• Korea Journal of Hospital Management
• /
• v.27 no.2
• /
• pp.53-66
• /
• 2022

Aim : The purpose of this study is to investigate the influence of the awareness level of the mandatory employment system for the disabled and the help of the employment increase on the health status of the disabled. Based on this, the purpose of this study is to raise awareness of the compulsory employment system for the disabled and to suggest a way to improve the health of the disabled. Methods : In this study, the first data of the second wave of the 2016-2018 Employment Panel Survey for the Disabled was used to analyze the participation of the disabled in economic activities. a total of 1,648 subjects were analyzed using the chi-square test and generalized estimating equation (GEE). Results : Compared to the group knowing about the compulsory employment system for the disabled, in the group who did not know about the compulsory employment system, the cognitive level was significantly higher for subjective health status (Odds Ratio [OR]: 1.573, 95% Confidence Interval [CI]: 1.252-1.977) and chronic diseases (OR: 1.407, 95% CI: 1.091-1.816), Compared to the group that the compulsory employment system for the disabled is helpful in increasing employment, the group that said it was not helpful at all had depression feel (OR: 2.330, 95% CI: 1.219-4.452) and subjective health status (OR: 2.052, 95% CI: 1.232. -3.416) significantly affected. Conclusion : It was found that the lower the level of awareness and help of the compulsory employment system for the disabled, the negative impact on their health status. Therefore, it is necessary to promote employment growth by raising awareness of the employment system for the disabled. Furthermore, in order to improve the health of the disabled, public relations plans to increase the understanding of the disabled on the system and policies to protect the disabled people who lose their will to work due to difficulties in accessing employment were enacted, and Changes to a disability-friendly working environment should be activated so that participants can participate.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.61-72
• /
• 2022

The present study was conducted to examine the effect of soybean silage as a crude protein supplement for corn silage in the diet of Hanwoo steers. The first experiment was conducted to evaluate the effect of replacing corn silage with soybean silage at different levels on rumen fermentation characteristics in vitro. Commercially-purchased corn silage was replaced with 0, 4, 8, or 12% of soybean silage. Half gram of the substrate was added to 50 mL of buffer and rumen fluid from Hanwoo cows, and then incubated at 39℃ for 0, 3, 6, 12, 24, and 48 h. At 24 h, the pH of the control (corn silage only) was lower (p<0.05) than that of soybean-supplemented silages, and the pH numerically increased along with increasing proportions of soybean silage. Other rumen parameters, including gas production, ammonia nitrogen, and total volatile fatty acids, were variable. However, they tended to increase with increasing proportions of soybean silage. In the second experiment, 60 Hanwoo steers were allocated to one of three dietary treatments, namely, CON (concentrate with Italian ryegrass), CS (concentrate with corn silage), CS4% (concentrate with corn silage and 4% of soybean silage). Animals were offered experimental diets for 110 days during the growing period and then finished with typified beef diets that were commercially available to evaluate the effect of soybean silage on animal performance and meat quality. With the soybean silage, the weight gain and feed efficiency of the animal were more significant than those of the other treatments during the growing period (p<0.05). However, the dietary treatments had little effect on meat quality except for meat color. In conclusion, corn silage mixed with soybean silage even at a lower level provided a greater ruminal environment and animal performances, particularly with increased carcass weight and feed efficiency during growing period.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.79-88
• /
• 2022

This study was conducted to evaluate the productivity of whole crop silage wheat utilizing the paddy fields during a couple of years from 2019 to 2021 in Suwon, Korea. This investigation was used the two maturity types of wheat cultivar 'Cheongwoo' (early) and 'Taeu' (late). The heading date of 2^nd year (Oct. 2020 to May. 2021) cultivation was delayed about 11 to 13 days by more than 1^st year (Oct. 2019 to May. 2020). The growth characteristics were shown that the plant height was increased in 2^nd cultivation, while the number of culms and the panicle part ratio were decreased. Moreover, the nutritive value of 'Cheongwoo' and 'Taeu' were also decreased in 2^nd cultivation. These changes have thought to a difference of the precipitation by cultivation years. Because, the precipitation during the period from the end of winter dormancy to the harvesting stage in 2^nd (337 mm) cultivation was more about twice than 1st (169.3 mm) cultivation. However, the dry matter yield of 'Cheongwoo' was not shown a statistical difference by cultivation years, while 'Taeu' was shown to decrease tendency. The total dry matter yield regardless of the cultivation years were higher in 'Cheongwoo' than 'Taeu', and especially 'Cheongwoo' was more 3 tons per hectare (15.3 t/ha) than 'Taeu' (12.6 t/ha) at 2^nd cultivation (p<0.01). The trend of dry weight in 'Cheongwoo', early mature type, showed a relatively high ratio of dry matter (p<0.05) was considered that due to a high panicle ratio by a fast heading and an adequate weight of panicles by a sufficient maturing. In conclusion, selecting the early maturity cultivars could achieve a higher and more stable total dry matter yield considering the cropping system in the central region. Furthermore, it also has the advantage of being able to double-cropping system with forage rice, which has considered the maximum whole-crop forage production year-round. These results suggest that the 'Cheongwoo' be optimum cultivar to produce the year-round forage on paddy fields in the central region.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.231-238
• /
• 2022

