• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권5호
• /
• pp.1532-1553
• /
• 2014

Radio spectrum is a precious resource and characterized by fixed allocation policy. However, a large portion of the allocated radio spectrum is underutilized. Conversely, the rapid development of ubiquitous wireless technologies increases the demand for radio spectrum. Cognitive Radio (CR) methodologies have been introduced as a promising approach in detecting the white spaces, allowing the unlicensed users to use the licensed spectrum thus realizing Dynamic Spectrum Access (DSA) in an effective manner. This paper proposes a generalized framework for DSA between the licensed (primary) and unlicensed (secondary) users based on Continuous Time Markov Chain (CTMC) model. We present a spectrum access scheme in the presence of sensing errors based on CTMC which aims to attain optimum spectrum access probabilities for the secondary users. The primary user occupancy is identified by spectrum sensing algorithms and the sensing errors are captured in the form of false alarm and mis-detection. Simulation results show the effectiveness of the proposed spectrum access scheme in terms of the throughput attained by the secondary users, throughput optimization using optimum access probabilities, probability of interference with increasing number of secondary users. The efficacy of the algorithm is analyzed for both imperfect spectrum sensing and perfect spectrum sensing.

• 한국결정성장학회지
• /
• 제4권4호
• /
• pp.378-387
• /
• 1994

선행연구[1] 즉, $Ti0_2/Pb/TiO_2(900{\AA}/900{\AA}/900{\AA}/)$ 3층구조박막으로부터 열확산에 의해 상형성이 가능하였던 $PbTiO_3$ 박막의 특성을 개선하기 위하여 스퍼터링법을 이용하여 Si기판위에 각 요소층의 두께를 $200~300 {\AA}$으로 얇게하고 적층수를 3,5,7,9,11층$(TiO_2/Pb/.../Tio_2)$으로 변화시켜가며 다층구조박막을 형성한 후 이를 RTA 처리하여 $PbTiO_3$ 박막을 제조하였다. 그 결과 $500^{\circ}C$ 이상에서 단일상의 $PbTiO_3$가 형성되었다. 또한 요소층의 두께를 얇게하고 적층수를 늘려서 열처리한 결과 Pb-silicate 및 void 생성이 억제되어 우수한 계면상태를 유지하였으며 조성도 보다 균일해지는 양상을 나타내었다. $PbTiO_3$ 박막의 MiM구조에 C-V 특성으로부터 측정된 유전상수는 열처리 조건에 따른 경향을 나타내지 않았으나 적층수가 많아져 박막의 두께가 증가 할수록 유전상수가 증가하였다. MIS 구조의 $PbTiO_3$ 박막의 I-V 특성 측정 결과 절연파괴강도는 최고 150kV/cm이었다.

• 한국임상수의학회지
• /
• 제19권2호
• /
• pp.195-198
• /
• 2002

개에서 자연적으로 발생한 12예의 종양에 대해, 종양 억제 유전자 p53의 변이와의 관계를 확인해 보았다. 종양조직에서 일반적인 방법으로 DNA를 추출하여, PCR 기법으로 p53을 증폭하여 염기서열을 확인한 결과, 개의 유선암종 예에서 exon 8의 codon 285에서 CCT $\longrightarrow$ TCT (proline $\longrightarrow$ serine)로 점변이 된 것이 확인되었다. 또한 악성 비만세포 종양 예에서도 exon 8의 codon 249에서 AGT $\longrightarrow$AGC로 점변이 된 것이 확인되었으나 silent point mutation (serine)으로 판명되었다. 이상의 결과를 토대로 개의 유선암종과 악성 비만세포 종양에서 종양억제 유전자 p53의 변이가 확인되었으며, 이는 종양의 형성과 관련된 p53의 역할이나 종양의 치료 및 예후 판정에 p53 을 활용하는 연구의 초석이 되리라 사료되며, 차후 이 유전자에 대한 광범위한 연구가 지속되어야 하리라 생각된다.

• Journal of Information Technology Applications and Management
• /
• 제18권3호
• /
• pp.73-89
• /
• 2011

More and more employees are implementing the use of emerging Web 2.0 tools such as blogs, wikis, social networks, etc in workplaces. However, their attitudes towards adoption of Web 2.0 tools in workplaces still lack theoretical support. The purpose of this study aims to provide a conceptual examination of the determinants that influence the intention to use Web 2.0 applications in workplaces in Korea. To achieve this objective, this study selected the theory of reasoned action (TRA) as a theoretical basis to explain variation in behavioral intentions. Structural equation modeling was employed to analyze data collected from 269 workers distributed in 5 companies in Korea. In addition, we classified respondents into extroverts and introverts and delineated the different factors for these two types of respondents that affect their intentions to use Web 2.0 tools in workplaces. The findings of this research could provide a theoretical foundation for academics on the validation of technology adoption. This research will also serve as a guideline for service providers in designing the Web 2.0 services.

