• 프린팅코리아
• /
• s.1
• /
• pp.74-76
• /
• 2002

• 프린팅코리아
• /
• s.2
• /
• pp.76-78
• /
• 2002

• The Korean Journal of Physiology
• /
• v.1 no.1
• /
• pp.91-101
• /
• 1967

The maximal oxygen intake (MOI) was determined in 54 males (23 nonathletes, 10 basketball players, 8 hand ball players, 7 weight lifters and 6 long distance runners) and in 49 females (24 non-athletes, 16 basketball players and 9 volley ball players) by using a treadmill method outlined in Part I of the present investigation and the following results were obtained: (1) The maximal aerobic work capacity varied from the lowest value of 1,008 kg-m/min in female non-athletes to the highest value of approximately 2,000 kg-m/min in male basketball players and long distance runners. Values of other groups varied from 1,400 kg-m/min in male non-athletes and female athletes to 1,800 kg-m/min in male hand ball players. (2) The MOI per unit body weight varied from the lowest value of 41.3 ml/min/kg in female non-athletes to the highest value of 67.6 ml/min/kg in male long distance runners. Values of other groups were in the order of 47 to 55 ml/min/kg. (3) The heart rate during maximal aerobic work performance varied from the lowest value of approximately 180 per min in female basketball players and male long distance runners to the highest value of 190 or above in nonathletes of both sexes. (4) An estimate of oxygen debt as measured during 15 minutes following the maximal work was 3.841 in female non-athletes, 4.681 in female athletes, 5.561 in male non-athletes and 6.321 in male athletes. These results indicate that the MOI per unit body weight as well as the oxygen debt of Korean non-athletes were comparable to, while corresponding values of Korean athletes were considerably lower than, those of other countries such as Japan, the United States of America and Europe.

• Journal of radiological science and technology
• /
• v.38 no.1
• /
• pp.17-21
• /
• 2015

Total body irradiation(TBI) and chemotherapy are the pre-treatment method of a stem cell transplantations of the childhood leukemia. in this study, we evaluate the Quantitative human body dose prior to the treatment. The MCNPX simulation program evaluated by changing the material of the tissue compensators with imitation material of pediatric exposure in a virtual space. As a result, first, the average skin dose with the material of the tissue compensators of Plexiglass tissue compensators is 74.60 mGy/min, Al is 73.96 mGy/min, Cu is 72.26 mGy/min and Pb 67.90 mGy/min respectively. Second, regardless of the tissue compensators material that organ dose were thyroid, gentile, digestive system, brain, lungs, kidneys higher in order. Finally, the ideal distance between body compensator and the patient were 50 cm aparting each other. In conclusion, tissue compensators Al, Cu, Pb are able to replace of the currently used in Plexiglass materials.

• Journal of the Korean Dietetic Association
• /
• v.7 no.1
• /
• pp.38-49
• /
• 2001

This study was designed to analyze the dietetic practitioner's job in the over 600-ed hospitals in korea and to assess their labor time spent and staffing need indices. The actual time spent and expected labor time spent on dietitians' activities were investigated and the proper dietic staffing needs in the hospitals was also calculated. A job analysis questionnaires were developed and mailed to 20 hospitals. Completed questionnaires were received form 12 hospitals for a response rate of 60%. The followings are summary of the results. 1. The jobs dietitians at the hospitals were classified into the following 7 areas, direct patient care, indirect patient care, therapeutic patient care, education & counseling, meeting & research, delay & movement, and administration & food services. 2. The actual time spent on dietetic practice was 48.6 hours and expected labor time spent was 99.2 hours, Therefore, the proper time required to conduct classified jobs was 2.1 times higher than the time spent. Especially, the time required for performing clinical nutrition services including direct patient care, indirect patient care, therapeutic patient care was significantly higher than the time needed. 3. The average times required for the direct patient care was 1334.6min, for the indirect patient care was 796.3min, for the therapeutic patient care was 1634.5min, for the education & counseling was 265.2min, for the meeting & research was 366.7min, for the delay & movement was 327.3min, and for the administration & food services was 1170min. The staffing need indices was 12.3. As a conclusion, the standardized job descriptions for the dietitian to carry out their job at the hospital should be established. And the clinical dietitians as nutrition professionals have to be recruited to provide systematically hospitalized patients with medical nutrition therapy at each hospital.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.463-469
• /
• 2015

Bisphenol A (BPA) in aqueous solution was measured using HPLC technique, which was established by acetonitrile analysis and KDP solution analysis methods. In these experiments the decomposition characteristics of BPA were compared using the ozone alone, ozone/pH 10, and ozone/hydrogen peroxide processes. About 70% of 10 mg/L of BPA was removed during 60 min by the ozone alone process, while 10 mg/L of BPA was completely removed by the ozone/pH 10 and ozone/hydrogen peroxide processes in 40 min and 60 min, respectively. The final decomposition efficiency drawn from results of TOC and HPLC analyses showed that the ozone/hydrogen peroxide process was the best among them, whereas the concentrations of TOC and reaction intermediates when using the ozone/pH 10 process were higher than those of the ozone alone process after 60 min of reaction. The ozone/hydrogen peroxide process was the most efficient among them when oxidizing organic carbons in water to $CO_2$ and $H_2O$.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.949-954
• /
• 2006

