• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10C
• /
• pp.936-941
• /
• 2003

Density evolution was developed as a method for computing the capacity of low-density parity-check(LDPC) codes under the sum-product algorithm [1]. Based on the assumption that the passed messages on the belief propagation model can be approximated well by Gaussian random variables, a modified and simplified version of density evolution technique was introduced in [2]. Recently, the min-sum algorithm was applied to the density evolution of LDPC codes as an alternative decoding algorithm in [3]. Next question is how the min-sum algorithm is combined with a Gaussian approximation. In this paper, the capacity of various rate LDPC codes is obtained using the min-sum algorithm combined with the Gaussian approximation, which gives a simplest way of LDPC code analysis. Unlike the sum-product algorithm, the symmetry condition [4] is not maintained in the min-sum algorithm. Therefore, the variance as well as the mean of Gaussian distribution are recursively computed in this analysis. It is also shown that the min-sum threshold under a gaussian approximation is well matched to the simulation results.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.4
• /
• pp.119-130
• /
• 2002

Objective: The purpose of this research was to use data for furnish quality physical therapy service. The research subjects were admitted shoulder pain patients treated with physical therapy that was to grasp physical therapy method as distinguishing application time. Subject: Total number of distributed questionnaire was 563 persons that was to utilized physical therapy room of 56th medical institution and distributed it to each physical therapist in charge. Method: The research used questionnaire in order to research itemized treatment application time that is according to physical therapy method to applicated with shoulder pain patient. The research contents is to received shoulder pain diagnosis period, total duration of utilizing physical therapy room, the number of times per week to used physical therapy room, etc. And we had physical therapist recording the time of application physical therapy method come under the items. Result: The average treatment time was 59.2 minutes at all patients. During this time, 39.7 min was modality treatment. Active movement treatment was only 7.1 min. Total treatment time was longest in general hospital at 64.9 min, it was shortest in clinical hospital at 53.3 min. Treatment time was difference as hospital scale(p<0.001). Active movement treatment time was longest in general hospital at 11.5 min. The average treatment time was 4.5 min in clinical hospital. Therefore, it was related to hospital scale(p<0.05). The average of manual therapy time by physical therapist was 7.5 min. General hospital was linger at 8.6 min than clinical hospital at 6.7 min(p<0.05). Patient of 90.2 % were treated to hot pack, ultra-sound treatment was next as 50.1%. Active strengthening exercise was most carrying out of the active treatment as 25.4 %. Active sensorimotor exercise was practiced only 28 persons of 5.0 %. Most joint mobilization (38.4 %) was used of the passive manual therapy items, next to soft tissue mobilization (33.0 %), and next to manual distraction therapy(14.0 %).

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.297-304
• /
• 2011

Ramen flour formulation was optimized by applying a mixture experimental design. In the optimization, the overall palatability (OP) of cooked ramen and the rheological properties of selected dough were maximized or minimized. Blended ratios of the ingredients such as Dark Northern Spring (DNS), Hard Red Winter (HRW), and Soft White (SW) were designed on a simplex-lattice. Dough rheological properties were measured by Rapid Visco Analyser (RVA), Farinograph, and Extensograph, and the overall palatability by sensory evaluation. Several principal dough rheological properties such as RVA peak viscosity (PV), Farinograph development time (DT), and Extensograph resistance/extensibility after 45 min (R/E 45 min) were selected to influence the overall palatability by canonical correlation analysis (CCA). Goals of the optimization were given as OP maximized, PV maximized, DT minimized, and R/E at 45 min maximized. The optimization results were found to be DNS 33.3%, HRW 33.3%, and SW 33.3% with OP, 5.825; PV, 587.9 cP; DT, 3.1 min; R/E at 45 min, 2.339 BU/mm.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.1
• /
• pp.45-55
• /
• 2022