• 한국정보시스템학회지:정보시스템연구
• /
• 제8권2호
• /
• pp.5-27
• /
• 1999

The recent development of information technology in general and consolidation of communications and multimedia technology in particular have brought enormous changes in education and training methods in many business organizations. Numerous studies in the education engineering field report that teaching using multimedia technologies will more enhance the education/training performance than the traditional instructor-teaching method. However, in the management information systems field, few studies are found which directly investigated effects of multimedia technologies on education and training. None of multimedia-related studies can be found in the top-ranked MIS journals published in Korea for the last five years, and only a few stuides are found even worldwide. The major steps of the current research are as follows. First, in order to identify important factors constituting the effectiveness of multimedia systems, previous research related to the effectiveness of multimedia systems was reviewed and analyzed. Second, individual items which can be considered as candidates to represent the effectiveness of multimedia systems were derived from this previous research review, and a survey questionnaire was developed using those derived items. Based on the developed survey questionnaire, a pretest was administered at several domestic business firms with experiences of multimedia systems. Third, survey questionnaires were distributed to and collected from the 517 employees which experienced using multimedia systems.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.42-49
• /
• 1997

The extent of absorption and transmitance of the light that passes through some material is changed as the wavelength of the light varies, and which makdes it possible to estimate characteristics of the material. Spectrometer is a measurement system that can analyze the characteristics of material by using this principle. Its application field is so wide that it can be applied to all the arease that are concerned with analyzing materials : biological, environmental, medical and chemical area etc. This study is focused on developing precision sine drive mechanism for grating monochromator which is the most important part of the spectrometers. It is designed to be simple in struicture. It is achieved to derive basic principles to manipu- late precision sine drive mechanism : it should be aligned with a condition that .beta. , the angle between grat- ing normal and grating rod should be the same as .gamma. , the one between moving nut's normal and sliding guide. And also, it's found that the mis-alignments of the grating and mirrors are not the main factor in guaranteeing the linearity of sine drive mechanism. Performance evaluation is achieved by a standard sample by comparing experimental results with standard values. It results in wavelength accuracy of .+-. 0.5nm and resolution of 1nm. Conclusively, it can be verified that the sine drive mechanism developed in this study is not only simple in structure, but also stable and excellent in performanes.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.8-14
• /
• 2008

For nondestructive inspection of electron beam (EB) welding part in automotive power transmission assembly, a pulse-echo ultrasonic testing apparatus in water immersion has been applied using the ultrasonic waves with a frequency of 10MHz. However various problems have appeared during the ultrasonic inspection, which led to some significant mistakes in automatic quality evaluation of the welding parts. Experimental study showed that the state of water couplant medium containing some amount of contaminants, rusts and anti-corrosion agents had considerable influences on the reduction of ultrasonic amplitudes during wave propagation. The amplitude reduction depending on the coupling medium state could bring about some mis-diagnoses for defects in the welding parts. The results proposed that for a reliable inspection of defects in welds the state of water medium should be kept in about 15 volume fractions (vol.%) of anti-corrosion agents and in minimized contaminants.

• 한국ITS학회 논문지
• /
• 제10권6호
• /
• pp.32-39
• /
• 2011

꼬리물기는 교차로에 정체가 발생하면 녹색 현시라도 진입해서는 안 되는데 이를 무시하고 무리하게 진입, 신호가 바뀐 뒤 다른 방향의 차량흐름에 방해를 주는 행위이다. 인력에 의한 단속 방법은 한계가 있어 지속적으로 단속을 하기위해서는 대체 방안이 필요하다고 하겠다. 교차로에서의 꼬리물기 위반를 시스템을 통해 단속가능한 지 여부를 파악하기 위해 실제 현장에서 실험을 통해 평가를 수행하였다. 본 연구에서는 현재 운영 중인 신호위반 단속장비와 달리 위반 차량을 단속하는 시점을 교차로 진출부 횡단보도 부근에서 하였으며, 위반 차량을 역추적 방식으로 궤적을 추적하는 방식을 적용하였다. 현장 실험 결과 시스템에 다음과 같은 결론을 얻었다. 교차로 꼬리물기 위반 차량에 대한 단속 능력, 즉 위반차량 검지율 및 오검지율을 평가한 결과, 평균 검지율은 83.5%, 오단속률은 0.2, 오인식률 1.5%로 나타났다. 따라서 꼬리물기 위반 차량을 무인단속장비에 의해 단속을 할 수 있을 것으로 판단된다.

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1220-1226
• /
• 2012

This paper proposes a novel type of tactile device utilizing magnetorheological(MR) fluid which can be applicable for haptic master of minimally invasive surgery(MIS) robotic system. The salient feature of the controllability of rheological properties by the intensity of the magnetic field(or current) makes this potential candidate of the tactile device. As a first step, an appropriate size of the tactile device is designed and manufactured via magnetic analysis. Secondly, in order to determine proper input magnetic field the repulsive forces of the real body parts such as hand and neck are measured. Subsequently, the repulsive forces of the tactile device are measured by dividing 5 areas. The final step of this work is to obtain desired force in real implementation. Thus, in order to demonstrate this goal a neuro-fuzzy logic is applied to get the desired repulsive force and the error between the desired and actual force is evaluated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.415-420
• /
• 2012

This paper proposes a novel type of tactile device utilizing magnetorheological (MR) fluid which can be applicable for haptic master of minimally invasive surgery (MIS) robotic system. The salient feature of the controllability of rheological properties by the intensity of the magnetic field (or current) makes this potential candidate of the tactile device. As a first step, an appropriate size of the tactile device is designed and manufactured via magnetic analysis. Secondly, in order to determine proper input magnetic field the repulsive forces of the real body parts such as hand and neck are measured. Subsequently, the repulsive forces of the tactile device are measured by dividing 5 areas. The final step of this work is to obtain desired force in real implementation. Thus, in order to demonstrate this goal a neuro-fuzzy logic is applied to get the desired repulsive force and the error between the desired and actual force is evaluated.