The purpose of this paper is to develop water jet plasma reactor and investigate the optimal condition of the syngas production by reforming of hydrocarbon fuel. Fuel used was propane and plasma was generated by arc discharge on water jet surface. Discharge slipping over the water surface has a number of advantages such as a source of short-wave and UV radiation, and it can be used for biological and chemical purification of water. Parametric screening studies were conducted, in which there were the variations of power ($0.18{\sim}0.74$ kW), water jet flow rate($38.4{\sim}65.6$ mL/min), electrode gap($5{\sim}15$ mm) and treatment time($2{\sim}20$ min). When the variations were 0.4 kW, 53.9 mL/min, 10 mm and 20 min respectively, result of maximum $H_2$ concentration was 61.6%, intermediates concentration were 6.1% and propane conversion rate was 99.8%.

• The Korean Journal of Community Living Science
• /
• v.13 no.3
• /
• pp.53-68
• /
• 2002

The purposes of this study were to explore amount of time use for paid work house work, child caring and leisure spent by adults and to explain its influencing factors. Tobit model was used to analyze the factors of time use because the amount of time use was a limited continuous variable. The results of this study were as follows: 1) Amount of time spent for paid work per day by adults was found to be 349 min. for men and 185 min. for women. Amount of time spent for house work was found to be 19min. for men and 155 min. for women. Amount of time spent for child caring was found to be 5min. for men and 40 min. for women. Amount of time spent for leisure was found to be 285 min. for men and 266 min. for women. 2) Time use for paid work was found to be significantly influenced by householder, age, time limit and paid worker for men and householder, time limit and paid worker for women. Time use for house work was found to be significantly influenced by age, time limit and paid worker for men and householder, age, marital status and paid worker for women. Time use for child caring was found to be significantly influenced by presence of kids and marital status for men and house, presence of kids, marital status and paid worker for women. Finally, Time use for leisure was found to be significantly influenced by car, time limit and paid worker for men and house, presence of kids, marital status, time limit and paid worker for women.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.88-95
• /
• 1989

This experiment 'was conducted to investigate the grazing cattle's palatability by the method of grazing time on the pasture dominated orchardgrass and on the pasture dominated perennial ryegrass from June to October, 1987. The experiment was carried out on the experimental field at Livestock Ex- Experiment Station. The results are summarized as follows: 1. In summer, the grazing time on the pasture dominated orchardgrass increased in 49.7 min, 57.4 min, 102 min, 118.7 min, respectively as sward height decreased in 50 cm, 45 cm, 35 cm, 23 cm, respectively and their correlation coefficiet was -0.9722*(P <0.05). 2. In autumn, the grazing time on the pasture dominated perennial ryegrass decreased in 182 min, 98.5 min, 49.4 min, 31.9 min, respectively as sward height decreased in 43 cm, 34 cm, 25 cm, 18 cm, respectively and their correlation coefficient was 0.9684*. (P <0.05). 3. Grazing time increased as sward height increased on the pasture dominated perennial ryegrass because the composition rate of orchardgrass and red clover which were palatability on the plot of the high sward height.was many. It was suggested that the factor that could be first related to palatability on mixture pasture was the factor of species than the factor of sward height. 4. When the eating rate on the plot of the low sward height was over 55% as the grazing day went by, it gradually decreased because the eating rate on it was high but the fresh yield was low. After all it seemed that it affected palatability because forage availability on the plot of the low sward height was degenerating.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.197-202
• /
• 2001

The influence of thermal treatment and cold drawing was investigated for poly(ethy1ene terephthalate) films fabricated with various experimental conditions. Samples were elongated at room temperature under stepwise-drawing condition with the cross-head speed kom 0.5 to 500 mrdmin in an universal tester. Stress oscillation was observed in the stress-stnin curve of the samples heat-treatd at 50, 72 and $129^{\circ}C$ for 30 min, but it was not observed in the samples heat-treatd at $83^{\circ}C$ for 30 min. Thermal analyses of the samples were carried out in differential scanning calorimeter at the heating rate df $10^{\circ}C$/min/min, and the glass transition temperature, crystallization peak, enthalpy of fusion and degree of crystallinity were measured. The dynamic mechanical analyses of the samples were also carried out in a multiplefimction internal kiction pendulum at 1 Hz with the heating rate of $1.5^{\circ}C$/min, and it was found that the elastic modulus increases in the order of non-treated, heat-treated, and elongated samples.