• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.526-532
• /
• 2006

The aim of this study was to evaluate the chemical composition, in vitro DM degradability, ME and OMD of alfalfa-maize silage mixtures in comparison to pure maize and alfalfa silages, and to test the existence of associative effects of ensiling alfalfa forage with whole-crop maize using the in vitro gas production technique. Ensiling alfalfa with whole-crop maize had a significant (p<0.001) effect on chemical composition, pH, in vitro DM degradability, OMD and estimated ME values of mixtures. DM content of the resultant silages significantly increased with increasing proportion of whole-crop maize in the mixtures, whereas the pH value, crude protein (CP), acid detergent fibre (ADF) and ash contents of mixtures decreased due to the dilution effect of whole-crop maize which was low in CP, ADF and ash. The pH values of all alfalfa-maize silage mixtures were at the desired level for quality silage. Gas production of alfalfa-maize silage mixtures at all incubation times except 12 h increased with increasing proportion of whole-crop maize. When alfalfa was mixed with whole-crop maize in the ratio 40:60, ME and OMD values were significantly (p<0.001) higher than other silages. Maximum gas production ($A_{gas}$) ranged from 65.7 to 78.1 with alfalfa silage showing the lowest maximum gas production. The results obtained in this study clearly showed that maximum gas production increased with increased percentage of whole-crop maize in the silage mixtures (r = 0.940, p<0.001). It was concluded that ensiling alfalfa with whole-crop maize improved the pH, OMD and ME values. However, trials with animals are required to see how these differences in silage mixtures affect animal performance.

• Advances in Traditional Medicine
• /
• v.8 no.3
• /
• pp.222-227
• /
• 2008

Citrus aurantium var. amara L., commonly known as 'bitter orange' or 'sour orange', of the family Rutaceae, has traditionally been used in the treatment of various ailments, and it possesses different types of pharmacological properties. As a part of our on-going studies on the plantsfrom the Iranian flora, the extract of C. aurantium var. amara has been studied for its weight lossproperties using the mice model. While the Sep-Pak fraction, 20% methanol (MeOH) in water, of the hydro-methanolic extract of the peels of C. aurantium var. amara fruits, when injectedintraperitoneal (i.p.) at a dose of 10 mg/kg, significantly decreased the level of weight gain of the mice in comparison with control the group (P < 0.01), the Sep-Pak fraction 80% MeOH in water decreased the initial weight of mice by 0.44% in six weeks. The administration of the total extract(10 and 20 mg/kg, i.p.), and the Sep-Pak fractions, 40% and 60% MeOH in water (10 mg/kg, i.p.)did not show any significant change of weight of the test mice. Of the two active fractions, the80% MeOH in water fraction did not show any noticeable adverse effects on mice, and was therefore analysed by reversed-phase preparative high performance liquid chromatography resulting in the isolation and identification of four major components, two coumarins, meranzin hydrate (1) and bergamottin (2), and two flavonoids, xanthomicrol 5,4'-di-methyl ether (tangeritin, 3) and hymenoxin 5,7-di-methyl ether (nobiletin, 4).

• Korean journal of applied entomology
• /
• v.57 no.1
• /
• pp.51-52
• /
• 2018

Out of 60 quarantine insect pests in Korea, 42 species are classified into tephritid fruit flies. Most of these fruit flies are attracted to two natural products, methyl eugenol (ME) or raspberry ketone. Paraffin wax has been devised to formulate these lures. The formulated lures were applied to field test in Taiwan to attract quarantine fruit flies. Wax-ME formulation was installed in Delta trap and could attract 60-80 males of B. dorsalis per day during late August, while a wax formulation of Cue-lure (a methylated compound of raspberry ketone) attracted both B. cucurbitae and B. tau. These wax formulations can be applied to monitor these three quarantine species in Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.724-734
• /
• 2007

