• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.4
• /
• pp.455-460
• /
• 2008

Powered activated carbon(PAC) has been widely applied for controling odor causing compounds(OCCs) from water treatment plants. Because of their volatility, the OCCs can also be removed from water by air stripping methods. In this study, OCCs removal was tested with PAC adsorption, air stripping, and both PAC adsorption and air stripping from the Taecheong lake water. Removal efficiency of OCCs in terms of threshold odor number(TON) were 39.6% by both PAC (15mg/L) adsorption and aeration for 30 min, 33.6% by PAC(15mg/L) adsorption alone for 30 min, and 22.9% by aeration alone for 30 min, respectively. OCCs could be removed up to 50% by aeration for 120 min without PAC adsorption. At an extended aeration with 15mg/L of PAC, OCCs removal occurred mainly by PAC adsorption within 30 min aeration while it continued by air stripping afterward. At simulated jar tests with the raw water, removal efficiencies of geosmin and MIB were 48.3, 36.1% by coagulation and sedimentation without PAC addition. With 15mg/L of PAC on the same jar tests, the removal efficiencies were 83.1, 60.1%, respectively. Without PAC, OCCs could be possibly removed by stripping during the agitation processes.

• Journal of Korea Foundry Society
• /
• v.32 no.6
• /
• pp.284-288
• /
• 2012

The effects of Si content on the variation of microstructure and processing window of austempered ductile cast iron were investigated. Four different Si contents between 2.42 and 3.37 wt.% were used. The influence of silicon on the microstructure and processing window of these materials were studied. Austenitizing was performed at $900^{\circ}C$ for 60min and austempering temperature were both $340^{\circ}C$ and $360^{\circ}C$ and austempering time were for 4min upto 119min and for 5min upto 160min respectively. After heat treatment, the evolution of stage I and stage II were performed by optical metallography, XRD, hardness test. The results showed that $t_2$ was delayed as Si contents was increased due to the fact that Si retarded the formation of cementite ($Fe_3C$). The high silicon content promoted the stability of the metastable two-phase combination of austenite and ausferrite.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1585-1591
• /
• 2008

Recently it is tried to use load control for maneuver moving object. MIN design method proposed to solve control problem of nonlinear system using load concept. Min design method shows direct method for finding control value on the load control model. In this paper, is shown load control value for problem of line of sight on missile guidance. The load control value keep given velocity of missile and angle of attack for tracking target.

• Textile Coloration and Finishing
• /
• v.14 no.4
• /
• pp.197-207
• /
• 2002

The physical properties and dyeability of the nylon 6 fibers prepared by high speed spinning at take-up speed of 4,100~5,600m/min were investigated. The strain decreased as the take-up speed was raised from 4,100m/min to 4,400m/min, but further increase of take-up speed could not decrease the strain. The stresses of the fibers spinned at various take-up speed did not make any noticeable differences. Birefringences, densities and crystallinities of the fibers increased with the take-up speed and then reached to a nearly maximum value at 5,300m/min. In DSC diagrams, the $\gamma$ form of crystal became dominant at higher take-up speed. The dye uptakes of C. I. Acid Blue 113 on the fibers decreased a little with the increase of take-up speed.

• Journal of the Korean Ceramic Society
• /
• v.30 no.6
• /
• pp.469-477
• /
• 1993

Residual stresses is one of the major factors to degrade the magnetic properties of VCR magnetic heads. Vicker's indentation technique was adapted to estimate the residual stresses Residual stresses and distribution in the glass and ferrite were obtained after bonding ferrite with glass, varing the cooling rate. The compressive and tensile stresses were developed in the interface and gradually decreased with increasing distance from the interface. The stresses were decreased with a cooling rate. The mean values of residual stress in ferrite were 10MN/㎡, 8MN/㎡, 5MN/㎡ with cooling rate 10℃/min, 5℃/min, 1℃/min respectively. When the bonded sample was annealed above the glass transition temperature followed by cooling at 5℃/min cooling rate, the residual stress was reduced to 6MN/㎡.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.1
• /
• pp.18-24
• /
• 2013

