• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.129-133
• /
• 1999

Excessive soil water at vegetative growth stages during the rainy season induces yield losses in soybeans. Our objectives were to obtain basic information about the cultivar differences and to understand the stress-tolerance process for due to excessive soil water. Previous experiments revealed soybean genotypic differences in tolerance to excessive soil water. A field experiment was conducted at the Research Farm of Korea University near Seoul on 21 May 1998. Soybean[Glycine max (L.) Merrill] cultivars, 'Hannamkong' (sensitive) and 'Taekwan-gkong'(tolerant) were planted in vinyl-lined plots(1.2 x 4.2 x 0.3 m deep) and control plots. Drip irrigation began at VI growth stage to submerge the soil surface. Three weeks of excessive soil water treatment reduced all growth parameters measured to soybean plants. Excessive soil water stress resulted in decreases of N, P, K, Ca, Mg and Cu, and increases of Fe and Mn contents in soybean leaves. The stress index of tolerant cultivars under excessive soil water showed no large difference in soybean growth characteristics measured at three growth stages. However, K, Ca, Mg, Fe and Mn contents in soybean leaves appeared to differ between sensitive and tolerant cultivars. From the above results, stress and tolerance indices are proposed for a method to test cultivar differences in plant responses within a species under adverse growth environments.

• Journal of Korea Foundry Society
• /
• v.35 no.1
• /
• pp.1-7
• /
• 2015

In this study, we investigated the effect of carbon on mechanical properties with different austempering conditions of high carbon(0.7~1.3wt.%C)-2.0wt.%Si steels. The specimens were austenitized at 850, 925 and $1020^{\circ}C$, and austempered at 260, 320 and $380^{\circ}C$ for the various period of time from 3 min to 300 min. After heat treatment, the evolution of stage I and stage II was identified with optical microscope, XRD and hardness test. When the austempering temperature was $260^{\circ}C$, the microstructure consisted of the lower ausferrite while the upper ausferrite micro-structure was formed at $380^{\circ}C$. As the austempering temperature increases from 260 to $380^{\circ}C$, the tensile strength decreases and elongation increases. In addition, when carbon content increases, tensile strength and elongation decrease.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1168-1174
• /
• 2011

The IEFT has recently considered to provide flow mobility for multi-interface MN in the PMIPv6. In this paper, we proposed an extended BCE of the LMA and a novel mechanism for flow mobility of PMIPv6. With our proposal BCE and mechanism, the LMA can route packets by the flow label and hence packet loss during handover can be eliminated. Also, to validate our flow mobility scheme, we designed and implemented the PMIPv6 packet data unit and database of both LMA and MAG, and configured a testbed for flow mobility in PMIPv6. And the support of flow mobility was configured with the network connectivity test in our testbed. According to the Wireshark results, we can see that our proposed scheme works wells for flow mobility in PMIPv6.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.6
• /
• pp.350-356
• /
• 2019

In this study, the effect of mechanical polishing of carbon steel on the tribological properties of manganese phosphate coating on carbon steel has investigated. The microstructure, surface morphology and chemical composition were analyzed by SEM, EDS, and XRD. The surface roughness test was carried out in order to calculate Rvk value by 3D laser microscopy. Also, the tribology property of manganese phosphate coating was tested by ball-on disk. In the results of EDS analysis, coating layer consists of elements such in Mn, P, Fe, and O. XRD showed that (Mn,Fe)₅H₂(PO₄)₄·4H₂O in manganese phosphate coating layer was formed by the chemical reaction between manganese phosphate and elements in carbon steel. As the mechanical polishing degree increased, the friction coefficient was reduced. The rougher the mechanical polishing degree, the better corrosion resistance was obtained.

• Journal of Welding and Joining
• /
• v.7 no.2
• /
• pp.49-59
• /
• 1989

The effect of non-metallic inclusions on the HAZ hydrogen induced cracking was investigated. Quench and temper high tensile strength steels containing various sulphur contents were employed. The sulphur contents range between 0.007% and 0.040%. Non-metallic inclusions were mainly MnS type sylphide and Mn-Al-Si type. The sensitivity of HAZ delayed cracking was evaluated by implant testing. Diffusible hydrogen content was varied by controlling the moisture absorbing condition of manual arc welding electrodes. The one was asreceived condition, the other was dipping the electrodes in the water for ten minutes. The main results obtained were as follows; 1) The results of implant test showed that critical stress increased with increasing S content up to 0.013%. But steel containing 0.040%S showed lower critical stress than that of 0.013% S. These result suggest that there will be optimum S content to prevent HAZ delayed cracking of high strength steels. 2) Under the lower D.H.C. level, critical stress was increased with rolling reduction, but higher D.H.C. level, effect of rolling reduction was not recognized.