Statement of problem. Translucency and masking effect of provisional crown and fixed partial denture materials is an important esthetic consideration. But, provisional resin materials differ substantially in their ability to mask underlying colors. Purpose. The purpose of this study was to evaluate the translucency differences of provisional resin materials at various thicknesses and the correlation between the translucency and the masking efficiency. Material and methods. Two polymethyl methacrylate resins (Jet Tooth Shade, Alike) and three resin composites (Protemp 3 Garant, Luxatemp and Revotek LC) were used. Specimens (n=6) were fabricated from each material in 0.3, 0.5, 0.8, 1.0, 1.5, 2.0 and 3.0 mm thickness. The CIELAB parameters of each specimens were measured using a spectrophotometer. The translucency parameter (TP) values and the masking effect $({\Delta}ME^*{_{ab}})$ values were computed and all data were statistically analyzed by one-way ANOVA and the multiple comparisons Scheffe test. The correlation between the thickness and the TP values and the correlation between the thickness and the ${\Delta}ME^*{_{ab}}$ values were also evaluated by correlation analysis and regression analysis. Results. The TP values and the ${\Delta}ME^*{_{ab}}$ values were significantly related to the thickness in all specimens. The TP values were more sensitive to the change of thickness than the ${\Delta}ME^*{_{ab}}$ values. The order of the translucency by brand was different from the order of the masking effect by brand in all thickness groups. Conclusion. Within the limitations of this study, the translucency and masking effect of the provisional resin materials investigated were significantly related to their thickness. The masking effect of provisional resin was correlated with the translucency parameter, but the order of the masking effect by brand was different from the order of the translucency parameter.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.5
• /
• pp.248-258
• /
• 2023

PURPOSE. This study aims to evaluate the effects of exposure energy on the lateral resolution and mechanical strength of dental zirconia manufactured using digital light processing (DLP). MATERIALS AND METHODS. A zirconia suspension and a custom top-down DLP printer were used for in-office manufacturing. The viscosity of the suspension and uniformity of the exposed light intensity were controlled. Based on the exposure energy dose delivered to each layer, the specimens were classified into three groups: low-energy (LE), medium-energy (ME), and high-energy (HE). For each energy group, a simplified molar cube was used to measure the widths of the outline (X_o and Y_o) and isthmus (X_i and Y_i), and a bar-shaped specimen of the sintered body was tested. A Kruskal-Wallis test for the lateral resolution and one-way analysis of variance for the mechanical strength were performed (α = .05). RESULTS. The zirconia green bodies of the ME group showed better lateral resolution than those of the LE and HE groups (both P < .001). Regarding the flexural strength of the sintered bodies, the ME group had the highest mean value, whereas the LE group had the lowest mean value (both P < .05). The ME group exhibited fewer agglomerates than the LE group, with no distinctive interlayer pores or surface defects. CONCLUSION. Based on these findings, the lateral resolution of the green body and flexural strength of the sintered body of dental zirconia could be affected by the exposure energy dose during DLP. The exposure energy should be optimized when fabricating DLP-based dental zirconia.

• Journal of the Korean Vacuum Society
• /
• v.8 no.1
• /
• pp.9-12
• /
• 1999

An electron energy analyzer for Angle Resolved Ultraviolet Photoelectron Spectroscopy (ARUPS) has been constructed and tested. This analyzer consists of tandem 3 element electron lenses and two concentric hemispherical capacitors. Electronic structure of clean Cu(100) surface has been studied to test the feature of the analyzer. The ultimate energy resolution is 40 me V and angle resolution is $0.2^{\circ}$.

• KSBB Journal
• /
• v.7 no.1
• /
• pp.21-26
• /
• 1992

In order to examine the presence of brassinosteroid substance in sea mustard(Undaria pinnatifida), leaves of sea mustard were extracted with MeOH. The extract was purified by slovent fractionation, counter current distribution, silica gel adsorption chromatography, charcoal adsorption chromatography, Bondesil chromatography, and reverse phase HPLC, successively. The activity was monitored by the rice inclination test and its prescence could be confirmed in each purification step. Although sea mustard contained a less amount of the active substance than the vegetative tissue of higher plants, brassinosteroid was clearly present endogenously in sea mustard. We acknowledge that our work is probably the first publication reporting the presence of brassinosteroid in marine algae plants.