Purpose. This study aimed to investigate the effect of different veneering methods on the tensile bond strength between polyetherketoneketone (PEKK) and denture base resins. Materials and methods. A total of 80 PEKK T-shaped specimens were fabricated and the primer (Visio.link) was applied after airborne-particle abrasion with 110 ㎛ alumina oxide powder. According to the veneering method, the specimens were divided into four groups (n = 20) to be veneered with the gingival colored packable photopolymerized composite resin (SR Adoro); flowable photopolymerized composite resin, (Crea.lign); heat-polymerized resin (Vertex); and self-polymerized resin (ProBase Cold). Each group was divided into two subgroups (n = 10) according to the artificial thermal aging. After the tensile bond strength measurement via universal testing machine, the fracture sections of all specimens were observed. Two-way ANOVA and Tukey's HSD post hoc test were used for the statistical analysis (α = .05). Results. The results of the two-way ANOVA showed statistically significant differences in the tensile bond strength according to the veneering method and artificial thermal aging of denture base resins (P<.001). The highest tensile bond strength showed in the packable photopolymerized resin group before and after the artificial thermal aging. The lowest tensile bond strength showed in the heat-polymerized resin group. The mixed and adhesive fracture showed in all groups. Conclusion. The veneering method and artificial thermal aging can influence in the tensile bond strength between the resin and PEKK. The artificial thermal aging can reduce the tensile bond strength.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.111-120
• /
• 2022

Improving flour quality is one of the major targets of wheat breeding programs. This study determined the optimum high-molecular-weight glutenin subunits (HMW-GS) to improve flour quality, and analyzed the correlation between agronomic and quality traits in Korea. A total of 180 wheat varieties, including 55 Korean and 125 foreign cultivars, carrying various Glu-1 alleles, were evaluated for their quality and agronomic traits. Results indicated that Glu-A1b, Glu-B1b, and Glu-D1f were the most prevailing alleles for each Glu-1 locus for Korean wheat cultivars. Korean wheat cultivars recorded shorter days to heading (DTH) and longer days to maturity (DTM) compared to foreign cultivars. In addition, an interaction effect was found between Glu-A1 and Glu-B1 alleles on several quality parameters. The combination of Glu-A1c and Glu-B1i showed a higher protein content, dry gluten content, and higher sodium dodecyl sulfate (SDS) sedimentation value than other Glu-A1×Glu-B1 combinations. Cultivars carrying Glu-A1a or Glu-A1b, Glu-B1i or Glu-B1al, and Glu-D1d for each Glu-1 locus exhibited a longer mixing time and stronger mixing tolerance. The DTM positively correlated with the protein content, gluten index and SDS sedimentation value. However, a negative correlation was observed between DTH and quality traits. Owing to the above results, this study suggests that an increase in the frequency of Glu-B1i or Glu-B1al, Glu-D1d coupled with a short DTH and long DTM could significantly improve wheat quality properties.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.1
• /
• pp.131-142
• /
• 2021

Purpose: Clinical practicums via non-face-to-face methods were inevitable due to the COVID-19 pandemic. We developed an online program for emergency nursing care and identified the feasibility of the program and the learning achievements of students. Methods: This was a methodological study. The program was developed by three professors who taught theory and clinical practicum for adult nursing care and clinical experts. Students received four hours of video content and two task activities every week in four-week program. Real-time interactive video conferences were included. Qualitative and qualitative data were collected. Results: A total of 96 students participated in the program. The mean score for overall satisfaction with the online program was 4.72(±1.02) out of 6. Subjects that generally had high learning achievement scores were basic life support care, fall prevention, nursing documentation, infection control, and anaphylaxis care. As a result of a content analysis of 77 reflective logs on the advantages of this program, students reported that "experience in applying nursing process," "case-based learning and teaching method," and "No time and space constraints" were the program's best features. Conclusion: Collaboration between hospitals and universities for nursing is more important than ever to develop online content for effective clinical practicum.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.3
• /
• pp.1-23
• /
• 2022

This study examined the perceptions of Myanmar university students and professors regarding the status and necessity of higher education programs in fashion. Data were collected from professors in textile engineering at Yangon Technological University and Myanmar university students. Closed- and open-ended questions were asked either through interviews or by email. The responses were analyzed using keyword extraction and categorization, and descriptive statistics(closed questions). Generally, the professors perceived higher education, as well as the cultural industries including art and fashion, as important for Myanmar's social and economic development. According to the students interests in pursuing a degree in textile were limited, despite the high interest in fashion. Low wages in the apparel industry and lack of fashion degrees that meet the demand of students were cited as reasons. The demand was high for educational programs in fashion product development, fashion design, pattern-making, fashion marketing, branding, management, costume history, and cultural studies. Students expected to find their future career in textiles and clothing factories. Many students wanted to be hired by global fashion brands for higher salaries and training for advanced knowledge and technical skills. They perceived advanced fashion education programs will have various positive effects on Myanmar's national economy.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.63-71
• /
• 2022

