• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.19 no.2
• /
• pp.45-62
• /
• 2008

A reference ontology for cultural heritage information, CIDOC Conceptual Reference Model (CRM), has promoted cooperation among memory institutions and FRBRoo, re-constructed version of FRBR based on CRM, was developed. In this study, the harmonized ontology version of FRBR, FRBRoo, was analysed and, as a results, the followings are suggested: empowered interoperability for information exchange and integration among cultural institutions and designing more comprehensible inference rules than original FRBR model. Moreover, the by-products of harmonization gave opportunity to recognize internal inconsistencies of the FRBR model and CRM itself and refine them.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.12
• /
• pp.1130-1135
• /
• 2015

The bond pull test is the most widely used technique for the evaluation and control of wire bond quality. The wire being tested is pulled upward until the wire or bond to the die or substrate breaks. The inspector test strength of wire by manually and it takes around 3 minutes to perform the test. In this paper, we develop a 3D vision system to measure 3D position of wire. It gives 3D position data of wire to move a hook into wires. The 3D measurement method to use here is a confocal imaging system. The conventional confocal imaging system is a spot scanning method which has a high resolution and good illumination efficiency. However, a conventional confocal systems has a disadvantage to perform XY axis scanning in order to achieve 3D data in given FOV (Field of View) through spot scanning. We propose a method to improve a parallel mode confocal system using a micro-lens and pin-hole array to remove XY scan. 2D imaging system can detect 2D location of wire and it can reduce time to measure 3D position of wire. In the experimental results, the proposed system can measure 3D position of wire with reasonable accuracy.

• Molecular & Cellular Toxicology
• /
• v.3 no.1
• /
• pp.23-30
• /
• 2007

The effects of high energy short wave solar radiation on human skin have received much publicity as the major cause of accelerated skin ageing and of skin cancers. To meet public demand, the cosmetic industry has developed sun protection factor products, which contain a variety of so-called "UV filters", among others benzophenone (BP) and its metabolites are the widely used UV filters. UV filters are also used to prevent UV light from damaging scents and colors in a variety of cosmetics products and to protect of plastic products against light-induced degradation. There are many variants of BP in use. In this respect, to regulate and to evaluate the hazardous effect of BP-type UV filters will be important to environment and human health. The genotoxicity of 7 BP-type UV filters was evaluated in L5178Y $(tk^{+/-})$ mouse lymphoma cells in vitro. BP, benzhydrol, 4-hydroxybenzophenone 2-hydroxy-4-methoxybenzophenone and 2, 4-dihydroxybenzophenone did not induce significant mutation frequencies both in the presence and absence of metabolic activation system. 2, 2'-Dihydroxy-4-methoxybenzophenone appeared the positive results at the highest dose, i.e. 120.4 ${\mu}g/mL$ only in the absence of metabolic activation system. And also, 2, 3, 4-trihydroxybenzophenone revealed a significant increase of mutation frequencies in the range of 138.1-207.2 ${\mu}g/mL$ in the absence of metabolic activation system and 118.3-354.8 ${\mu}g/mL$ in the presence of metabolic activation system. Through the results of MLA with 7 BP-type UV filters in L5178Y cells in vitro, we may provide the important clues on the genotoxic potentials of these BP-type UV filters.

