불포화 비닐 유도체의 다양한 반응성은 자유 라디칼의 사슬 중합반응을 거쳐 유도되어질 수 있으며, 열역학적으로 실행 가능한 고분자 중합을 수행할 수 있는 능력은 주어진 반응조건 항서 반응을 진행시킬 수 있는 적당한 속도에 의존한다. 따라서 반응이 일어날 수 있는 속도조건을 만들기 위해 중합 개시제와 촉진제가 주로 사용되고 있다. 빛의 흡수도는 Methyl Methacrylate(MMA)를 포함한 단지 몇 종류의 불포화 비닐 단량체들만이 가장 편리한 250nm~500nm 파장범위의 빛을 흡수할 수 있다고 알려져 있다. 또한 광학적, 전기적으로 독특한 성질을 가진 polysilanes은 세라믹의 전구물질, UV 광전저항, 광전도체 등으로 널리 사용되어 왔으며, hydrosilation 반응은 실리콘을 포함한 여러 가지 흥미로운 고분자를 만드는데 사용되고 있다 본 연구는 콘텍트렌즈 재료로 사용되는 고분자를 광 화학적 개시제의 작용을 통하여 공중합체와 단일 중합체로 합성하여 그 수율을 분석하였다. 그 결과 이러한 개시제들은 비닐 유도체들의 중하반응에서 경쟁적으로 또는 동시에 사슬 개시와 사슬 전이제로서 작용하고 있음을 보여 주었다.
유기 메모리 절연막 제작을 위해 일반적으로 사용되어지는 습식법이 아닌 건식법 중 플라즈마 중합법을 이용하였다. 유기 절연 박막으로 사용된 단량체는 Styrene과 MMA을 사용하고, 터널링 박막은 MMA를 사용하며, 메모리 박막은 열기상증착법을 이용한 Au 박막을 사용하였다. 최적화된 소자의 구조는 Au의 메모리층의 두께를 7 nm, Styrene 게이트 절연막의 두께를 400 nm, MMA 터널링 박막의 두께를 30 nm로 증착하여 제작된 부동 게이트형 유기 메모리 소자는 40/-40 V의 double sweep시 27 V의 히스테리시스 전압을 얻을 수 있었다. 이 특성을 기준하여 유기 메모리의 전하 포집 특성을 얻을 수 있었다. 유기 재료 중 MMA 대비 Styrene의 전하 포집 특성이 좋은 것으로 보아 향후 부동 게이트인 Au 박막을 유기 재료인 Styrene으로 대체하여 플렉시블 소자의 가능성을 기대한다.
PEGMA macromer를 Na-MMT에 삽입한 후 MMA 및 MA 단량체와의 공중합을 행하여 PEGMA/(Na-MMT)-co-MMA/MA 나노복합재료를 합성하고 이의 특성결정을 행하였다. 제조된 나노복합재료를 XRD로 관찰한 결과, Na-MMT에 PEGMA를 삽입하였을 경우 Na-MMT 양이 증가함에 따라 Na-MMT의 실리케이트 층간거리는 증가하였다. DSC 측정으로부터 Na-MMT 첨가량이 늘어날수록 Tg는 높아지는 경향을 보였다. TGA 측정을 통하여 PEGMA/(Na-MMT)-co-MMA/MA 나노복합재료는 순수한 PEGMA-co-MMA/MA보다 열안정성이 다소 향상됨을 확인하였다.
Cross-linked polystyrene (PS) particles with carboxyl and/or poly(ethylene glycol) units on surface were formed by an emulsifier-free emulsion polymerization using styrene, methacrylic acid (MA), and poly(ethylene glycol) dimethacrylate (PEG-diMMA) at pH 7, and followed by freeze-drying to give the corresponding powders. Monodisperse polymer particles could be obtained at a concentration of PEG-diMMA 1 mol% relative to styrene. Zeta potential of polymer surface was measured to be 91 mV at a polymer of PEG-diMMA 1 mol% and was dropped as the content of MA increased.
This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. VTMS (vinyltrimethoxysilane), TAVS [Triacetoxy(vinyl)silane] and cobalt oxide nanoparticles are used as additives for the basic combination of SilM (silicone monomer), MMA (methyl methacrylate) and MA (methyl acrylate). Also, the materials are copolymerized with EGDMA (ethylene glycol dimethacrylate) as cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially for TAVS, the addition of cobalt oxide nanoparticles increases the oxygen permeability. These materials are considered to create synergy, so they can be used in functional hydrogel ophthalmic lenses.
