• Korean Journal of Agricultural Science
• /
• v.29 no.1
• /
• pp.8-14
• /
• 2002

Spray of maleic hydrazide (MH) was confirmed to be highly effective on the inhibition of lateral shoot growth regardless of grape cultivars and application concentration examined in this experiment. The optimal spray times were 30 days aft er full bloom in 'Kyoho' and 35 days in 'Campbell Early'. However, the optimum season of application should be adjusted depending on the vine vigor. The apical buds of lateral shoot was significantly affected at the concentration of $3,900mg{\cdot}L^{-1}$ resulting in the death and/or abscission. Thus the optimal concentration of MH seemed to be $1,950mg{\cdot}L^{-1}$. The inhibition effect by MH application was derive d from the decrease of node number and length. No adverse effect on fruit quality was found by MH application. In contrast, there was a tendency of anthocyanin in crease in 'Campbell Early' grapes. Results indicated that MH could be an effective agent to reduce the labor charge through the inhibition of later shoot growth.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.3
• /
• pp.19-28
• /
• 1996

In Asia countries the productions of ship building and marine engines have been increasing, specially Japanese marine industries have worked hard after 1960s and Korean ones after 1980s. Recently the other countries, as Taiwan and China, have been working so that these hour Asian countries are occuping the high level of shared ratio of productions for gross tonnages and horse powers, which are 74 and 64[%] of the world ones ($8.6\times10$+6[GT], $8.6\times10$+6[PS]) in 1994. Korean industries had the highest shared ratio of production of tanker vessel and 2 stroke diesel engine as 45[%]($2.2\times10$+6[GT]) and 37[%]($1.0\times10$+6[PS]) which were more than those of Japan as 34 and 16[%] in 1989 respectively. Some marine databases and their network links among Asian countries are proposed due to the posibility of collection and analyses with their own specifications by the marine industries and operators as well as Japanese ship reliability investigation works(SRIW) like SRIC in Japan. During 1966 and 1996 16 times of SRIW in Japan have been carried out by ship reliability investigation group(SRIG) in Japan. There have been collected and evaluated a great number of field data of failures and maintenances($700\times10$+3[occ], $1.6\times10$+6[MH}) during running hours($13.4\times10$+6[Hrs]), from which many kinds of evaluation indices could be gotten as the three indices of occurring rate$\lambda$(52.2[occ/1000Hrs]), average man-hour mh(2.29[MH/occ]) and manning index MI(119[MH/1000Hrs]). An estimation example having the three indices$\lambda$, mh and MI were shown by the SRIC 1990 Data Base in Japan for the two kinds of fuel oil suppling subsystems which are dual fuel oil one(DFOS) and mono fuel oil one(MFOS). Three indices MI, and mh for DFOS and MFOS results in 7.16 and 5.20[MH/1000Hrs], 2.63 and 2.06[occ/1000 Hrs]. Therefore the more simple subsystem MFOS can save approximately 30[%] of maintenance load. Finlly an utilization methods are shown for the SRIC in Japan by means of computer system and worlwide internet links.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.768-773
• /
• 1998

A mathematical model of discharge mechanism of metal-hydride (MH) electrode was presented. A computer simulation program was developed in order to predict the variation of electrode potential and the distribution of hydrogen concentration within MH particles during discharge. By investigating the effects of the discharge current density, the size of MH particle, the diffusivity of hydrogen in MH particle, and the porosity of the electrode, it was found that these factors exerted a collective effect on the discharge characteristic of the electrode and the utilization of hydrogen in the MH particle. It was confirmed that and optimization of design factors of an MH electrode is necessary in order to execute a high-rate discharge and to improve the utilization of hydrogen in MH particle.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.326-333
• /
• 2014

This study was conducted to investigate the fishing efficiency of an improved LED fishing lamp for squids. A total of 31 fishing operations were carried out with six-crew commercial fishing vessel Haengbok-Ho (24 tons) on which 43.2kW LED was installed, along with 14 automatic jigging machines, from October 6 to November 16, 2012. The 19 fishing vessels with Haengbok-Ho were compared with a control subject was 24 tons or 29 tons. A total illuminating power of metal halide (MH) fishing lamps in the control fishing vessel was either 84kW or 120kW. The number of automatic jigging machines in the control vessels was 8-18 and the number of crews engaged for fishing operation was 3-13. Average fuel consumption of LED fishing vessels during fishing operation was 505.1l which led to an average fuel consumption of 42.7l per hour. LED fishing vessel and MH fishing vessel caught on an average 1,946 squids and 2,439 squids, respectively, during the study period. Crews (hand line and hand reel) caught about 2.2 times the automatic jigging machines for LED fishing vessel and about 2.1 times for MH fishing vessel. Meanwhile, catches by the fishing vessels with LED in the combined total number per one line of automatic jigging machine and per crew were 86.6% of that of the control fishing vessel with MH. Also, fishing vessels with LED per automatic jigging machine achieved 71.8% of catches of that with MH fishing lamp. The catches of squids per the fishing vessel with 1W LED fishing lamp were higher by more than 135.5% of that in the fishing vessel with MH, which showed a good fishing performance even with only the use of a LED fishing lamp.