• Molecular & Cellular Toxicology
• /
• v.3 no.1
• /
• pp.53-59
• /
• 2007

This study was conducted to evaluate the mutagenic potential of dimethyl isophthalate (DMIP) using Ames bacterial reverse mutation test, chromosomal aberration test and mouse lymphoma $tk^{+/-}$ gene assay. As results, in Ames bacterial reversion assay, DMIP was tested up to the concentration of 5,000 ${\mu}g$/plate and did not induce mutagenicity in Salmonella typhimurium strains TA98, TA100, TA1535 and TA1537, and Escherichia coli WP2uvrA with or without metabolic activation (S9 mix). Using cytotoxicity test, the maximal doses of DMIP for chromosomal aberration assay were determined at 1,250 ${\mu}g/mL$, which was a minimum precipitation concentration ($IC_{50}>1,940\;{\mu}g/mL$ or 10 mM) and at 155 ${\mu}g/mL$ ($IC_{50}:155\;{\mu}g/mL$) in the presence and the absence, respectively, of S9 mix. DMIP in the presence of S9 mix induced statistically significant (P<0.001) increases in the number of cells with chromosome aberrations at the dose levels of over 250 ${\mu}g/mL$, when compared with the negative control. However, DMIP in the absence of S9 mix did not caused significant induction in chromosomal aberrant cells. In MLA, DMIP at the dose range of 242.5-1,940 ${\mu}g/mL$ in the presence of S9 mix induced statistically significant increases in mutation frequencies related to small colony growth, whereas any significant mutation frequency was not observed in absence of S9 mix. From these results, it is conclusively suggested that dimethyl isophthalate may be a clastogen rather than a point mutagen.

• Smart Structures and Systems
• /
• v.25 no.5
• /
• pp.605-617
• /
• 2020

The existence of damages in structures causes changes in the physical properties by reducing the modal parameters. In this paper, we develop a two-stages approach based on normalized Modal Strain Energy Damage Indicator (nMSEDI) for quick applications to predict the location of damage. A two-dimensional IsoGeometric Analysis (2D-IGA), Machine Learning Algorithm (MLA) and optimization techniques are combined to create a new tool. In the first stage, we introduce a modified damage identification technique based on frequencies using nMSEDI to locate the potential of damaged elements. In the second stage, after eliminating the healthy elements, the damage index values from nMSEDI are considered as input in the damage quantification algorithm. The hybrid of Teaching-Learning-Based Optimization (TLBO) with Artificial Neural Network (ANN) and Particle Swarm Optimization (PSO) are used along with nMSEDI. The objective of TLBO is to estimate the parameters of PSO-ANN to find a good training based on actual damage and estimated damage. The IGA model is updated using experimental results based on stiffness and mass matrix using the difference between calculated and measured frequencies as objective function. The feasibility and efficiency of nMSEDI-PSO-ANN after finding the best parameters by TLBO are demonstrated through the comparison with nMSEDI-IGA for different scenarios. The result of the analyses indicates that the proposed approach can be used to determine correctly the severity of damage in beam structures.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.979-983
• /
• 2013

The three-dimensional measurement method of confocal systems is a spot scanning method which has a high resolution and good illumination efficiency. However, conventional confocal systems had a weak point in that it has to perform XY axis scanning to achieve FOV (Field of View) vision through spot scanning. There are some methods to improve this problem involving the use of a galvano mirror [1], pin-hole array, etc. Therefore, in this paper we propose a method to improve a parallel mode confocal system using a micro-lens and pin-hole array in a dual microscope configuration. We made an area scan possible by using a combination MLA (Micro Lens Array) and pin-hole array, and used an objective lens to improve the light transmittance and signal-to-noise ratio. Additionally, we made it possible to change the objective lens so that it is possible to select a lens considering the reflection characteristic of the measuring object and proper magnification. We did an experiment using 5X, 2.3X objective lens, and did a calibration of height using a VLSI calibration target.

• The Plant Pathology Journal
• /
• v.16 no.6
• /
• pp.312-317
• /
• 2000

The selected five plant growth-promoting rhizobacteria (PGPR) strains, WR8-3 (Pseudomonas fluorescens), WR8-6 (P. putida), WR9-9 (P. fluorescens), WR9-11 (Pseudomonas sp.), and WR9-16 (P. putida) isolated in the rhizosphere of watermelon plants were tested on their growth promotion and control effect against gummy stem rot of watermelon. Strains, WR8-3 and WR9-16 significantly increased stem length of watermelon, and there was a little increase in leaf area, fresh weight and root length when strains, WR8-3, WR9-9 and WR9-16 were treated. Generally, seed treatment was better for plant growth promotion than the soil drench, but there was no significant difference. Seed treatment and soil drench of each bacterial strain also significantly reduced the mean lesion area (MLA) by gummy stem rot, but there was no significant difference between the two treatments. At initial inoculum densities of each strain ranging from 10$^6\;to\;10^{15}$ cfu/g seed, approximately the same level of disease resistance was induced. But resistance induction was not induced at the initial inoculum density of 10$^3$ cfu/g seed. Resistance was induced by treating the strains, WR9-9, WR9-11 and WR9-16, on all of four watermelon varieties tested, and there was no significant difference in the decrease of gummy stem rot among varieties. Populations of the strains treated initially at log 9-10 cfu/g seed, followed with a rapid decrease from planting day to 1 week after planting, but the population density was maintained above log 5.0 cfu/g soil until 4 weeks after planting. Generally no or very weak in vitro antagonism was observed at the strains treated excepting WR9-11. Rifampicin-resistant bacteria which had been inoculated were not detected in the stems or leaves, which suggesting that the bacterium and the pathogens remained spatially separated during the experiment. This is the first report of rsistance induction in watermelon to gummy stem rot by PGPR strains.