• Korean Journal of Metals and Materials
• /
• v.49 no.6
• /
• pp.440-447
• /
• 2011

To improving the mechanical properties of Mg alloys at high temperature, we investigated the mechanical properties at high temperature and the change of microstructure of Mg-6 wt%Zn-0.4 wt%Mn and Mg-6 wt%Zn-0.4 wt%Mn-1 wt%Ag alloys on age treatment that have a stable MgZn phase at high temperature and $AgMg_4$ improving yield stress. In order to predict thermodynamic data of Mg alloys, a phase diagram and precipitation phase were calculated using a thermodynamic program, and it was confirmed that the MgZn and $AgMg_4$ phase existed as main precipitation in this alloys. The experimental data examined using DSC and XRD were comparable with the calculated data for reliability. In order to analysis the microstructure and precipitate phase during aging treatment, it was measured by SEM/EDS and TEM. Lastly, mechanical properties of the MgZn and $AgMg_4$ phase were measured by a tensile test at high temperature.

• Korean Journal of Materials Research
• /
• v.33 no.11
• /
• pp.482-490
• /
• 2023

The purpose of this study was to analyze microstructural changes and evaluate the mechanical properties of TWIP steel subjected to variations in heat treatment, in order to identify optimal process conditions for enhancing the performance of TWIP steel. For this purpose, a homogenization heat treatment was conducted at 1,200 ℃ for 2 h, followed by hot rolling at temperature exceeding 1,100 ℃ and cold rolling. Annealing heat treatment is achieved using a muffle furnace in the range of 600 ℃ to 1,000 ℃. The microstructure characterization was performed with an optical microscope and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness, tensile test, and ECO index (UTS × Elongation). The specimens annealed at 900 ℃ and 1,000 ℃ experienced a significant decrease in hardness and strength due to decarburization. Consequently, the decarburization phenomenon is closely related to the heat treatment process and mechanical properties of TWIP steel, and the effect of the microstructure change during annealing heat treatment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.790-795
• /
• 1995

Flocculant-producing microorganisms were isolated from soil samples using kaoline as the flocculating test material. One strain that had high flocculating activity among them was selected and identified as Arcuadendron sp. TS-49. The favorable medium for production of the flocculant was 3% glucose, 0.2% yeast extract, 0.1% $NH_4Cl$, 0.01% $MgSO_4$, and 0.05% $MnSO_4$ in 150ml of T.W. with initial pH 7.0.The optimum culture temperature and pH were $30^{\circ}C$ and pH 7.0, respectively. The flocculant activity was observed most highly after 4 to 5 days of cultivation at the optimum condition and decreased significantly with the lapse of cultivation time. The flocculant was produced constituently and seemed to be degraded for ressimilation during cultivation. The productivity achieved by this system was about ten-fold higher than that of scrrening mediuim. This bioflocculant flocculated all tested solids, including various microorganisms and organic/inorganic compounds. Several qualitative analyses of the bioflocculant showed that it was a kind of glycoprotein containing sugars and protein.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.3
• /
• pp.13-26
• /
• 2007

Changes in the characteristics of dissolved organic matter was studied at selected stations in the Nakdong river basin using physical and chemical methods. Characteristics of dissolved organic matters were analysed and assessed. Production of disinfection byproducts were also investigated. 1. Result of relatedness study among each items of analyses showed that relatedness on BOD values were highest with cattle excrement treatment facilities where there is no synthetic organic materials and relatedness on $COD_{Mn}$ were highest at the mainstream Nakdong river. In case of $COD_{Cr}$ (which has more oxidative power than $COD_{Mn}$), the values were higher in the sidestreams indicating the higher content of recalcitrant compounds. The relatedness values for the $UV_{254}$ also showed higher values in the sidestreams and treatment facilities than mainstream indicating the presence of organic aromatic compounds. 2. Ratio of DOC on total organic carbon were higher in the mainstream which is attributable to the influent particulate organic materials produced by agricultural activities. The values were 10-15% higher in the mainstream compared with sidestreams. 3. Result of biodegradability test indicate that concentrations of recalcitrant DOC were higher in the sidestreams than in the mainstream. The values of recalcitrant DOC were higher with the forest stream indicating the effect of soil oriented humic substances. 4. Result of THM production test carried out at 10 stations in the Nakdong river show that $CHCl_3$ was detected with the highest value and the value was highest at Waekwan station.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2226-2230
• /
• 2007

As a cathode material of lithium rechargeable batteries, charged Li[Co0.1Ni0.15Li0.2Mn0.55]O2 electrodes, which were aged thermally at 25 oC and 90 oC respectively, were characterized by means of charge/discharger, impedance spectroscopy, and X-ray diffraction. The discharge capacity diminution of the electrodes aged at 25 oC and 90 oC for 1 week was 4% and 23%, respectively. The cell aged at 25 oC was recovered on cycling. However, the capacity loss after ageing at 90 oC was not recovered in a subsequent cycling test, which demonstrates that the reaction occurring during ageing at 90 oC is irreversible. A significant impedance increase of aged electrode at 90 oC is associated with irreversible capacity loss. The structural changes including phase transformation were not detected by XRD analysis, because it could be due to out of detection limit. After ageing, impedance was slightly decreased during subsequent cycling test. It could be explained the cyclic performance of aged sample is stable. The thermal stability was not deteriorated by ageing even at the high temperature of 90 oC.