PURPOSE. This in vitro study investigates the effect of different post-rinsing times and methods on the trueness and precision of denture base resin manufactured through stereolithography. MATERIALS AND METHODS. Ninety clear photopolymer resin specimens were fabricated and divided into nine groups (n = 10) based on rinsing times and methods. All specimens were rinsed with 99% isopropanol alcohol for 5, 10, and 15 min using three methods-automated, ultrasonic cleaning, and hand washing. The specimens were polymerized for 30 min at 40℃. For trueness, the scanned intaglio surface of each SLA denture base was superimposed on the original standard tessellation language (STL) file using best-fit alignment (n = 10). For precision, the scanned intaglio surface of the STL file in each specimen group was superimposed across each specimen (n = 45). The root mean square error (RMSE) was measured, and the data were analyzed statistically through one-way ANOVA and Tukey test (α < .05). RESULTS. The 10-min automated group exhibited the lowest RMSE. For trueness, this was significantly different from specimens in the 5-min hand-washed group (P < .05). For precision, this was significantly different from those of other groups (P < .05), except for the 15-min automated and 15-min ultrasonic groups. The color map results indicated that the 10-min automated method exhibited the most uniform distribution of the intaglio surface adaptation. CONCLUSION. The optimal postprocessing rinsing times and methods for achieving clear photopolymer resin were found to be the automated method with rinsing times of 10 and 15 min, and the ultrasonic method with a rinsing time of 15 min.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.153-162
• /
• 2023

It is important to determine water movement at the growing substrate used in soil-less cultivation for better management of water supply. Numerical simulation is a fast and versatile approach to evaluate highly accurate water distribution. The objective of this study is to simulate the water movement in rockwool as a soil-less medium using HYDRUS-2D. HYDRUS-2D was used to simulate the spatial and temporal water movement in two types of rockwool slabs (Floriculture (FL), high density; Expert (EP), low density). The simulation was performed at two pulse conditions: 10 min ON and 50 min OFF (case A), 20 min ON and 40 min OFF (case B). The total irrigation amounts were the same at both cases. In case A, during the irrigation ON, the water contents at FL increased 1.93-fold faster than the values at EP. Whereas, during the irrigation OFF, the decreasing rate of water contents at FL was almost the same as one at EP. At case B, these values were not changed much from case A. However, the duration of optimum water content (50% - 80%) was 15.0 min and 23.5 min at case A and case B, respectively. Thus, FL and 20 min ON and 40 min OFF (case B) could supply water to rockwool much faster and longer than EP. Once qualitatively validated, this simulation of water movement in rockwool could be used to design an effective optimum irrigation method for vegetables.

• New & Renewable Energy
• /
• v.9 no.3
• /
• pp.29-35
• /
• 2013

This research analyzed the fuel characteristic change of spent coffee bean by torrefaction. The calorific value was increased from 4,974 kcal/kg to 6,075 kcal/kg ($260^{\circ}C$, 30min), 6,452 kcal/kg ($270^{\circ}C$, 30min), 6,823 kcal/kg ($280^{\circ}C$, 30min), 6,970 kcal/kg ($260^{\circ}C$, 30min). The highest energy yield was obtained when the spent coffee bean were torrefied on the condition of $280^{\circ}C$, 30min. The moisture absorption rate was decreased from 5.12% to 2.76% when the spent coffee bean were torrefied on the condition of $290^{\circ}C$, 30min. Lignin was increased from 11.33% to 14.39% on the condition of $260^{\circ}C$ 30min. But it did not preferability to torrefy spent coffee bean at temperature of more than $270^{\circ}C$ because lignin decreases to the level that is hard to make pellet.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.656-659
• /
• 2009

