• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.18-24
• /
• 2010

This paper propose a dual-layer beam-forming technique for MIMO-OFDM systems. Dual-layer beam-forming is a capacity enhancing technique to transmit two streams of source data with more than two transmit and receive antennas. Beamforming is a technique to enhance the link-level performances gain using antenna array with the small inter element distance. The proposed scheme can obtain both high capacity of spatial multiplexing and antenna array gain of beamforming for MIMO-OFDM systems. Therefore, it provides better BER performance than the traditional spatial multiplexing and beamforming techniques under the same simulation environment.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.466-469
• /
• 2011

최근 무선전송에서 SISO(single input singe output) 시스템의 전송률이 샤논 한계(Shannon limit)에 근접함에 따라, 이것을 극복하여 더 높은 데이터 전송률을 얻기 위해 MIMO(multiple input multiple output) 시스템에 대한 연구가 활발하게 이루어지고 있다. 현재 진행 중인 DVB-NGH 시스템 표준화에도 전송률 개선을 위해 MIMO SM(Spatial Multiplexing) 기술에 대해 고려하고 있으며, 방송 시스템 내 송수신 안테나들 간 상관(correlation)이 발생하는 경우에 성능 개선을 위해 Precoding과 MIMO SM을 결합한 $2{\times}2$ 구조의 MIMO SM 방법이 제안되었다. 이 방법은 두 개의 송신안테나에 모두 16QAM 신호가 전송되는 경우와 두 송신안테나에 각각 16QAM, QPSK 신호가 전송되는 경우를 포함하고 있다. 이때 고출력 증폭기(high power amplifier) 전단에서 두 송신 안테나에 서로 다른 변조가 적용되는 경우에 PAPR(peak-to-average power ratio)이 달라서 고출력 증폭기 출력단의 송신전력 차이로 인해 각 신호의 방송권역(coverage)이 같지 않은 문제가 발생한다. 본 논문은 이러한 문제를 극복하기 위해 $2{\times}2$ MIMO SM 방식에서 송신 안테나별로 신호의 변조방식이 서로 다른 경우에 송신신호의 PAPR을 같게 하여 증폭기 출력단에서 각 송신신호의 전력이 동일하게 할 수 있는 방법을 제안한다. 제안한 방법은 수신기의 복잡도를 증가시키지 않으면서 두 송신 신호의 방송권역을 동일하게 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.376-383
• /
• 2012

In this paper, we provide a general expression of spatial multiplexing gain (SMG) for two mutually interfering multiple-input multiple-output (MIMO) broadcast channels, referred to as MIMO-IBC, when some of user messages are made available to base stations through a common noiseless backbone line. The MIMO-IBC has two base stations and multiple users, each equipped with multiple antennas, where independent messages are transmitted over fixed channels. From the derived results, we observe the variation of the SMG with respect to the presence of a coordination as well as various antenna distributions, and compare the derived result to the SMG of the case with full cooperation among users.

• International journal of advanced smart convergence
• /
• v.7 no.3
• /
• pp.37-43
• /
• 2018

Lattice-reduction (LR) techniques have been developed for signal detection in spatial multiplexing multiple input multiple output (MIMO) systems to obtain the largest diversity gain. Thus, an LR-assisted zero-forcing (ZF) receiver can achieve the maximum diversity gain in spatial multiplexing MIMO systems. In this paper, a simplified analysis of the achievable diversity gain is presented by fitting the channel coefficients lattice-reduced by a complex Lenstra-Lenstra-$Lov{\acute{a}}z$ (LLL) algorithm into approximated Gaussian random variables. It will be shown that the maximum diversity gain corresponding to two times the number of receive antennas can be achieved by the LR-based ZF detector. In addition, the approximated bit error rate (BER) expression is also derived. Finally, the analytical BER performance is comparatively studied with the simulated results.

