• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.271-271
• /
• 2010

$BaTiO_3$(BT) has high permittivity so that has been applied to dielectric and insulator materials in 3D system-level package integration. In order to achieve excellent performance of device, the BT layer should be highly dense. In this study, BT thick films were prepared by the inkjet printing method. And these films were cured at $280^{\circ}C$ after infiltration of polymer resin. As a result, we have successfully fabricated not only the inkjet-printed hybrid BT film but also metal-insulator-metal(MIM) capacitor without sintering process. Changes in the dielectric constant of BT hybrid film with particle size and packing density were investigated. The dielectric constant was increased with increasing packing density and particle size. Further, the BT hybrid film using two different size particles had even higher packing density and dielectric constant.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.148-148
• /
• 2008

Low-k dielectric materials are an alternative plan to improve the signal propagation delay, crosstalk, dynamic power consumption due to resistance and parasitic capacitance generated the decrease of device size. Now, various materials is studied for the next generation. Diethoxymethlysiliane (DEMS) precursor using this study has two ethoxy groups along with one methyl group attached to the silicon atoms. SiCOH thin films were deposited on p-type Si(100) substrate by Plasma Enhanced Chemical Vapor Deposition (PECVD) using DEMS. In this study, we studied the effect of oxygen($O_2$) flow rate for DEMS to characteristics of thin films. The characteristics of thin films deposited using DEMS and $O_2$ evaluated through refractive index, dielectric constant(k), surface roughness, I-V(MIM:Al / SiCOH / Ag), C-V(MIM), deposition rate.

• 전자공학회논문지 IE
• /
• 제49권1호
• /
• pp.7-11
• /
• 2012

본 논문에서는 인지질 단분자인 DMPC 유기초박막에 압력 자극을 이용하여 표면압과 변위전류의 검출에 따른 유전 완화현상에 대한 물리적 특성 평가를 하였다. 유기초박막에서 약간의 유전 완화 시간이 소요되었는데 이는 분자 영역에 의존한다는 사실을 알 수 있었다. 또한, 유기박막의 누적 조건에 의해 제작된 MIM 소자에 전압을 인가시, LB막의 누적층수가 증가 할수록 저항이 증가한다는 것을 알 수 있었는데 이는 유기초박막의 층수가 증가하여 전극간의 거리가 멀어질수록 더 높은 전계에서도 파괴되지 않는 절연특성이 나타남을 알 수 있었으며 나노단위의 유기초박막의 비교적 양호한 절연성을 확인, 제시 하였다.

• 품질경영학회지
• /
• 제43권4호
• /
• pp.545-558
• /
• 2015

Purpose: The Purposes of this study are (1) to examine why users are communicating through MIM (2) to understand what factors impact these users' satisfaction and loyalty. Methods: We use a questionnaire survey to collect 256 data on users' perceptions of Kakaotalk. We also use a structural equation modeling method by using AMOS 18.0. Results: Company trust, communication voice, connectedness, and perceived network size are found to be statistically significant factors affecting. Also, satisfaction influence on word of mouth and intention to switch. Conclusion: This study develops a research model from the MIM context. We suggest three points of view as company characteristics, device interactivity, and social factor. We examine the determinants of users' satisfaction and loyalty. The results can offer valuable insights for future mobile services research.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.202-205
• /
• 1997

In this paper, we synthesized poly(N-(2-4-imidazolyl) ethyl) maleimide-alt-1-octadecene(IMI-O) polymer that can have function group and improvement of mechnical strength and then confirmed the possibility of molecular device made by LB method. Evaluation of LB film have been processed such as the technique of EA, $^{1}$H-NMR, FT-IR. Also, the deposition status was observed by SEM and Metal/Insulator/Metal(MIM) device was fabricated for investigation of electric properties. In our experimental results. The surface pressure for the solid state was investigated to 20~35[dyne/cm] by the $\pi$ -A isotherm and the limiting area was about 40 ~45 ($\AA$$^2$/molecule). The deposition status of LB films was confirmed by SEM. The conductivity of LB film was found to be 10$^{-14}$ ~10$^{-13}$ [S/cm] by I-V characteristic.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.33-36
• /
• 2009

In this paper, evaluation of physical properties was made for dielectric relaxation phenomena by the detection of the surface pressures and displacements current on the monolayer films of fatty acid monomolecular Arachidic Acid, Stearic Acid using compressing velocity. LB(Langmuir-Blodgett) thin films were manufacture by detecting deposition for the accumulation and the current was measured after the electric bias was applied across the manufactured MIM device. The physicochemical properties of the fatty acid monomolecular Arachidic Acid, Stearic Acid films surface structure has been studied by AFM. We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is gas state, liquid state, solid state. Formation that prevent when gas phase state and liquid phase state measure but could know organic matter that molecules form equal and stable film when molecules were not distributed evenly, and accumulated in solid state only.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1572-1574
• /
• 2002

In this paper, we discuss the electrical properties of self-assembled (2'-amino-4,4-di(ethynylp henyl)-5'-nitro-1-(thioacetyl)benzene), which has been well known as a conducting molecule having possible application to molecular level NDR device. The phenomenon of negative differential resi(NDR) is characterized by decreasing current th a junction at increasing voltage, also fabricatio MIM-type molecular electronic device and the Molecular Level Using Scanning Tunneling Microscopy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1519-1521
• /
• 1997

In this paper, poly (N-(2-4-imidazolyl) ethyl) maleimide-alt-1-octadecene (IMI-O) polymer which can complex metal ion was used to confirm the possibility of molecular device made by Langmuir-Blodgett method. Metal/Insulator/Metal (MIM) device was fabricated for investigation of electric properties. In the ${\pi}$-A isotherm, surface pressure at collapse point was different as to the molecular weight of metal ion complexed respectively, In I-V characteristics, currents of MiM devices were different at the same voltage. It was thought that phenomena was occurred by interaction between function group and metal ion.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.917-919
• /
• 2009

Effects of nano-silver contents(15~50wt%) on screen printed-etched gate electrodes and electrical characteristics of OTFTs were investigated. As Ag contents increased, the screen-printed film was transferred exactly without spreading and obtained the densely-packed layer with a stable and excellent conductivity but, its thickness was increased and surface became rougher. It was found that the leakage current of MIM devices and off-state currents of OTFTs became larger due to poor step coverage of PVP dielectric layer on the thick and rough gate electrodes for nano-Ag inks with Ag contents more than 30wt%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1327-1329
• /
• 2006

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 2, 10, 30[mN/m](gas state, liquid state, and solid state). The physicochemical properties of the LB films on the surface of pure water are studied by AFM. Also, we then examined of the Metal-Insulator-Metal(MIM) device by means of I-V.