직접메탄올형 연료전지(Direct Methanol Fuel Cell)는 휴대용으로 사용할 수 있는 소형 전원용으로 주로 개발되고 있으며, 다양한 용도로 사용이 가능하다. 하지만 직접메탄올연료전지에서 전해질로 많이 쓰이는 Nafion막은 이를 통한 메탄올 크로스오버(Crossover) 때문에 연료전지의 성능을 제한시키고 있다. 본 연구에서는 Nafion 117를 사용하여 전극 면적 100cm2 의 DFMC용 MEA를 제작하고, 공기 유량을 3ml/mim으로 고정하고, 메탄올 유량을 2,3 ml/min로 각각 공기극와 연료극에 공급하여 온도변화(50, 60, 70, $80^{\circ}C$)에 따른 성능을 확인하였다. DMFC의 적당 반응 온도는 $70^{\circ}C$로 생각되고, 유량은 메탄올 2ml/min, 공기 3ml/min유량 공급시가 성능이 높게 나오는 결과를 얻으나 일정시간 지나면 성능이 메탄올 3ml/min, 공기 3ml/min유량 공급시 보다 성능이 떨어지는 현상이 일어나기 때문에 $70^{\circ}C$ 반응온도에 메탄올 3ml/min, 공기 3ml/min의 유량 공급이 본 논문에서 최적화된 성능을 내는 조건으로 사료된다.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.43-46
• /
• 1997

The interfacial bond strength and microstructural analysis of pre-heat treated porcelain-fused-metal (PFM) were investigated using a mechanical three-point bending tester and scanning electron microscope(SEM). Four kinds of heat treated samples were prepared as follows; A: heating $1200^{\circ}F\rightarrow1600^{\circ}F$, holding 1min, reheating $\rightarrow1850^{\circ}F$, hold 3min under vacuum, B: heating $1200^{\circ}F\rightarrow1600^{\circ}F$ holding 1min, reheating $\rightarrow1850^{\circ}F$ under vacuum condition, C: heating $1200^{\circ}F\rightarrow1600^{\circ}F$, holding 1min, reheating $\rightarrow1850^{\circ}F$, holding 3min in the air, repeat same heat treatment process under vacuum condition, D: heating $1200^{\circ}F\rightarrow1600^{\circ}F$, holding 1min, reheating $\rightarrow1850^{\circ}F$, holding 1min in the air. The three-point bending test results shows that the interfacial bond strength of specimen B and C were higher than that of A and B. The SEM study reveals that Specimen C shows the highest surface density.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.20-25
• /
• 2006

In this paper, the performance of Tree-LDPC code is presented based on the min-sum algorithm with scaling and the asymptotic performance in the water fall region is shown by density evolution. We presents that the Tree-LDPC code show a significant performance gain by scaling with the optimal scaling factor which is obtained by density evolution methods. We also show that the performance of min-sum with scaling is as good as the performance of sum-product while the decoding complexity of min-sum algorithm is much lower than that of sum-product algorithm. The Tree-LDPC decoder is implemented on a FPGA chip with a small interleaver size.

• Journal of Ecology and Environment
• /
• v.33 no.2
• /
• pp.149-155
• /
• 2010

This study was conducted to investigate the feeding efficiency of the cattle egret (Bubulcus ibis) and the intermediate egret (Ardea intermedia) in relation to the stage of rice culture during two breeding seasons, 2006 and 2007, in Asan city, Chungcheongnam-do, South Korea. Cattle egrets caught mainly small invertebrate prey (insects and spiders, 98.4%) during all stages of rice cultivation, and had a higher prey capture rate in the plowing stage (14.98 prey/min) than in other stages (2.82-3.51 prey/min). Therefore, the biomass intake rate of cattle egrets was highest in the plowing stage. The intermediate egret captured both loaches (43.4%) and small invertebrates (50.6%). The prey capture rates of intermediate egrets increased gradually from the flooding stage (0.38 prey/min) to the planting stage (1.09 prey/min), and decreased in the growing stage (1.04 prey/min). However, intermediate egrets had the highest biomass intake rates in the plowing stage because more loaches were caught in the plowing stage (0.54 loaches/min) than other stages (0.23-0.36 loaches/min). Consequently, both intermediate egrets and cattle egrets had high energy intakes in the plowing stage and rice fields provided an important feeding habitat for both species.