• Journal of Advanced Information Technology and Convergence
• /
• v.10 no.1
• /
• pp.1-14
• /
• 2020

Antenna selection is a method to enhance the performance of spatial multiplexing multiple-input multiple-output (MIMO) systems, which can achieve the diversity order of the full MIMO systems. Although various selection criteria have been studied in the literature, they should be adjusted to the detection operation implemented at the receiver. In this paper, antenna selection methods that optimize the post-processing signal-to-noise ratio (SNR) and eigenvalue are considered for the lattice reduction (LR)-based receiver. To develop a complexity-efficient antenna selection algorithm, the incremental selection strategy is adopted. Moreover, for improvement of performance, an additional iterative selection method is presented in combination with an incremental strategy.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.80-84
• /
• 2007

In this paper, the introductory study of the multi input multi output (MIMO) techniques for satellite communication systems is presented. Because of the advantage of wide coverage of satellite, it has been considered for broadcasting services and fill-in services. On the other hand, state of the art multi input multi output (MIMO) techniques such as space time code (STC) and spatial multiplexing (SM) makes the terrestrial system increase link performance and their coverage, and also increase the link throughput. For these regard, in order to satisfy the requirements of the next generation communications and coexists with terrestrial systems harmoniously, the studying about satellite MIMO techniques is necessary. In this paper, we introduce some system model and scenarios to apply MIMO technique to intermediate module repeater (IMR). The possibility of these techniques and technical requirements are also considered. Especially, Space time code is used to enhance IMRs coverage and increase the link performance, and space time multiplexing is utilized to multiplex satellite broadcasting signals with local broadcasting signal in IMR cell.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.1-7
• /
• 2009

In this paper, the author presents the MIMO(Multi-Input Multi-Output) receiver algorithm with the capability of inter-cell or inter-sector interference cancellation over multi-antenna OFDM(Orthogonal Frequency Division Multiplexing) systems. As contrast with the previous research dealing with the filtering scheme at the time domain, the proposed algorithm is presented as the pre-filtering scheme which can be applicable to the frequency domain. Note that the proposed one can be implemented only by pilot symbols which are used in the channel estimation. In addition, it is analytically confirmed that the proposed scheme can be applied for either MIMO( C-SM(Collaborative-Spatial Multiplexing)) interference or SIMO(Single-Input Multi-Out) interference. The proposed receiver algorithm is verified by simulations over UL-PUSC SR off in IEEE 802.16e standard. From simulation results, it is confirmed that the proposed one can be applicable regardless of the kind of interference. Furthermore, it is verified that the performance is guaranteed even under Ole severe effect of interference and the improvement of system throughput is guaranteed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.9
• /
• pp.1-8
• /
• 2007

In this paper, the new beamforming is proposed for an orthogonal frequency division multiplexing(OFDM) system with multi-input multi-output(MIMO). Through the proposed Pre-FFT beamforming technique for MIMO-OFDM, the multibeams are formed toward each multi-transmitter antenna of the desired user. The proposed beamforming for MIMO-OFDM can reduce cochannel interference and get diversity gain in the multi-user environment. Therefore, the performance of MIMO-OFDM system is very improved. BER performance improvement of the proposed approach is investigated through computer simulation by applying it to MIMO-OFDM system in the multi-user environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2365-2382
• /
• 2014

While single-user spatial multiplexing multiple-input multiple-output (SU-MIMO) allows spatially multiplexed data streams to be transmitted to one node at a time, multi-user spatial multiplexing MIMO (MU-MIMO) enables the simultaneous transmission to multiple nodes. However, if the transmission time required to send packets to each node varies considerably, MU-MIMO may fail to utilize the available MIMO capacity to its full potential. The transmission time typically depends upon two factors: the link quality of the selected channel and the data length (packet size). To utilize the cumulative capacity of multiple channels in MIMO applications, the assignment of channels to each node should be controlled according to the measured channel quality or the transmission queue status of the node.A MAC protocol design that can switch between MU-MIMO and multiple SU-MIMO transmissions by considering the channel quality and queue status information prior to the actual data transmission (i.e., by exchanging control packets between transmitter and receiver pairs) could address such issues in a simple but in attractive way. In this study, we propose a new MAC protocol that is capable of performing such switching and thereby improve the system performance of very high throughput WLANs. The detailed performance analysis demonstrates that greater benefits can be obtained using the proposed scheme, as compared to conventional MU-MIMO transmission schemes.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.447-448
• /
• 2008

This paper presents a low-complexity design and implementation results of a multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) symbol detector for high speed wireless LAN (WLAN) systems. The proposed spatial division multiplexing (SDM) symbol detector is designed by HDL and synthesized to gate-level circuits using 0.18um CMOS library. The total gate count for the symbol detector is 238K.