• Design & Manufacturing
• /
• v.2 no.2
• /
• pp.29-32
• /
• 2008

A back light unit (BLU) is a key module of a thin film transistor liquid crystal display (TFT-LCD), frequently utilized in various mobile displays. In this study, we experimentally characterize transcription and optical properties of concave and convex microlens arrays (MLAs) of light guide plate (LGP) fabricated by injection molding with polycarbonate as a LGP substrate material. Nickel mold inserts were manufactured by electroforming on the MLA which was fabricated by the thermal reflow of photoresist microstructures patterned by UV-photolithography. For the case of convex microlens, the height of replicated microlens was less than that of the mold insert while maintaining almost the same microlens diameter of the mold insert as the location of the microlens is far from the gate. In contrast, for the concave microlens, the diameter of replicated microlens was larger than that of mold insert, while showing almost the same microlens height as the mold insert. From the optical examination of replicated convex and concave MLAs, it was found that a higher luminance of the LGP was achieved by the concave MLAs compared to the convex MLAs (about 30% enhancement in this case)due to the utilization of a larger amount of light provided by the light sources.

• Plant Journal
• /
• v.9 no.1
• /
• pp.50-57
• /
• 2013

This study investigates the risks that can occur during the development stage of IPP project in developing countries. In case that ECA and MLA cannot participate due to poor credit rating of the country, the diversification of power purchaser in marginal states can be a great help to reduce both market risk and country risk at the same time. In case of thermal power plants and combined cycle power plants, the effect of performance degradation as time passed will be considered and expected profit of sponsors should be maintained. Recently, developing countries are expanding IPP projects to reduce the financing cost and Korean power companies are positively participating in IPP projects. Accordingly, the loss of Korean companies should be minimized by risk management through the risk mitigation methods of this study.

• Physical Therapy Korea
• /
• v.28 no.2
• /
• pp.132-137
• /
• 2021

Background: Flat feet can be identified by assessing the collapse of the medial longitudinal arch (MLA) and these conditions can trigger epidemiological changes in the feet. Many of previous studies compared the muscle activity of lower body in terms of intervention and dynamics to treat the structural defect of flat feet. However, few studies have investigated or analyzed the muscle activity of gastrocnemius muscle in the subjects with flat feet. Objects: This study investigated the differences in changes of medial and lateral plantar flexors in subjects with flat feet during bipedal heel-rise (BHR) task and analyzed the differences in muscle activity between two groups by measuring the electromyography (EMG) of abductor hallucis (AH), tibialis anterior (TA), medial gastrocnemius (MG), lateral gastrocnemius (LG). Methods: A total of Twenty one adult females participated in this experiment. Subjects were assigned to groups according to the navicular drop test. The task was applied to the leg, where the heel lifting action prevailed. The muscle activity of the medial and lateral feet plantar flexors was evaluated, and the % maximum voluntary isometric contractions (%MVIC) of these were compared. Results: For the difference between groups the muscle activity (%MVIC) of LG muscle was statistically significantly low in flat feet group compared to healthy feet group (flat feet: 64.57, healthy feet: 90.17; p < 0.05). Conclusion: The results of this study will contribute to identifying the muscle activities of medial and lateral feet plantar flexors among subjects with flat feet, which can cause abnormal epidemiological changes in the feet.