• Journal of Fashion Business
• /
• v.11 no.3
• /
• pp.69-78
• /
• 2007

This study explored the perceptions of Korean college women concerning their clothing deprivation and clothing decision factors. A convenience sample was used consisting of 101 female college students aged from 18 to 36 years, with a mean age of 20.78 (SD = 4.24). Descriptive statistics were used to develop a profile of the participants. To test the research objectives, multivariate analysis of variance (MANOVA), using Wilk's lambda criterion was conducted for the study. The results indicated that a college woman's year significantly influences her perceived clothing deprivation, at p =0.003 (Wilk's lambda). There was a significant positive correlation (r = 0.24, p= 0.02) between college year and perceived clothing deprivation for special occasion clothes. The two clothing decision factors clothes that fit me well and clothes that look best on me were found to be the top two factors determining clothing decisions for the study participants.

• Journal of Biosystems Engineering
• /
• v.8 no.2
• /
• pp.62-68
• /
• 1983

This study was to examine the drying characteristics of barley and the effect of moisture content of barley on milling performance. A barley variety, Jogang, having 35.0% of initial moisture content was used for this experiment. Thermo-hydrostatic dryer which consists of blower, condensor, heater, humidifier, drying chamber and control box, etc., was used for the drying experiment. The change in the weight of a barley sample was continuously measured by means of the ring type load cell installed inside the drying chamber. Milling test runs the samples having the predetermined moisture content were taken from each drying test run. A laboratory type barley miller was used for the milling test. The results of the study are summarized as follows: 1. The drying constants (k) applied for the thin layer drying model, (M-Me)/(Mo-Me) = $Ae^{-kt}$ were 0.155, 0.259 and 0.548, respectively, at the three levels of drying temperatures, $40^{\circ}C$, $50^{\circ}C$ and $60^{\circ}C$. The drying constants complied with the Arrhenius Equation, K = Ko exp (-C/T), were determined as $Ko=1.901455{\times}10^8$ and C = 6563. 2. The laboratory milling test indicated that the highest milled and head barley recovery was resulted from the sample which was dryed at $40^{\circ}C$. In general, the increase in the drying temperature from $40^{\circ}C$ to $60^{\circ}C$ indicated a negative effect on milling yields. 3. Also, the sample having 15% M.C. presented the highest milled and head barley recovery among the five moisture content levels (12, 15, 18,21 and 24%).

• Korean Journal of Veterinary Service
• /
• v.34 no.2
• /
• pp.159-166
• /
• 2011

This study was carried out to develope enzyme-linked immunosorbent assay (ELISA) for detection of canine brucellosis in dogs experimentally inoculated with Brucella abortus 1119-3 and B. canis RM666. Groups A, B and C of dogs (each group consisting of three dogs) were orally inoculated with approximately $5{\times}10^9$ colony-forming units of B. abortus and B. canis, and with sterile pyrogen-free PBS, respectively. The animals were monitored at regular intervals upto the 12th week post inoculation (PI) by standard tube agglutination test (STAT), plate agglutination test (PAT), Rose Bengal test (RBT), 2-mercaptoethanol rapid slide agglutination test (2ME-RSAT) and ELISA. The induced antibody titers in group A dogs were detected from the first week PI to the eighth week PI in STAT, PAT and RBT using the inactivated whole cells of B. abortus 1119-3 as antigens, while no sera in groups B and C dogs reacted with the antigens. In 2ME-RSAT using whole cells of B. canis M-strain as antigens, the induced antibody titers in group B dogs were observed at the second week PI and persisted for the 12th week PI, while sera of groups A and C dogs did not react with the whole cells. In ELISA using cytoplasmic fractions antigen of B. abortus 1119-3, the mean optical density of antibodies in groups A and B was detected from the first and second weeks PI, respectively, and persisted for 12th week PI, while sera of group C did not cross-react with the fractions antigen. However, in ELISA using the hot saline extracts of B. canis M- as an antigen, the induced antibody titers in only group B dogs were detected from second week PI and persisted for until the end of this study. These results indicate that the ELISA using B. abortus 1119-3 cytoplasmic fractions as antigens can be a good candidate for detection of brucellosis by B. abortus as well as B. canis in dogs.