• Progress in Superconductivity
• /
• v.4 no.2
• /
• pp.180-183
• /
• 2003

We evaluated the effect of alloying-element additions to Ag sheath on thermal conductivity of Bi-2223 superconductor tapes. In order to evaluate the effect of sheath alloys and their configuration on the properties of tape, various combinations of Ag and Ag alloys were selected as inner and outer sheath. Thermal conductivity of the tapes was measured by using thermal integral method at 10∼120 K. It is observed that the presence of alloying-elements such as Mg, Sb, and Au in Ag sheath results in decreased thermal conductivity at low temperature. Specifically, the thermal conductivity of AgMg, AgSb, and AgAu at 40 K were 411.4, 142.3, and 109.7 W/(m·K), respectively, which is about 2∼9 times lower than that of Ag (1004.6 W/(m·K)). In addition, the thermal conductivity of alloy-sheathed tape was significantly dependent on their values of constituent sheath materials.

• International Journal of Costume and Fashion
• /
• v.5 no.1
• /
• pp.75-89
• /
• 2005

The purpose of this study is to empirically ascertain how the fitness between marketing strategy each firm chooses and environment facing each firm affects the performance of firms measured by the growth rate of market share and the growth rate of profit/sales ratio. In doing so, firms are divided into three groups. With regard to the marketing strategy, firms are classified into three groups based on marketing strategy type; prospector, analyzer, and defender. The main result of this study are as follows: First, responding firms are classified into prospector, analyzer, and defender following Miles & Snow's marketing strategy types. This classification is made using a self typing method and further confirmed by a factor analysis using a number of variables relating marketing objectives and marketing mix. Second, the results show that there are significant differences across marketing strategies in the performance measures of the growth rate of market share and profit/sales ratio. It seems, however, that there is no straight forward relationship between the marketing strategy and the performance measures. This strongly implies that the type of marketing strategy to be adopted by each firm should depend on the environment facing each firm. Third, the result indicates that the growth rate of market share tends to depend only on the marketing strategy type regardless of sufficiency and variation of environment, but profit/sales ratio tends to depend on the fitness between marketing strategy type and environment. It implies that a firm should adopt different marketing strategies for different environment characteristics, in order to enhance the efficiency of resources used reflected in the profit/sales ratio.

• Journal of Fashion Business
• /
• v.21 no.3
• /
• pp.80-92
• /
• 2017

Fashion trend is more than a social phenomenon that multitudes of people accept as popular styles of clothing. The purpose of this study was to understand the influence of fashion trend over time and distance. Geographically thousands of miles apart, the U.S. has strongly influenced fashion in Korea, revealed by references and historic depictions collected from literature and web sites. Results of the study are summarized as five issues: First, emergence of female missionaries from the U.S. American missionaries working in the late Great Korean Empire performed a significant role importing Western culture to Korea. Second, as opportunities of education increased, women studying abroad introduced Western fashion to Koreans when they returned to Korea. They were more open to Western culture than other Koreans and moderately harmonized their Korean sentiment and Western culture, mitigating cultural shock and enabled other Koreans to accept Western culture. Third, the effect of fashionistas on media. Singers working for U.S. armies stationed in Korea and movie stars appearing in Hollywood movies profoundly affected Korean pop culture and fashion trends in Korea. Fourth, following First Lady Jacqueline Kennedy of the U.S. She was an influential figure in those days and a fashion leader as well. Lastly, acceptance of working girl fashion depicted in American television shows. American working girls depicted on American TV shows were highly admired by young Korean women, so the fashion of American working girls became a major fad among young Korean women.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.3
• /
• pp.227-234
• /
• 2012

This paper describes the remote monitoring of breaking ocean waves generated by Typhoon Nabi, whose name means butterfly in Korean, using a marine X-band radar in the Yongho Man, Busan, Korea. The basic purpose of this study is to investigate the dynamic behavior and to estimate the periods of breaking waves across the surf zone from radar image sequences. In these experiments, the land-based radar system imaged the inshore zone of three miles from the coastline to a isobath of 30 meters. The wave period and the dominant wave direction for breaking ocean waves extracted directly from radar image sequences were 157.4 meters and 298 degrees, respectively. However, the result calculated quantitatively by the continuous wavelet transform (CWT) showed that the period of breaking waves was 154.3 meters. The average difference in breaking wave periods between the value extracted by using EBRL (electronic bearing and range line) of radar and the calculated value by CWT was 3.1 meters, showing that the CWT method is also accurate. These results suggest that a marine X-band radar system is a viable method of monitoring the breaking ocean waves.

