Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Mechanical Polishing Pretreatment on Tribological Properties of Manganese Phosphate Coating of Carbon Steel

기계적 연마 전처리가 인산망간 피막의 윤활 특성에 미치는 영향

  • Kim, Ho-Young (Metal & Machinery Center, Korea Conformity Laboratories (KCL)) ;
  • Noh, Young-Tai (Metal & Machinery Center, Korea Conformity Laboratories (KCL)) ;
  • Jeon, Jun-Hyuck (Metal & Machinery Center, Korea Conformity Laboratories (KCL)) ;
  • Kang, Ho-Sang (SamHwa P&T Co., LTD)
  • 김호영 (한국건설생활환경시험연구원) ;
  • 노영태 (한국건설생활환경시험연구원) ;
  • 전준혁 (한국건설생활환경시험연구원) ;
  • 강호상 (삼화P&T)
  • Received : 2019.12.13
  • Accepted : 2019.12.27
  • Published : 2019.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the effect of mechanical polishing of carbon steel on the tribological properties of manganese phosphate coating on carbon steel has investigated. The microstructure, surface morphology and chemical composition were analyzed by SEM, EDS, and XRD. The surface roughness test was carried out in order to calculate Rvk value by 3D laser microscopy. Also, the tribology property of manganese phosphate coating was tested by ball-on disk. In the results of EDS analysis, coating layer consists of elements such in Mn, P, Fe, and O. XRD showed that (Mn,Fe)5H2(PO4)4·4H2O in manganese phosphate coating layer was formed by the chemical reaction between manganese phosphate and elements in carbon steel. As the mechanical polishing degree increased, the friction coefficient was reduced. The rougher the mechanical polishing degree, the better corrosion resistance was obtained.

Keywords

Acknowledgement

Supported by : 산업통상자원부

이 논문은 산업통상자원부 ATC 연구개발사업(10076722)의 지원을 받아 수행된 연구임.

References

  1. M. Shoeib, M. Farouk and F. Hanna, Met. Finish, 95(1997)62.
  2. D. Weng, R.Z. Wang and G. Q. Zhang, Met. Finish, 96(1998)54.
  3. D. B. Freeman, Phosphating and Metal Pretreatment, Butler&Tanner Ltd., London, Great Britain, 1986.
  4. M. Matsunage, Y. Tsuya, Handbook of Solid Lubrication, Japan, 1978.
  5. J. L. Grossean-Ponssard, P. Moine, Thin Solid Films, 224(1993)52. https://doi.org/10.1016/0040-6090(93)90457-Z
  6. H. Shin, J. J. Doerr, Surf. Coat. Technol, 40(1989)683.
  7. Khaleghi, M., Gabe, D. R. and Richardsons, M.O.W., Wear, 55(1979) 277. https://doi.org/10.1016/0043-1648(79)90159-5
  8. P. L. Hurricks, Wear, 22(1972)291. https://doi.org/10.1016/0043-1648(72)90391-2
  9. P. Hivart, B. Hauw, J. Crampson, J. P. Bricout, Wear, 219(1998)195. https://doi.org/10.1016/S0043-1648(98)00211-7
  10. Zhang, S., Zhang, X. and Zhang, M., J. Rare Earths, 26(2008)110. https://doi.org/10.1016/S1002-0721(08)60048-4
  11. E. P. Banczek, P. R. P. Rodrigues, I. Costa, Surf. Coat. Technol, 202(2008)2008. https://doi.org/10.1016/j.surfcoat.2007.08.039
  12. S. M. A. Shibli, F. Chacko, Appl. Surf. Sci., 257(2011)3111. https://doi.org/10.1016/j.apsusc.2010.10.125
  13. Zhang, S., Chen, H., Zhang, X. and Zhang, M., Surf. Coat. Technol, 202(2008)1674. https://doi.org/10.1016/j.surfcoat.2007.07.037
  14. G. N. Bhar, N. C. Debnath, S. Roy, Surf. Coat. Technol, 35(1998)171. https://doi.org/10.1016/0257-8972(88)90066-7
  15. Y.T. Noh, H.Y. Kim, Y.M. Byoun, S.K. Seo, S.K. Hyun, C.H. Lee. J.N.N., 18(2018)1.
  16. Y. totik, Surf. Coat. Technol, 200(2006)2711. https://doi.org/10.1016/j.surfcoat.2004.10.004
  17. Wieslaw Grabon, Pawel Pawlus, Metrol. Meas. Syst., 23(2016)593. https://doi.org/10.1515/mms-2016-0046