplified hybrid rocket propulsion system for low-altitude flight application. A hybrid propulsion system was tried to be designed with as few components as possible for more economical, simpler and safer propulsion system, which is essential for the small scale sounding rocket operation as a CanSat carrier. Using blow-down feeding system and catalytic ignition as combustion starter, 250 N class hybrid rocket system was composed of three components: a composite tank, valves, and a thruster. With a composite tank filled with both hydrogen peroxide($H_2O_2$) as an oxidizer and nitrogen gas($N_2$) as a pressurant, the feeding pressure was operated in blowdown mode during thruster operation. The $MnO_2/Al_2O_3$ catalyst was fabricated for propellant decomposition, and ground test of propulsion system showed the almost theoretical temperature of decomposed $H_2O_2$ at the catalyst reactor, indicating sufficient catalyst efficiency for propellant decomposition. Auto-ignition of the high density polyethylene(HDPE) fuel grain successfully occurred by the decomposed $H_2O_2$ product without additional installation of any ignition devices. Performance test result was well matched with numerical internal ballistics conducted prior to the experimental propulsion system ground test. A sounding rocket using the developed hybrid rocket was designed, fabricated, flight simulated and launch tested. Six degree-of-freedom trajectory estimation code was developed and the comparison result between expected and experimental trajectory validated the accuracy of the developed trajectory estimation code. The fabricated sounding rocket was successfully launched showing the effectiveness of the simplified hybrid rocket propulsion system.