• Journal of the Korean Society of Combustion
• /
• v.12 no.4
• /
• pp.1-7
• /
• 2007

Carbon monoxide (CO) is not only an important intermediate species in chemical reaction mechanisms of hydrocarbon fuel combustion, but also a crucial pollutant species emitted from automotive engines. To better understand the physical processes impacting CO emissions, the development of laser-based measurement techniques that can visualize in-cylinder CO distributions is desirable. Among these techniques, Laser-Induced Fluorescence (LIF) is a sensitive and species-selective detection technique capable of good spatial resolution. However, some technical matters such as deep UV excitation, severe pressure dependency of the LIF signal, and potential interference from other species have been major challenges for CO LIF application. This study is focused on investigating the feasibility of CO two-photon LIF in a direct-injection diesel engine operating at typical pressure and temperature conditions with commercial grade diesel fuel. Spectroscopic analysis shows that the CO fluorescence signal can be separated from $C_2$ Swan band or broadband fluorescence from PAHs when the signal is collected near 483 nm. The signal-to-noise ratio of CO LIF deteriorate rapidly as pressure is increased, following $P^{-1.49}$ which matches the theoretical signal pressure dependency.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.37-44
• /
• 2006

Solvent-free low foaming scouring agents (LFSC) were prepared by blending of 2-ethylhexylaminoethyl sulfate (2-EHAS), POE(10) octadecylbenzyl- ammonium chloride (POBAC) and Sedlan FF-200 (FF-200). As the results of several tests, 2-EHAS/POBAC/FF-200/water (8g/12g/20g/60g) mixture (LFSC-5) showed good cleaning power, penetrating ability and stability to alkali, and gave less problem in water pollution. The foaming power of LFSC-5 measured by Ross and Miles method was 8mm foam height immediately after foaming, and that measured by Ross and Clark method was less than 300mm foam height at $30^{\circ}C$, and 18mm at $80^{\circ}C$. As a result, LFSC-5 proved a good low foaming scouring agent for fiber.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.2
• /
• pp.156-163
• /
• 2004

Low foaming scouring agents (LSSA) were prepared by blending of amine salt of dodecylbenzene sulfone, poly (PO-b-EO) glycol, Newpol PP-2000, MJU-100, ethylene glycol and organic solvent. As the results of several tests, LSSA-2 showed good scouring effect, penetrating ability and emulsifiability, and showed not much water pollution. The foaming power of LSSA-2 measured by Ross & Miles method was 11mm foam height immediately after foaming. And the foaming power of LSSA-2 measured by Ross & Clark method were less than 310mm foam height at $30^{\circ}C$, 17mm at $80^{\circ}C$. As a result, LSSA-2 was proved as a good foaming scouring agent.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.647-650
• /
• 2006

Compact Airborne Spectrographic Imager (CASI) hyperspectral imagery was acquired over the Little Miami River Watershed (1756 square miles) in Ohio, U.S.A., which is one of the largest hyperspectral image acquisition. For the development of a 4m-resolution land cover dataset, a hierarchical approach was employed using two different classification algorithms: 'Image Object Segmentation' for level-1 and 'Spectral Angle Mapper' for level-2. This classification scheme was developed to overcome the spectral inseparability of urban and rural features and to deal with radiometric distortions due to cross-track illumination. The land cover class members were lentic, lotic, forest, corn, soybean, wheat, dry herbaceous, grass, urban barren, rural barren, urban/built, and unclassified. The final phase of processing was completed after an extensive Quality Assurance and Quality Control (QA/QC) phase. With respect to the eleven land cover class members, the overall accuracy with a total of 902 reference points was 83.9% at 4m resolution. The dataset is available for public research, and applications of this product will represent an improvement over more commonly utilized data of coarser spatial resolution such as National Land Cover Data (NLCD).

• Journal of Korean Society of Transportation
• /
• v.4 no.2
• /
• pp.37-58
• /
• 1986

Since 1960's there have been conducted quite numbers of origin and destination (0-D) surveys in Korea, Most of them, however, were to be said not so successful. In this paper, it was investigated that why the previous 0-D surveys were failed, and that how it could be improved. The findings of this study are: 1. The collection of sample data itself was performed relatively well, but the problem was in the improper expansion methods which were applied. 2. To improve the expansion methods, it should be performed not only the dwelling unit-based sample surveys but also commercial vehicle survey, cordon line survey, screen line counts and other auxiliary travel surveys like transit patronage survey, vehicle miles survey etc. at the same time. 3. To expand the sample surveyed data in a proper way, the adjustment factors should take a disaggregate form and also should be applied not to the specific trips, but to the specific trip makers to avoid the bias which could be caused by the application of adjustment factors in a way that has been used previously. 4. If there is no considerable change in travel patterns, we can synthesize the present 0-D data with past surveyed sample data, using present statistic data in the same way which was developed in this paper when expanding and adjusting sample data.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.25-32
• /
• 2001

Doosan Construction & Engineering Co., Ltd is building a railway tunnel beneath the Soo-Young River connecting MinLak Station and Centum City Station, a section 230, subway line 2, Pusan City, Korea. When completed the tunnel will have a finished inner diameter of 6.5m(21.311) throughout its total length of 840m(420m = 0.52 miles, Two Single Track Tunnel : 420m＋420m). The ground profile of the face toward shield machine is composed of multi layers, silty clay, clayey gravel, soft rock etc. This research paper is to predict ground deformation and variation of stresses around tunnel using Hyperbolic model, and to reflect the works on the next shield tunneling project. And this research paper is analyzed data of measuring instrument (such as settlement gauge, inclinometer, Multiple extensometer, etc.) which is installed along tunnel line for safety of tunnel. For calculations, the finite difference Method is applied. Backfill grouting material is supposed to have instantly strength of 10kg/$\textrm{cm}^2$ above, although its strength is available after 24 hours passed.