• 한국군사과학기술학회지
• /
• 제21권3호
• /
• pp.370-378
• /
• 2018

The mission data in missile systems should be quickly and reliably transmitted from a mission transmission device to a guidance control unit. The MIL-STD-1553B is one of the reliable communication standards, but its bit rate is generally limited to 1Mbps due to the intrinsic properties of its electrical design. Therefore, the bus controller needs to be optimized to efficiently transmit the mission data on the inevitably limited bit rate. This paper proposes an analytical approach based on sampling-based optimization methods to maximize the data throughput without data loss. The proposed approach was evaluated in the simulations with the data transmission model for the MIL-STD-1553B communication system. The results of the proposed methods were applied to a real-time system and showed that the proposed method was successfully performed.

• 한국통신학회논문지
• /
• 제37C권11호
• /
• pp.1129-1137
• /
• 2012

전술데이터링크체계의 무선네트워크(이후 무선링크로 언급)는 전술자료를 실시간으로 공유할 수 있도록 디지털화된 전술통신 네트워크를 제공하는데 그 목적이 있다. 무선링크의 다중접속방식은 신뢰성 높은 실시간 전술자료의 교환을 위하여 설치 대상 노드의 운용환경에 따라 시분할다중접속방식(TDMA, Time Division Multiple Access)과 반송파 감지 다중접속방식(CSMA, Carrier Sense, Multiple Access)으로 운용된다. 본 논문에서는 기본적으로 TDMA로 설계된 시스템에서 MIL-STD-188-220 기반 CSMA를 운용하고자 할 때 그 운용 가능성을 검증하였으며, 이를 위한 확률적 분석기법을 제안한다. 그리고 실제장비에 기술 구현 후 그 성능을 이론치와 비교 분석하였다.

• 한국컴퓨터정보학회논문지
• /
• 제13권4호
• /
• pp.161-167
• /
• 2008

본 논문에서는 여러 대의 무전기간에 음성 및 데이터 정보를 원활하게 송수신 해 주는 전술 무선 이동 Ad-hoc 프로토콜인 MIL-STD-188-220C를 이용하여 VoIP통신을 하기 위한 패킷 크기 산출 및 전달 방법에 대해 연구하였다. 먼저 예상 데이터 전송시간을 산출한 후 사용자 입장에서의 VoIP 음성 품질과 무전기에서의 데이터 전송품질 요구수준을 동시에 고려하여 음성 패킷 길이 결정 및 패킷 전달 방법을 제시하였다. 전송 속도가 36Kbps인 무전기에서의 VoIP통신의 경우에는 90ms 재전송 패킷과 90ms 샘플링 패킷을 모아 짧은 프레임으로 전송하는 방법이 효율적이고, 36Kbps 이상의 경우에는 샘플링 패킷들을 1초 이상 모아서 전송 후 필요에 따라 재전송을 요청하는 방법을 고려할 수 있었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.92-102
• /
• 2017

Purpose: Reliability prediction standards consider environmental conditions, such as temperature, humidity and vibration in order to predict the reliability of the electronics components. There are many types of standards, and each standard has a different failure rate prediction model, and requires different environmental conditions. The purpose of this study is to make a sensitivity analysis by changing the temperature which is one of the environmental conditions. By observing the relation between the temperature and the failure rate, we perform the sensitivity analysis for standards including MIL-HDBK-217F, RiAC-HDBK-217Plus and FIDES. Methods: we establish environmental conditions in accordance with maneuver weapon systems's OMS/MP and mission scenarios then predict the reliability using MIL-HDBK-217F, RiAC-HDBK-217Plus and FIDES through the case of DC-DC Converter. Conclusion: Reliability prediction standards show different sensitivities of their failure rates with respect to the changing temperatures.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.422-429
• /
• 2013

MIL-STD-1553B communication is globally used in the area of aerospace and defense which require safety and reliability in spite of its low communication speed. As recently increased requirements for high precision and robust guidance ability of missiles, missile sensor equipment needs more data to satisfy those requirements. Therefore, missile systems to adopt MIL-STD-1553B requires higher data transfer and processing capability than those of the current systems. In this paper, we describe the result of analysis and implementation of the existing methods that applied multi-message chain and double buffers to improve the current missile system.

• 한국멀티미디어학회논문지
• /
• 제24권2호
• /
• pp.199-207
• /
• 2021

It is very important to support real-time on the inspection equipment based on Windows. In particular, in the system using MIL-STD-1553B communication, which is widely used in military weapon systems, real-time is required for inspection equipment that uses mostly platforms based on Windows such as Industrial PCs. However, in order to use a complete real-time operating system such as VxWorks, the purchase cost is expensive and the implementation is complicated on the system, so it is not suitable for inspection equipment that requires simple functions to just check go or no-go. Therefore, in this paper, a Real-Time implanted Kernel(RTiK) in the Windows kernel is implanted in order to improve these defects, and real-time performance is implemented for periodically MIL-STD-1553B communication by Deferred Procedure Call(DPC) of Windows. Also, it was verified that the period of up to 2ms was guaranteed with a RDTSC into the EDX:EAX registers for measuring the periodicity.

• 품질경영학회지
• /
• 제35권2호
• /
• pp.27-36
• /
• 2007

A study to build a reliability model of electronic ballasts for the fluorescent lamp has been performed in this study. We selected the widely being used specification, MIL-HDBK-217 for the study. We briefly reviewed the basic concepts of the electronic ballast with the selected reliability specification. We then developed a reliability model for the ballast using MIL-HDBK-217 and predicted the reliability. We further provided some guides which should be considered in future model development.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.459-462
• /
• 2003

선박에 탑재되는 기기나 장비는 선박으로부터 받게 되는 진동환경에서 성능이 지속적으로 유지되어야 하므로 이에 대한 내구성능이 요구된다. 일찍이 미국 해군에서는 함정 탑재기기의 환경진동시험에 관하여 MIL-STD-167-1$^{(3)}$ 에 규정하고 이에 따라 환경진동에 대한 내구성능 입증을 요구하고 있다. 우리나라 해군도 이 표준을 그대로 적용하여 시행하고 있다. 반면에, 일반선박의 경우에는 함정에서와 같이 엄격하게 탑재기기의 진동 내구성능시험을 요구/시행되고 있지 않다. 1996년에 국제표준화기구(중략)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.761-765
• /
• 2001

Shock responses of the MIL-S-901D standard floating shock platform("SFSP") subject to underwater explosions(UNDEX) are analyzed by using the LS-DYNA/USA. For the analysis, surrounding fluids as well as the SFSP are included in a 3D FE model to consider the cavitation effects of the UNDEX shock wave. The calculated results are compared with the existing test results and it is confirmed that the analysis results predict accurately the shock behaviors of the SFSP.

• 품질경영학회지
• /
• 제24권1호
• /
• pp.110-125
• /
• 1996

Since 1975, Korean defence quality system has been operated by adopting defence specifications, 0050-0015, 0050-0029 and 0050-0030, which were based on the American specifications, MIL-Q-9858, MIL-Q-45208 and MIL-STD-45662. The trend that the ISO certification is intensively required for the international trade, and the need for modernization of the Korean military forces, however, provide motivation to revise the defence quality system. In this study, an improved defence quality system has been proposed by the comparison study among the requirements prescribed in ISO 9000, AQAP 100 series, MIL-Q-9858.