In this study, the interfacial reaction and drop impact reliability of Sn-Ag-Cu (SAC) solder and electroless nickel autocatalytic gold (ENAG) were studied. In addition, the solder joint properties with the ENAG surface finish was compared with electroless nickel immersion gold (ENIG) and electroless nickel electroless palladium immersion gold (ENEPIG). The IMC thickness of SAC/ENAG and SAC/ENEPIG were 1.15 and 1.12 ㎛, respectively, which were similar each other. The IMC thickness of the SAC/ENIG was 2.99 ㎛, which was about two times higher than that of SAC/ENAG. Moreover, it was found that the IMC thickness of the solder joint was affected by the metal turnover (MTO) condition of the electroless Ni(P) plating solution, and it was found that the IMC thickness increased when the MTO increased from 0 to 3. The shear strength of SAC/ENEPIG was the highest, followed by SAC/ENAG and SAC/ENIG. It was found that when the MTO increased, the shear strength was lowered. In terms of brittle fracture, SAC/ENEPIG was the lowest among the three joints, followed by SAC/ENAG and SAC/ENIG. Likewise, it was found that as MTO increased, brittle fracture increased. In the drop impact test, it was confirmed that the 0 MTO condition had a higher average number of failures than the 3 MTO condition, and the average number of failures was also higher in the order of SAC/ENEIG, SAC/ENAG, and SAC/ENIG. As a result of observing the fracture surface after the drop impact, it was found that the fracture was between the IMC and the Ni(P) layer.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.189-196
• /
• 2022

Plasma refers to an ionized gas that is often referred to as "the fourth phase of matter", following solid, liquid, and gas. Plasma has traditionally been utilized for industrial applications such as welding and neon signs, but its promise in biomedical fields such as cancer treatment and dermatology has lately been recognized. Indeed, due to its beneficial effects in promoting collagen production, improving skin tone, and eliminating harmful bacteria in the skin, plasma treatment constitutes an important target for dermatological research. In this study, a plasma device for cosmetic manufacturing based on nitrogen, the main component of the atmosphere, was designed and assembled. Moreover, nitric oxide (NO) was selected since is easier to follow and evaluate than other nitrogen plasma active species, and its contents were measured to perform a quantitative and qualitative evaluation of plasma. First, an injection method, using different proximities labeled "sinking" and "non sinking" treatments, was performed to test the most efficient plasma treatment method. As a result, it was observed that the formulation obtained by a non sinking treatment was more effective. Furthermore, toner and ampoule were selected as cosmetics formulations, and the characteristics of the formulation and changes in the injected plasma state were observed. In both formulations, the successful injection of NO plasma was 2 times higher in toner formulation than ampoule formulation, and it gradually decreased with time, having dissipated after a week. It was confirmed that the nitrogen plasma used did not affect the stability of the toner and ampoule formulations at low temperature (4 ℃), room temperature (25 ℃), and high temperature (37 ℃ and 50 ℃) conditions. The results of this study demonstrate the potential of plasma cosmetics and highlight the importance of securing the stability of the injected plasma.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.491-497
• /
• 2021

Purpose: To investigate the prevalence of osteoporosis or osteopenia via dual-energy X-ray absorptiometry bone mineral density (DEXA BMD) in adult males who showed radiolucent lumbar vertebra on the plain radiographs. Materials and Methods: The DEXA BMD values of 98 adult males, who showed radiolucent vertebrae on plain X-rays, were compared with those of the control group (n=168) and osteoporosis-related fracture group (n=113) by statistical analysis. The World Health Organization (WHO) method (lower value between the mean lumbar and femur neck) and the Hansen's method (lowest lumbar vertebra) were used to determine osteoporosis. Results: The mean and standard deviation of the BMD value of each group was -1.4 (±1.2) in the suspicious group, -0.8 (±1.1) in the control group, and -2.4 (±1.0) in the fracture group, respectively; the difference was statistically significant. Using the WHO method, the prevalence ratio of osteoporosis was 17.3% in the suspicious group, 8.3% in the control group, and 45.1% in the fracture group, respectively. Osteopenia was observed in 40.8% of the suspicious group. Hansen's method (lowest lumbar vertebra) revealed the prevalence of osteoporosis in 30.6% of the suspicious group, 17.9% of the control group, and 62.0% of the fracture group. Conclusion: Approximately 17.3% of the suspicious group was diagnosed with osteoporosis, and 40.8% were osteopenic by a confirmative BMD study (WHO criteria) among the adult males showing apparent radiolucency on plain X-rays. The control group also showed an 8% prevalence of osteoporosis. These results suggest that males also are vulnerable to osteoporosis. Therefore, a BMD study should also be used for males, especially for the people showing lumbar vertebrae with radiolucent features.