• ETRI Journal
• /
• v.46 no.2
• /
• pp.184-193
• /
• 2024

This paper presents the performance evaluation of an amplify-and-forward (AF) relay-assisted multiuser multiple input-multiple output (MU-MIMO) downlink transmission system for correlated fading channels. The overall system performance was improved by incorporating a double-quadrature spatial modulation (DQSM) scheme. The bit error rate (BER) performance and detection complexity of the AF-MU-MIMO-DQSM system were analyzed and compared with those of a conventional AF-MU-MIMO system under the same conditions and parameters. The results showed that the correlated fading channel severely affected the performance of systems with higher spectral efficiency (SE). Considering an SE of 12 bpcu/user, the AF-MU-MIMO-DQSM system yielded a gain of up to 3 dB in BER performance compared with that of its conventional counterpart for the analyzed cases. In terms of detection complexity, the AF-MU-MIMO-DQSM system showed a reduction of up to 56 % compared with that of the conventional system for the optimal maximum likelihood detection criterion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.929-936
• /
• 2009

In this paper, we consider designing a multi-input multi-output (MIMO) overlay system for fixed MIMO wireless link, where a frequency flat narrowband channel is shared by multiple transmitter and receiver pairs. Assuming the perfect knowledge of the second-order statistics of the received legacy signals and the composite channels from the overlay transmitter to the legacy receivers, the jointly optimal linear precoder and decoder matrices of the MIMO overlay system is derived to minimize the total mean squared error (MSE) of the data symbol vector, subject to total average transmission power and zero interference induced to legacy MIMO systems already existing in the frequency band of interest. Furthermore, the necessary and sufficient condition for the existence of the optimal solution is also derived.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1271-1277
• /
• 2008

This paper proposes the code acquisition scheme on a MIMO channel for preamble search in a CDMA-MIMO uplink system. The multiple transmit/receive antennas are used for beamforming. The performance of a ML code acquisition technique based on transmit and receive beamforming is analyzed by considering rho detection probability. The acquisition performance and MAT for a MIMO code acquisition system are numerically evaluated. It is shown that multiple transmit antennas can give the code acquisition system a transmit beamforming gain and result in much better performance than a SIMO case.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.3
• /
• pp.22-30
• /
• 2010

This paper proposes a combination system of Adaptive Modulation and Coding (AMC) and Multiple Input Multiple Output (MIMO), which improves the throughput and has a better reliability. In addition, the system includes Precoding, Antenna Subset Selection and MIMO Mode Selection scheme. Finally, we make a performance analysis of the proposed system. The principal environmental parameters for the simulation experiment consist of a frequency non-selective rayleigh fading channel and a Spreading Factor (SF) of 16. Other parameters may be included in order to fulfill the requirements of the HSDP A Standard. The proposed system has a higher throughput and more reliability than the conventional system, which does not include MIMO Mode Selection scheme, Precoding or Antenna Subset Selection. According to the simulation results, the proposed system reaches the maximum throughput at 8dB, presentlng an improvement of 6dB and twice higher throughput, respect to the conventional system. Specifically, at the point of -6dB, the conventional system reaches 2.5Mbps, while the proposed system reaches 6.4Mbps at the same SNR. Also, at the point of 2dB, each system reaches 7.5Mbps (conventional system) and 15.3Mbps (proposed system), with near twice the difference. According to the results exposed above, we can conclude that the system proposed in this paper has, as the greatest contribution, the improvement of the throughput, especially, the average throughput.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.652-657
• /
• 2003

In this paper, Adaptive Modulation and Coding (AMC) is combined with Multiple Input Multiple Output (MIMO) multiplexing to improve the throughput performance of AMC. In addition, a system that adopts Selection Transmit Diversity (STD) in the AMC-MIMO multiplexing system is proposed. The received SNR is improved by adopting STD techniques. And it increases probability of selecting MCS (Modulation and Coding Scheme) level that supports higher data rate. This leads to an increased throughput of the AMC-MIMO system. STD in our simulation selects 2 transmission antennas from 4 antennas and AMC-MIMO multiplexing process operates with the selected antennas. The computer simulation is performed in flat Rayleigh fading channel. The results show that the proposed system achieves a gain of 1Mbps over the AMC-MIMO multiplexing system with the same number of antennas at 15dB SNR.