In order to apply the design method of diagonal flow fan based on axial flow design to the design of radial-outflow type diagonal flow fan which has lower specific speed of 600-700 [$min^{-1}$, $m^3/min$, m], radial-outflow type diagonal flow fan which specific speed was 670 [$min^{-1}$, $m^3/min$, m] was designed by a quasi three-dimensional design method. Experimental investigations were conducted by fan characteristics test, flow surveys by a five-hole probe and a hot wire probe. Fan characteristics test agreed well with the design values. In the flow survey at rotor outlet, the characteristic region was observed. Two flow phenomena are considered as the cause of the characteristic region, one is tip leakage vortex near rotor tip and another is pressure surface separation on the rotor blade.

• Journal of the East Asian Society of Dietary Life
• /
• v.6 no.3
• /
• pp.317-323
• /
• 1996

Physicochemical characteristics of Cassia tora seeds roasted at different conditions were investigated. Intact Cassia tora seeds were composed of water 11.6% crude protein 13.1%, crude fat 4.4%, curde fiber 13.8%, N-free extract 47.2% and ash 4.9%. Stacking volume ratio was increased generally by swelling, but soluble solids were decreased by rosating process L and B values decreased conspicuously as roasting temperature increase, but $\Delta$E value increased. The content of anthraquinones was 1, 200mg% in unroasted Cassia tora seeds, it increased as roasting time and temperature increase and reached maxium amount at 19$0^{\circ}C$-30min, 21$0^{\circ}C$-20min. and 23$0^{\circ}C$-10min. agter that it decreased remarkably. Optimum roasting condition of Cassia tora seeds was 21$0^{\circ}C$-20min.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1435-1438
• /
• 2009

Hydrothermal treatment of rice hull was hydrothermal carried out at 105, 110, $121^{\circ}C$ for 15, 30, 60 min, respectively, using a conventional autoclave. Antioxidant activity of the hydrothermal treated rice hull extract was evaluated by determining total phenol contents (TPC), 1,1-diphenyl-2-picylhydrazyl (DPPH) radical scavenging activity (RSA), reducing power, and ABTS RSA. TPC, DPPH RSA, reducing power, and 2,2-azinobis(3-ethylenebenzothiozoline-6-sulfonic acid) (ABTS) RSA of the extract were significantly increased with increasing treated temperature and time. For example, hydrothermal extracts at $121^{\circ}C$ for 60 min increased the TPC, DPPH RSA, reducing power, and ABTS RSA to 0.840 mg/mL, 64.77%, 1.437, and 92.11%, respectively, while those of the extracts treated at $105^{\circ}C$ for 60 min were 0.508 mg/mL, 51.23%, 0.819, and 45.22%, respectively. The results indicated that hydrothermal treatment of rice hull was very effective to increase phenolic compounds and antioxidant activity of rice hull extract.

• Journal of Environmental Health Sciences
• /
• v.23 no.4
• /
• pp.39-44
• /
• 1997

Propionaldehyde, n-Butyraldehyde, n-Valeraldehyde 수용액에 주파수 200 kHz, 출력 6.0 W/cm$^2$의 초음파조사후 그 분해반응에 관해 고찰했다. Aldehyde류는 초음파 조사에 의해 빠르게 분해되었고, 분해형태는 유사1차 반응을 나타내었다. 이들의 분해 속도는 Propionaldehyde

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.2
• /
• pp.97-106
• /
• 2022

In this study, H&E staining is necessary to distinguish cells. However, dyeing directly requires a lot of money and time. The purpose is to convert the phase image of unstained cells to the amplitude image of stained cells. Image data taken with FPM was created with Phase image and Amplitude image using Matlab's parameters. Through normalization, a visually identifiable image was obtained. Through normalization, a visually distinguishable image was obtained. Using the GAN algorithm, a Fake Amplitude image similar to the Real Amplitude image was created based on the Phase image, and cells were distinguished by objectification using MASK R-CNN with the Fake Amplitude image As a result of the study, D loss max is 3.3e-1, min is 6.8e-2, G loss max is 6.9e-2, min is 2.9e-2, A loss max is 5.8e-1, min is 1.2e-1, Mask R-CNN max is 1.9e0, and min is 3.2e-1.