• 한국전기화학회:학술대회논문집
• /
• 2005.04a
• /
• pp.25-25
• /
• 2005

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.568-574
• /
• 1997

The effect of microencapsulation of maetal hydride (MH) with copper on the electrode performance of a Ni/MH battery has been investigated. The MH electrodes were prepared with a combination of cold press and paste methods. The discharge capacity of the electrode increased with an addition of small amounts if CMC into the electrode, but decreased when heat-treated in an oxygen-free nitrogen flow. The capacity of a Cu-coated $LaNi_5$ electrode was higher than that of LaNi5electrode. The discharge capacity of the electrode prepared with Cu-coated $LaNi_5$ increased with the increase of copper content in the electrode. It is considered that the increase of copper content enhanced the current density on the electrode surface, leading to the increase of the discharge capacity The MH electrode coated by an acidic electroless plating method showed much higher discharge capacity than that using an alkaline electroless plating method. The discharge capacity of the $LaNi_{4.5}Al_{0.5}$ electrode was higher than that of the $LaNi_5$ electrode. Also, the effect of microencapsulation on the deactivation of $LaNi_5$ was studied using an absorption-desorption cycle in CO-containing hydrogen.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.31 no.2
• /
• pp.1-17
• /
• 2018

Objectives: The purpose of this study is to investigate the effect of Melandrii Herba (MH), Akebia Quinata Decaisne (AQ), and Tetrapanax Papyriferus (TP) on milk secretion and aquaporin (AQP) expression in lactating mice. Methods: For the experiment, the mice were divided into three groups, which were orally administered MH (2,720 mg/kg), TP (400 mg/kg) and AQ (2,800 mg/kg) extracts respectively for 3 weeks from Day 1 after the birth, compared with the control group (C group), which was administered distilled water. A group consisted of six infantile mice per postpartum mouse. For comparison with the C group, non-pregnant SKH-1 mice were used as the virgin group. Results: 1. When it comes to the immunohistochemical staining for prolactin receptors in the mammary glands, the AQ and MH groups showed a strong immune response to the secretory epithelial cells constituting the mammary alveoli, while the TP group represented a weaker immune response. 2. In the immunohistochemical staining for AQP in the mammary glands, AQP1 showed a strong immune response in the walls of capillaries and venules around the mammary alveoli, and AQP3 in the epithelial cells constituting the mammary alveoli, and AQP5 in some tissues between the mammary alveoli. AQP1 was expressed in the order of TP group>AQ group=C group>MH group, and AQP3 was MH group and AQ group>TP group=C group, and AQP5 was MH group>C group>AQ group and TP group. 3. In the Western blot, AQP1 was expressed in the order of TP group>AQ group>C group>MH group, and AQP3 was MH group>AQ group>C group>TP roup, and AQP5 was MH group>TP Group>C group>AQ group. All of AQP1, 3, 5 expression were significantly higher in the C group than in the Virgin group. Conclusions: The administration of Akebia Quinata Decaisne, Tetrapanax Papyriferus and Melandrii Herba have the effect of improving prolactin levels in postpartum mice and increasing the expression of prolactin receptor and AQPs in the mammary glands, suggesting that lactation might be enhanced by the development of the mammary glands.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.4
• /
• pp.418-424
• /
• 2006

In order to improve the activation properties of the $AB_2$ type hydrogen storage alloys for Ni-MH battery, the alloy surface was modified by employing high energy ball milling. The $Zr_{0.54}Ti_{0.45}V_{0.54}Ni_{0.87}Cr_{0.15}Co_{0.21}Mn_{0.24}$ alloy powder was ball milled for various period by using the high energy ball mill. As the ball milling time increased, activation of the $AB_2$ type composite powder electrodes were enhanced regardless of additives. When the ball milling time was small discharge capacities of the $AB_2$ type composite powder electrodes increased with the milling time. On the other hand for large milling time it decreased with increasing milling time. The maximum discharge capacity was obtained by ball milling for 3-4 min.

• Journal of Animal Science and Technology
• /
• v.59 no.3
• /
• pp.6.1-6.6
• /
• 2017

Background: This study was aim to observe the effects of feeding mixed local hay (MH) consisted of 55% orchard grass (Dactylis glomerata L.), 35% tall fescue (Festuca arundinacea) and 10% red clover (Trifolium pratense) to Hanwoo steers on performance, carcass characteristics and meat quality (longissimus thoracis) compared with feeding imported timothy hay (TH) and local rice straw (RS). Results: Although no significant effects were found on animal performance and carcass yield grade, the carcasses of MH group had higher marbling score and quality grade than those of RS and TH group (P < 0.05). Therefore, higher fat content (P < 0.001), lower shear force and hardness value in the beef of MH group than that of other groups were observed. Furthermore, the beef of MH group had higher CIE $a^*$ value (redness) than that of other groups and feeding MH to Hanwoo steers lowered n-6 to n-3 fatty acids ratio in beef. Conclusions: Mixed hay provided benefits on meat quality and could be used for Hanwoo fattening program.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.295-296
• /
• 2016

본 논문은 ATSC2.0 기반 8-VSB/MH 융합형 3DTV (A/104 Part 5 Service Compatible 3DTV using Main and Mobile Hybrid Delivery) 방식 다중화기 개발에 대한 내용을 기술한다. ATSC A/104 Part 5 SC-MMH 3DTV 방식은 미국의 지상파 DTV 표준화 논의단체인 ATSC 에서 고정 HD 서비스를 위한 8-VSB 채널과, In-band 모바일 TV 서비스를 위한 ATSC M/H 채널을 이용하여, 주파수 효율을 극대화한 새로운 개념의 3D 콘텐츠 전송기술을 도입한 HD 급 지상파 3DTV 방식으로 2014 년 8 월 융합형 3DTV 서비스 시그널링 방안 및 2015 년 10 월 부가정보(VEI: Video Enhancement Information)를 이용한 화질개선 기술을 ATSC 3DTV Standard 로 채택하였다. 본 논문에서는 이와같은 8-VSB/MH 융합형 3DTV Head-End 핵심장비인 8-VSB/MH 융합형 3DTV 다중화기 구현에 대한 내용을 기술한다.