• Journal of Digital Contents Society
• /
• v.6 no.3
• /
• pp.137-142
• /
• 2005

CDMA scheme has received a great deal of attenttion as a multiple-access method for future mobile networks. Its main advantage: are higher radio capacity and the capacity of flexible data tranmission. And CDMA scheme is a key technology in the proposals submitted to the ITU on next generation multimedia system with integrated services, namely real-time voice services and non real-time data services. In this paper, capacity evaluation of multiple-input multiple-output(MIMO) Multi-Carrier(MC)/CDMA system is considered to mitigate multiple access interference, partial-band interference and enhance system channel capacity in wireless channel. Recently, to increase the spectrum efficiency and the link reliability, MIMO-MC/CDMA scheme is devised to exploit multi-path in a scattering wireless channel. In particular, the channel capacity of MIMO-MC/CDMA system is evaluated according to Eb/No. Mc, p and B. From the results, in order to inappropriate spacing and the signals are frequency overlapped by partial band interference, the channel capacity of MIMO-MC/CDMA system becomes substantially smaller.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.10-17
• /
• 2006

For orthogonal frequency division multiplexing (OFDM), cyclic prefix (CP) should be longer than the length of channel impulse response, resulting in a loss of bandwidth efficiency. In this letter, the CP reconstruction (CPR) technique is first applied to a multi-input multi-output (MIMO)-OFDM system with insufficient CP. The intercarrier interference (ICI) from multiple transmit antennas is so large for MIMO system that it can not be sufficiently suppressed with the conventional CPR procedure used in single-input single-output (SISO) system. A new minimum mean-square error (MMSE) equalization and ordering process is proposed for MIMO system to suppress the ICI during the CPR procedure. By applying the proposed CPR algerian to MIMO-OFDM system, we can obtain both the benefits of multiplexing gai and spectral efficiency gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1181-1185
• /
• 2005

A combining of MIMO signal processing with OFDM is regarded as a promising solution of enhancing the performance of next generation wireless system. Therefore, in this paper, an OFDM-based wireless system employing layered space-time architecture is considered for a high-rate transmission. In the MIMO-OFDM system, we evaluate the PAR performance using the SLM approaches. The investigated SLM scheme for MIMO-OFDM signals selects the transmitted sequence with lowest average PAR over all transmitting antennas and retrieves the side information very accurately at the expense of a slight degradation of the PAR performance. The low probability of false side information can improve the overall detection performance of the MIMO-OFDM system with erroneous side information compared to the ordinary SLM approache, respectively. Also, we provide closed form of the average BER performance in MIMO-OFDM system using analytic approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.501-506
• /
• 2010

The proposal set out in this paper, is the Adaptive-MCM(Modulation, Coding and MIMO) system, which results from the combination of adaptive modulation and coding (AMC) and multiple input multiple output (MIMO) schemes. The performance of this system is analyzed through computer simulation. By using the MIMO scheme adaptively as well, the proposed Adaptive-MCM system, presents a better improvement of data rate and error performance compared to the AMC system. The throughput performance of the Adaptive-MCM system is analyzed and compared with the throughput performance of Non-Adaptive-MCM Systems. As a result of the simulation, we can infer that, at a fixed MCM level, there is an improvement of the trade-off between secure Signal to Noise Ratio (SNR) and a high data rate. Consequently, this trade-off improvement results in a better average data rate.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.88-95
• /
• 2007

In this paper, we suggest the novel MIMO-UWB transceiver structure which can easily be adapted for various MIMO schemes and presents MIMO channel model for obtaining correlation characteristics among channels to analyze the performance. From the indoor channel modeling, we obtain the interferences among antennas due to the MIMO channel formation through numerical simulation and analyze the performance of MIMO-UWB system under frequency selective fading. Especially, to reduce the excessive computational complexity due to the inverse matrix computation of channel transfer function, we take the scheme combining the transmitting signals estimated from each receiving antenna after recovering each transmitting antenna signal from a receiving antenna.