중심 금속을 안정화시킬 수 있는 ferrocene-based diimine 리간드를 가지고 낮은 산소 친화성을 가진 후전이금속인 Pd 촉매를 합성하여, 극성 단량체인 메틸메타크릴레이트 (MMA)의 중합에 사용하였다. 중합계 내의 impurity scavenger로 triisobutylaluminium (TIBA)를 사용하였을 때에, 중합온도와 [TIBA]/[Pd] 몰비가 생성 중합체(PMMA)의 수율 및 유리전이온도 ($T_g$)에 미치는 영향을 조사하였다. PMMA의 수율은 40~$50^{\circ}C$의 중합온도 및 2000~3000의 [TIBA]/[Pd] 몰비에서 가장 높았다. PMMA의 $T_g$는 중합온도에는 크게 영향을 받지 않으나, [TIBA]/[Pd] 몰비에 의존한다는 것을 관찰할 수 있었다. PMMA의 $T_g$의 변화를 PMMA의 미세구조와 연관시켜 조사한 결과, PMMA의 $T_g$ 이소탁틱도와 직선적 관계를 가짐을 알았다.
다중벽 탄소나노튜브 및 전도성 고분자인 PEDOT으로 이루어진 하이브리드 나노재료를 제조하였다. 다중벽 탄소나노튜브 표면에 처리반응을 수행함으로써 -Br 특성기를 갖는 다중벽 탄소나노튜브를 제조하였으며, 이를 중합반응의 개시제로 사용하였다. 이와 함께 MMA를 사용하여 촉매와 리간드 존재 하에서 원자이동 라디칼중합 공정을 수행함으로써 다중벽 탄소나노튜브 표면에 PMMA가 공유결합된 나노복합체를 제조하였다. 미니에멀젼 중합공정을 통하여 제조된 PS 수용성 에멀젼에 EDOT과 산화가를 투입하여 산화중합을 수행함으로써 core-shell 구조를 갖는 PEDOT/PS 나노입자를 제조하였다. 실란화합물로 표면 처리한 silica 입자를 PEDOT:poly(styrene sulfonate) (PSS) 수용성 분산액에 투입한 후 표면화학 반응과정을 수행함으로써 silica 외벽에 PEDOT:PSS가 코팅된 나노입자를 제조하였다. 하이브리드 나노재료들은 TEM, FE-SEM, TGA, EDX, UV 그리고 FT-IR 등을 사용하여 분석되었다.
The present study investigated the effectiveness of pretreatment on dentin bonding. The adhesive resin was 5% 4-methacryloyloxyethyl trimellitate anhydride (4-META) in methyl methacrylate (MMA) combined with poly-MMA powder. Polymerization of this resin was initiated by tri-n-butyl borage (TBB). Ground bovine dentin samples were etched with either an aqueous solution of 10% citric (10-0 solution) (Group I) or aqueous solution of 10% citric acid and 3% ferric chloride(10-3 solution) (Group ll ). After etching, the primer (an aqueous solution of 35% hydroxyethyl methacrylate (HEM- A) and 5% glutaraldehyde was applied on the differently etched surfaces (Group III , Group IV). The 10-0 treatment showed the lowest tensile bond strength, followed by the 10-3 treatment, primer application after the 10-0 treatment and primer application after the 10-3 treatment. The relationship among the surface morphology after pretreatment, fractured surface morphology and tensile bond strength was examined. It revealed that the surface morphology change by different pretreatment influenced the bond strength and the resulting fractured surface morphology. The correlation of tensile bond strength with the fracture morphology was explained.
Graft copolymerization of methlymethacrylate(MMA) onto sodium alginate(SA) aqueous solution by sodium metaperiodate$(NaIO_4)$ as an initiator was carried out with the variation of the reaction time, the reaction temperature and the concentrations of initiator and monomer. The results obtained were as follows: 1. SA was easily separated from the reaction mixture of homopolymer, graft polymer and sodium alginate ungrafted by the treatment of concentrated boiling $Na_3PO_4$, solution with the small amount of $Na_2SO_3$ to the mixture and then isolated as the acid form by acidifying the salts solution containing SA. 2. The amount of graft polymer was larger than that of homopolymer below $70^{\circ}C$ whereas above $70^{\circ}C$ the amount of homopolymer was larger. 3. The sum of each amount of graft polymer ana homopolymer was always increased with increase of the reaction time, the reaction temperature and the concentrations of initiator and monomer. 4. With increase of the concentration of initiator, the graft efficiency was increased below $70^{\circ}C$ while decreased above $70^{\circ}C$. 5. Graft copolymerization of MMA onto SA in aqueous solution was carried out without initiator.
In this research, an organic thin 13 passivation layer was newly adopted to prefect the organic layer from ambient moisture and oxygen. As the organic thin film passivation layer, poly methyl methacrylate thin films (ppMMA) were deposited using a plasma polymerization technique. In order to their passivation performance for OLEDs, water vapor transmission rate (WVTR) of the ppMMAs were analyzed and luminance-current-voltage (L-I-V)/luminance-time (L-T) characteristics of the OLEDs with and without ppMMA passivation layer were investigated. The OLEDs had a structure of ITO/TPD (HTL)/Alq3(EML&ETL)/Al. The OLED with ppMMA passivation layer showed improved L-T performance than that of without ppMMA passivation layer.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.